Items where Research Institute, Centre or Group is "Materials and Engineering Research Institute > Engineering Research"

Up a level
Export as [feed] RSS
Group by: Creators | Year | Item Type | Full Text | No Grouping
Jump to: A | B | C | D | E | F | G | J | L | M | N | P | R | S | T | W | Y
Number of items at this level: 77.


ABOUTALEBI, S.H., AMINORROAYA YAMINI, Sima, NEVIRKOVETS, I., KONSTANTINOV, K. and LIU, H.K. (2012). Enhanced hydrogen storage in graphene oxide-MWCNTs composite at room temperature. Advanced Energy Materials, 2 (12), 1439-1446.

ABOUTALEBI, S.H., JALILI, R., ESRAFILZADEH, D., SALARI, M., GHOLAMVAND, Z., AMINORROAYA YAMINI, Sima, KONSTANTINOV, K., SHEPHERD, R.L., CHEN, J., MOULTON, S.E., INNIS, P.C., MINETT, A.I., RAZAL, J.M. and WALLACE, G.G. (2014). High-performance multifunctional Graphene yarns: Toward wearable all-carbon energy storage textiles. ACS Nano, 8 (3), 2456-2466.

AHMED, M Shuja, SAATCHI, Reza and CAPARRELLI, Fabio (2013). An Efficient Approach To Object Recognition For Mobile Robots. In: BENAVENTE-PECES, Cesar and FILIPE, Joaquim, (eds.) Proceedings of the 3rd International Conference on Pervasive Embedded Computing and Communication Systems. Scitepress, 60-65.

AHMED, M Shuja, SAATCHI, Reza and CAPARRELLI, Fabio (2013). Implementation Of Distributed Mosaic Formation And Object Detection In Modular Robotic Systems. In: Proceedings of the 3rd International Conference on Pervasive Embedded Computing and Communication Systems. Scitepress, 135-138.

AL-ALI, Omar Al-kharji, ANANI, Nader, AL-QUTAYRI, Mahmoud and AL-ARAJI, Saleh (2015). Initialization for time delay digital tanlock loop. In: 2015 International Conference on Information and Communication Technology Research (ICTRC), Abu Dhabi, 17-19 May 2015. 108-111.

AMINORROAYA YAMINI, Sima, BREWIS, M., BYRNES, J., SANTOS, R., MANETTAS, A. and PEI, Y.Z. (2015). Fabrication of thermoelectric materials-thermal stability and repeatability of achieved efficiencies. Journal of Materials Chemistry C, 3 (40), 10610-10615.

AMINORROAYA YAMINI, Sima and DIPPENAAR, R. (2008). TEM analysis of centreline sulphide precipitates modified by titanium additions to low carbon steel. Journal of Microscopy, 232 (1), 123-129.

AMINORROAYA YAMINI, Sima and DIPPENAAR, R. (2007). TEM characterization of precipitates in the segregated regions of a low-carbon, low-manganese, titanium-added steel. Journal of Microscopy, 227 (2), 92-97.

AMINORROAYA YAMINI, Sima and DIPPENAAR, R. (2007). A novel approach to simulate segregation at the centreline of continuously cast steel using laser-scanning confocal microscopy. Journal of Microscopy, 227 (2), 87-91.

AMINORROAYA YAMINI, Sima, IKEDA, T., LALONDE, A., PEI, Y., DOU, S.X. and SNYDER, G.J. (2013). Rational design of p-type thermoelectric PbTe: Temperature dependent sodium solubility. Journal of Materials Chemistry A, 1 (31), 8725-8730.

AMINORROAYA YAMINI, Sima, LI, T., MITCHELL, D.R.G. and CAIRNEY, J.M. (2016). Elemental distributions within multiphase quaternary Pb chalcogenide thermoelectric materials determined through three-dimensional atom probe tomography. Nano Energy, 26, 157-163.

AMINORROAYA YAMINI, Sima, LIU, H.K., CHO, Y. and DAHLE, A. (2010). Microstructure and activation characteristics of Mg-Ni alloy modified by multi-walled carbon nanotubes. International Journal of Hydrogen Energy, 35 (9), 4144-4153.

AMINORROAYA YAMINI, Sima, MITCHELL, D.R.G. and AVDEEV, M. (2016). In situ characterisation of nanostructured multiphase thermoelectric materials at elevated temperatures. Physical Chemistry Chemical Physics, 18 (48), 32814-32819.

AMINORROAYA YAMINI, Sima, MITCHELL, D.R.G., GIBBS, Z.M., SANTOS, R., PATTERSON, V., LI, S., PEI, Y.Z., DOU, S.X. and JEFFREY SNYDER, G. (2015). Heterogeneous Distribution of Sodium for High Thermoelectric Performance of p-type Multiphase Lead-Chalcogenides. Advanced Energy Materials, 5 (21).

AMINORROAYA YAMINI, Sima, MITCHELL, D.R.G., WANG, H., GIBBS, Z.M., PEI, Y., DOU, S.X. and SNYDER, G.J. (2015). Origin of resistivity anomaly in p-type leads chalcogenide multiphase compounds. AIP Advances, 5, 053601.

AMINORROAYA YAMINI, Sima, PATTERSON, Vaughan and SANTOS, Rafael (2017). Band-Gap Nonlinearity in Lead Chalcogenide (PbQ, Q = Te, Se, S) Alloys. ACS Omega, 2 (7), 3417-3423.

AMINORROAYA YAMINI, Sima, RANJBAR, A., CHO, Y.-H., LIU, H.K. and DAHLE, A.K. (2011). Hydrogen storage properties of Mg-10 wt% Ni alloy co-catalysed with niobium and multi-walled carbon nanotubes. International Journal of Hydrogen Energy, 36 (1), 571-579.

AMINORROAYA YAMINI, Sima, REID, M. and DIPPENAAR, R. (2011). Simulation of microsegregation and the solid/liquid interface progression in the concentric solidification technique. Modelling and Simulation in Materials Science and Engineering, 19 (2), 025003.

AMINORROAYA YAMINI, Sima, WANG, H., GIBBS, Z.M., PEI, Y., DOU, S.X. and SNYDER, G.J. (2014). Chemical composition tuning in quaternary p-type Pb-chalcogenides-a promising strategy for enhanced thermoelectric performance. Physical Chemistry Chemical Physics, 16 (5), 1835-1840.

AMINORROAYA YAMINI, Sima, WANG, H., GIBBS, Z.M., PEI, Y., MITCHELL, D.R.G., DOU, S.X. and SNYDER, G.J. (2014). Thermoelectric performance of tellurium-reduced quaternary p-type lead-chalcogenide composites. Acta Materialia, 80, 365-372.

AMINORROAYA YAMINI, Sima, WANG, H., GINTING, D., MITCHELL, D.R.G., DOU, S.X. and SNYDER, G.J. (2014). Thermoelectric performance of n -type (PbTe) 0.75 (PbS) 0.15 (PbSe) 0.1 composites. ACS Applied Materials and Interfaces, 6 (14), 11476-11483.

AMINORROAYA YAMINI, Sima, WILLIAMS, A.Z., ATTARD, D., SHI XUE DOU, G. and JEFFREY SNYDER, G. (2014). Thermoelectric properties and microstructure studies of spinodally decomposed PbTe0.38S0.62 alloy. Science of Advanced Materials, 6 (7), 1453-1459.

AMINORROAYA YAMINI, Sima, ZHANG, C., WANG, X. and NEVIRKOVETS, I. (2012). Crystal structure, electronic structure and thermoelectric properties of n-type BiSbSTe2. Journal of Physics D: Applied Physics, 45 (12), p. 125301.

APOSTOLOPOULOS, Charalambos and PASIALIS, Vasileios (2010). Effects of Corrosion and Ribs on Low Cycle Fatigue Behavior of Reinforcing Steel Bars S400. Journal of Materials Engineering and Performance, 19 (3), 385-394.

APOSTOLOPOULOS, Charalambos and PASIALIS, Vasileios (2008). Use of quality indices in comparison of corroded technical steel bars B500c and S500s on their mechanical performance basis. Construction and Building Materials, 22 (12), 2325-2334.


BINGHAM, Paul, VAISHNAV, Shuchi, FORDER, Sue, SCRIMSHIRE, Alex, JAGANATHAN, Balaasaran, ROHINI, Jiji, MARRA, James, FOX, Kevin, PIERCE, Eric, WORKMAN, Phyllis and VIENNA, John (2017). Modelling the sulfate capacity of simulated radioactive waste borosilicate glasses. Journal of Alloys and Compounds, 695, 656-667.


CASTLETON, Holly Faye, HATHWAY, Elizabeth Abigail, MURPHY, Edward and BECK, Stephen Bernard Marcus (2014). Monitoring performance of a combined water recycling system. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 167 (3), 108-117.

CHIDEMBO, A., ABOUTALEBI, S.H., KONSTANTINOV, K., SALARI, M., WINTON, B., AMINORROAYA YAMINI, Sima, NEVIRKOVETS, I.P. and LIU, H.K. (2012). Globular reduced graphene oxide-metal oxide structures for energy storage applications. Energy and Environmental Science, 5, 5236-5240.

CHO, Y.H., AMINORROAYA YAMINI, Sima, LIU, H.K. and DAHLE, A.K. (2011). The effect of transition metals on hydrogen migration and catalysis in cast Mg-Ni alloys. International Journal of Hydrogen Energy, 36 (8), 4984-4992.

CLEMENS, Oliver, MARCO, Jose F., THOMAS, Michael F., FORDER, Sue, ZHANG, Hongbin, CARTENET, Simon, MONZE, Anais, BINGHAM, Paul A., SLATER, Peter R. and BERRY, Frank J. (2016). Magnetic interactions in cubic-, hexagonal- and trigonal barium iron oxide fluoride, BaFeO2F. Journal of Physics: Condensed Matter, 28 (34).


DAKKA, Sam (2015). Concept design for space habitability for long term missions. Journal of British Interplanetary Society, 68 (11), 363-368.

DAKKA, Sam and AL-MAWALI, Julanda (2016). Numerical investigation for the enhancement of the aerodynamic characteristics of NACA 0012 aerofoil by using a gurney flap. In: Second Internation Conference on Science, Engineering and Environment. Geomate International Society. (In Press)

DAKKA, Sam and PAYTON, Jonathan (2016). Flow control through vortex shedding interaction on one cylinder downstream of another. In: Second Internation Conference on Science, Engineering and Environment. Geomate International Society. (In Press)


EVANGELOU, E. K., WIEMER, C., FANCIULLI, M., SETHU, M. and CRANTON, Wayne (2003). Electrical and structural characteristics of yttrium oxide films deposited by rf-magnetron sputtering on n-Si. Journal of Applied Physics, 94 (1), 318-325.


FERRERES, X.R., AMINORROAYA YAMINI, Sima, NANCARROW, M. and ZHANG, C. (2016). One-step bonding of Ni electrode to n-type PbTe - A step towards fabrication of thermoelectric generators. Materials and Design, 107, 90-97.

FOTIOS, S and CASTLETON, Holly (2015). Lighting for cycling in the UK : a review. Lighting Research and Technology, 1-15. (In Press)

FOTIOS, S., CASTLETON, H., CHEAL, C. and YANG, B. (2015). Investigating the chromatic contribution to recognition of facial expression. Lighting Research and Technology, 1-16. (In Press)

FOTIOS, S., CASTLETON, H. and YANG, B. (2016). Does expression choice affect the analysis of light spectrum and facial emotion recognition? Lighting Research and Technology, 1-9. (In Press)

FOTIOS, Steve and CASTLETON, Holly (2016). Specifying enough light to feel reassured on pedestrian footpaths. Leukos: The Journal of the Illuminating Engineering Society of North America. (In Press)


GOODWIN-JONES, J, NORTCLIFFE, Anne and VERNON-PARRY, Karen (2016). What does good engineering laboratory pedagogy look like? In: Engineering education on top of the world : industry university cooperation : 44 th SEFI Conference Proceedings. SEFI.


JALILI, R., ABOUTALEBI, S.H., ESRAFILZADEH, D., SHEPHERD, R.L., CHEN, J., AMINORROAYA YAMINI, Sima, KONSTANTINOV, K., MINETT, A.I., RAZAL, J.M. and WALLACE, G.G. (2013). Scalable one-step wet-spinning of graphene fibers and yarns from liquid crystalline dispersions of graphene oxide: Towards multifunctional textiles. Advanced Functional Materials, 23 (43), 5345-5354.

JALILI, R., AMINORROAYA YAMINI, Sima, BENEDETTI, T.M., ABOUTALEBI, S.H., CHAO, Y., WALLACE, G.G. and OFFICER, D.L. (2016). Processable 2D materials beyond graphene: MoS2 liquid crystals and fibres. Nanoscale, 8 (38), 16862-16867.

JARAJREH, M, NORTCLIFFE, AL and GREEN, R (2004). Fuzzy logic and equivalent circuit approach to rain measurement. Electronics Letters, 40 (24), p. 1.


LAMPEAS, George and PASIALIS, Vasileios (2014). Computational model validation of structural components by full-field optical measurements. In: 11th World Congress on Computational Mechanics (WCCM), Barcelona, Spain, July 20-25, 2014.

LAMPEAS, George and PASIALIS, Vasileios (2012). On the use of optical methods in the validation of non-linear dynamic simulations of sandwich structures. In: 14th International Congress on Mesomechanics28, 2012, Budapest, Hungary, 25-28 September 2012.

LAMPEAS, George and PASIALIS, Vasileios (2013). A hybrid framework for nonlinear dynamic simulations including full-field optical measurements and image decomposition algorithms. Journal of Strain Analysis for Engineering Design, 48 (1), 5-15.

LAMPEAS, George, PASIALIS, Vasileios, SIEBERT, Thorsten, FELIGIOTTI, Mara and PIPINO, Andrea (2011). Validation of impact simulations of a car bonnet by full-field optical measurements. Applied Mechanics and Materials, 70, 57-62.

LEVI, P, MEISTER, E, VAN ROSSUM, AC, KRAJNIK, T, VONASEK, V, STEPAN, P, LIU, W and CAPARRELLI, Fabio (2014). A cognitive architecture for modular and self-reconfigurable robots. In: Systems Conference (SysCon), 2014 8th Annual IEEE. IEEE, p. 465.


MEDIERO-MUNOYERRO, M J, MCGREGOR, J, MCMILLAN, L, AL-YASSIR, N, BINGHAM, Paul, FORDER, Sue, GORIN, Colin, AL-KHATTAF, S, GLADDEN, L F and MIDGLEY, P A (2016). Structural changes in FeOx/γ-Al2O3 catalysts during ethylbenzene dehydrogenation. Catalysis, Structure and Reactivity, 2 (1), 25-32.

MODARRESIFAR, Farid, BINGHAM, Paul and JUBB, Gary (2016). Thermal conductivity of refractory glass fibres. Journal of Thermal Analysis and Calorimetry. (In Press)


NORTCLIFFE, Anne (2013). Embedding professional experiences and employability into Engineering Sandwich Degrees. In: EE2012: Innovation, Practice and Research in Engineering Education, Coventry, UK.

NORTCLIFFE, Anne (2005). Student-driven module: promoting independent learning. International Journal of Electrical Engineering Education, 42 (3), 247-266.

NORTCLIFFE, Anne and LOVE, Jonathan (1996). In-line approach to pH control of chemical effluent. Measurement and Control, 29 (7), 198-200.

NORTCLIFFE, Anne and MIDDLETON, Andrew (2011). Employability Feedback for Engineering Students. In: International Conference on Engineering Education, Belfast, Northern Ireland, 21-26 August 2011.

NORTCLIFFE, Anne, PINK-KEECH, Cathy and EVANS, Jayne (2014). Closing the BME attainment gap. In: 42nd SEFI Conference, Birmingham, UK, 15-19 September 2014.

NORTCLIFFE, Anne, THOMPSON, M, SHAW, KJ, LOVE, J and FLEMING, PJ (2001). A framework for modelling in S88 constructs for scheduling purposes. ISA transactions, 40 (3), 295-305.


POWER, Sam, NORTCLIFFE, Anne, VERNON-PARRY, Karen and SCHENKEL, Torsten (2016). Engineering learning through aerospace engineering. Other. Athens Institute for Education and Research.


RANJBAR, A., AMINORROAYA YAMINI, Sima, GUO, Z.P., CHO, Y., LIU, H.K. and DAHLE, A. (2011). Comparison of hydrogen storage properties of Mg-Ni from different preparation methods. Materials Chemistry and Physics, 127 (1-2), 405-408.

ROSSITER, Anthony, NORTCLIFFE, Anne, GRIFFIN, Alison and MIDDLETON, Andrew (2009). Using student generated audio to enhance learning. Engineering Education, 4 (2), 52-61.


SALAMA, A, SAATCHI, Reza and BURKE, Derek (2017). Adaptive sampling technique for computer network traffic parameters using a combination of fuzzy system and regression model. In: 2017 4th International Conference on Mathematics and Computers in Science in Industry. MCSI 2017. Island, Greece, August 24-26, 2017. IEEE. (In Press)

SANTOS, Rafael, NANCARROW, Mitchell, DOU, Shi and AMINORROAYA YAMINI, Sima (2017). Thermoelectric performance of n-type Mg2Ge. Scientific Reports, 7, p. 3988.

SCRIMSHIRE, Alex, LOBERA, Alex, KULTYSHEV, Roman, ELLIS, Peter, FORDER, Sue and BINGHAM, Paul (2016). Variable temperature 57Fe-Mössbauer spectroscopy study of nanoparticle iron carbides. Croatica Chemica Acta, 88 (4). (In Press)

SELVAN, Arul, COLE, Laura, SPACKMAN, Lynne and WRIGHT, Chris (2017). Hierarchical Cluster Analysis to Aid Diagnostic Image Data Visualization of MS and Other Medical Imaging Modalities. In: COLE, Laura, (ed.) Imaging Mass Spectrometry Methods and Protocols. Methods in Molecular Biology, 1 . Humana Press, 95-123.

SINGH, Jatinder, BINGHAM, Paul, PENDERS, Jacques and MANBY, David (2016). Effects of residual charge on the performance of electro-adhesive grippers. In: ALBOUL, Lyuba, DAMIAN, Dana and AITKENS, Jonathan M., (eds.) Towards autonomous robotic systems, 17th Annual Conference, TAROS 2016, Sheffield, UK, June 26--July 1, 2016, Proceedings. Lecture Notes in Computer Science. Lecture Notes in Artificial Intelligence (9716). Springer International Publishing, 327-338.


TALEBI, Tahereh, GHOMASHCHI, Reza, TALEMI, Pejman and AMINORROAYA YAMINI, Sima (2017). Electrophoretic Deposition of p-Type Bi2Te3 for Thermoelectric Applications. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 11 (4).

THORPE, Abbey, BOYES, Victoria, SAMMON, Chris and LE MAITRE, Christine (2016). Thermally triggered injectable hydrogel, which induces mesenchymal stem cell differentiation to nucleus pulposus cells: Potential for regeneration of the intervertebral disc. Acta Biomaterialia, 36, 99-111.

TITTAGALA, Rohan, HADIDIMOUD, Saeid and LIANG, Bo (2016). Addressing the UK-SPEC competence levels : challenges in programme design and delivery in a diversifying engineering HE sector. In: KAPRANOS, Platon, (ed.) International Symposium on Engineering Education - Interdisciplinary Engineering - Breaking Boundaries. ISEE 2016 Conference Proceedings. ISEE, 262-270.

TRANCOSSI, Michele (2015). Yes We ACHEON! In: EU Aerodays, London, 20-22 October 2015. ASME. (Unpublished)

TRANCOSSI, Michele, MOHAMMEDALAMIN, Omer, PASCOA, Jose and RODRIGUES, Frederico (2016). Thermodynamic analysis and preliminary design of the cooling system of a pulsejet for aeronautic propulsion. International Journal of Heat and Technology, 34 (2), S528-S534.

TRANCOSSI, Michele, PASCOA, Jose and CARLOS, Xisto (2016). Temperature oscillations in the wall of a cooled multi pulsejet propeller for aeronautic propulsion. SAE Technical Papers, 2016 (1-1998), 1-8.

TRANCOSSI, Michele, PASCOA, Jose and XISTO, Carlos (2016). Design of an innovative off road hybrid vehicle by energy efficiency criteria. International Journal of Heat and Technology, 34 (2), S387-S395.

TRANCOSSI, Michele and PASCOA, Jose C. (2016). Optimized modular design for energy efficiency: The case of an innovative electric hybrid vehicle design. In: Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition, IMECE2016. Transportation Systems. The American Society of Mechanical Engineers, V012T16A023.

TRANCOSSI, Michele, STEWART, Jill, DUMAS, Antonio, MADONIA, Mauro and PASCOA, Jose Carlos (2016). Constructal Design of an Entropic Wall With Circulating Water Inside. Journal Of Heat Transfer, 138 (8), 082801-082810.

TRANCOSSI, Michele, STEWART, Jill, MAHARSHI, Subhash and ANGELI, Diego (2016). Mathematical model of a constructal Coanda effect nozzle. Journal of Applied Fluid Mechanics, 9 (6), 2813-2822.


WRIGHT, Adrian C, SINCLAIR, Roger N, SHAW, Joanna L, HAWORTH, Richard, BINGHAM, Paul, FORDER, Sue, HOLLAND, Diane, SCALES, Charlie R, CUELLO, Gabriel J and VEDISHCHEVA, Natalia M (2017). The Environment of Fe3+/Fe2+ Cations in a Sodium Borosilicate Glass. Physics and Chemistry of Glasses : European Journal of Glass Science and Technology Part B, 58 (3), 78-91.


YAMBISSA, Mubuabua, FORDER, Sue and BINGHAM, Paul (2016). 57Fe Mossbauer spectroscopy used to develop understanding of a diamond preservation index model. Hyperfine Interactions, 237 (66), 1-6.

YU, Z., WANG, X., DU, Y., AMINORROAYA YAMINI, Sima, ZHANG, C., CHUANG, K. and LI, S. (2013). Fabrication and characterization of textured Bi2Te3 thermoelectric thin films prepared on glass substrates at room temperature using pulsed laser deposition. Journal of Crystal Growth, 362 (1), 247-251.

This list was generated on Tue Sep 19 11:48:42 2017 UTC.