Items where Research Institute, Centre or Group is "Materials Analysis and Research Services"

ABBASI, Erfan, LUO, Quanshun and OWENS, Dave (2018). Case Study: Wear Mechanisms of NiCrVMo-steel and CrB-steel Scrap Shear Blades. Wear, 398-39, 29-40.

ABBASI, Erfan, LUO, Quanshun and OWENS, Dave (2018). A comparison of microstructure and mechanical properties of low-alloy-medium-carbon steels after quench-hardening. Materials Science and Engineering: A, 725, 65-75.

LUO, Quanshun (2018). Characterization of short-range ordered domains using quantitative X-ray diffraction. Nanoscience and Nanotechnology Letters, 10 (5-6), 835-842.

LUO, Quanshun (2018). Electron Microscopy and Spectroscopy in the Analysis of Friction and Wear Mechanisms. Lubricants, 6 (58), 1-19.

LUO, Quanshun, ABBASI, Erfan and OWENS, Dave (2018). Microstructural Characteristics and Mechanical Properties of Low-Alloy, Medium-Carbon Steels After Multiple Tempering. Acta Metallurgica Sinica, 32 (1), 74-88.

LUO, Quanshun, KITCHEN, Matthew and ABUBAKRI, Shahriar (2017). Effect of austempering time on the microstructure and carbon partitioning of ultrahigh strength steel 56NiCrMoV7. Metals, 7 (7), p. 258.

LUO, Quanshun and YANG, Shicai (2017). Uncertainty of the X-ray Diffraction (XRD) sin2 ψ Technique in Measuring Residual Stresses of Physical Vapor Deposition (PVD) Hard Coatings. Coatings, 7 (8), 128-18.

ZHENG, Hun, ZHOU, Hui, GUI, Binhua, LUO, Quanshun, LI, Haixu and WANG, Qimin (2017). Influence of power pulse parameters on the microstructure and properties of the AlCrN coatings by a modulated pulsed power magnetron sputtering. Coatings, 7 (12), p. 216.

BAXTER, J. Erik (2016). Existence of topological hairy dyons and dyonic black holes in anti-de Sitter SU(N) Einstein-Yang-Mills theory. Journal of Mathematical Physics, 57 (2), 022505.

BAXTER, J. Erik and WINSTANLEY, E (2016). On the stability of soliton and hairy black hole solutions of SU(N) Einstein-Yang-Mills theory with a negative cosmological constant. Journal of Mathematical Physics, 57 (2), 022506.

BAXTER, J. Erik and WINSTANLEY, Elizabeth (2016). Topological black holes in su(N) Einstein-Yang-Mills theory with a negative cosmological constant. Physics Letters B, 753, 268-273.

ERIK, Baxter (2016). On the global existence of hairy black holes and solitons in anti-de Sitter Einstein-Yang-Mills theories with compact semisimple gauge groups. General Relativity and Gravitation, 48, p. 133.

LUO, Quanshun (2016). A new XRD method to quantify plate and lath martensites of hardened medium-carbon steel. Journal of Materials Engineering and Performance, 25 (6), 2170-2179.

LUO, Quanshun, OLUWAFEMI, Oluwaseun, KITCHEN, Matthew and YANG, Shicai (2016). Tribological properties and wear mechanisms of DC pulse plasma nitrided austenitic stainless steel in dry reciprocating sliding tests. Wear, 376.

POWER, Sam, NORTCLIFFE, Anne, VERNON-PARRY, Karen and SCHENKEL, Torsten (2016). Engineering learning through aerospace engineering. Other. Athens Institute for Education and Research.

ROURKE, K., EBRAHIM, M., LUO, Quanshun and WILSON, E A (2016). Hump on upper shelf of ductile-brittle transition temperature curve of a plain carbon steel. Materials Science and Technology, 27 (3), 693-695.

YANG, Shicai, KITCHEN, Matthew, LUO, Quanshun, IEVLEV, Daniel N and COOKE, Kevin (2016). Effect of nitriding time on the structural evolution and properties of austenitic stainless steel nitrided using high power pulsed DC glow discharge Ar/N2 plasma. Journal of Coatings Science and Technology, 3 (2), 62-72.

YANG, Shicai, LUO, Quanshun, SUN, Hailing, KITCHEN, Matthew and COOKE, Kevin (2016). Physical and tribological properties of Nitrided AISI 316 stainless steel balls. MATEC Web of Conferences, 77, 01037.

CHEN, Yao-Chen, REEVES-MCLAREN, Nik, TAN, Chaou C., BINGHAM, Paul, FORDER, Sue and WEST, Anthony R. (2015). Synthesis and characterisation of Li11RE18M4O39−δ: RE = Nd or Sm; M = Al, Co or Fe. Dalton Transactions, 45 (1), 315-323.

FARAJI, Masoumeh, WILCOX, David P.., THACKRAY, Richard, HOWE, Andrew A., TODD, Iain and TSAKIROPOULOS, Panos (2015). Quantitative characterization of inclusions in continuously cast high-carbon steel. Metallurgical and Materials Transactions B, 46 (6), 2490-2502.

LAMPEAS, George, PASIALIS, Vasileios, LIN, Xiaoshan and PATTERSON, Eann (2015). On the validation of solid mechanics models using optical measurements and data decomposition. Simulation Modelling Practice and Theory, 52, 92-107.

LUO, Quanshun, KITCHEN, Matthew, PATEL, Vinay, FILLEU, Martin and OWENS, Dave (2015). Partial-Isothermally-Treated Low Alloy Ultrahigh Strength Steel With Martensitic/Bainitic Microstructure. In: HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015. Hoboken, NJ, John Wiley & Sons, 433-438.

LUO, Quanshun and YANG, Shicai (2015). From micro to nano scales -recent progress in the characterization of nitrided austenitic stainless steels. International Journal of Nanomedicine and Nanosurgery, 1 (1), 1-11.

PASIALIS, Vasileios and LAMPEAS, George (2015). Shape descriptors and mapping methods for full-field comparison of experimental to simulation data. Applied Mathematics and Computation, 256, 203-221.

SUN, Hualei, WOODRUFF, Daniel N., CASSIDY, Simon J., ALLCROFT, Genevieve M., SEDLMAIER, Stefan J., THOMPSON, Amber L., BINGHAM, Paul, FORDER, Sue, CARTENET, Simon, MARY, Nicolas, RAMOS, Silvia, FORONDA, Francesca R., WILLIAMS, Benjamin H., LI, Xiaodong, BLUNDELL, Stephen J. and CLARKE, Simon J. (2015). Soft chemical control of superconductivity in Lithium Iron Selenide Hydroxides Li1–xFex(OH)Fe1–ySe. Inorganic Chemistry, 54 (4), 1958-1964.

BAXTER, Erik (2014). On the existence of topological hairy black holes in SU(N) EYM theory with a negative cosmological constant. General Relativity and Gravitation, 47 (1), p. 1829.

FARAJI, Masoumeh and KHALILPOUR, Hamid (2014). Effect of phosphorous inoculation on creep behavior of a hypereutectic Al-Si alloy. Journal of Materials Engineering and Performance, 23 (10), 3467-3473.

FARAJI, Masoumeh, WILCOX, DP, THACKRAY, RP, TODD, I, HOWE, AA and TSAKIROPOULOS, A (2014). Effect of early stages of thermomechanical processing on inclusions in high carbon steel. Materials Science and Technology, 30 (10), 1177-1188.

GOEL, Mukesh, DAS, Ashutosh, RAVIKUMAR, K. and ASTHANA, Abhishek (2014). A study on the enhancement of sonochemical degradation of eosin B using other advanced oxidation processes. Desalination and Water Treatment, 52 (34-36), 6770-6776.

LUO, Quanshun (2013). Tribofilms in solid lubricants. In: WANG, Q. Jane and CHUNG, Yip-Wah, (eds.) Encyclopedia of Tribology. Springer.

LUO, Quanshun, YANG, S. and COOKE, K.E. (2013). Hybrid HIPIMS and DC magnetron sputtering deposition of TiN coatings: Deposition rate, structure and tribological properties. Surface and Coatings Technology, 236, 13-21.

ANSARI, Imtiyaz, WATKINS, K.G., SHARP, M. C., HUTCHINSON, R. A., POTTS, R. M. and CLOWES, J. (2012). Modification of anodised aluminium surfaces using a picosecond fibre laser for printing applications. Journal of Nanoscience and Nanotechnology, 12 (6), 4946-4950.

LUO, Quanshun, CHI, Kuangnan, LI, Shuxin and BARNARD, Pete (2012). Microstructural stability and lattice misfit characterization of nimonic 263. In: Proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference. Volume 6, Materials and fabrication, Parts A and B. ASME, 281-290.

LUO, Quanshun, KITCHEN, Matthew, PATEL, Vinay and MAGOWAN, Stephen (2012). Carbon partitioning and structure evolution in the hardening treatments of high strength steel. In: 20th Congress of International Federation for Heat Treatment and Surface Engineering, Beijing, China, 23-25 October 2012. (Unpublished)

LUO, Quanshun, YANG, S., COOKE, K.E. and MAGOWAN, Stephen (2012). Structure and tribological properties of TiN coatings grown by hybrid JIPIMS and CFUBMS deposition. In: 20th Congress of International Federation for Heat Treatment and Surface Engineering, Beijing, China, 23-25 October 2012.

ANSARI, I. A., WATKINS, K. G., SHARP, M. C., HUTCHINSON, R. A. and POTTS, R. M. (2011). Surface modification of anodised aluminium using a femtosecond laser. Journal of Nanoscience and Nanotechnology, 11 (6), 5358-5364.

ANSARI, Imtiyaz, PILLAY-NARRAINEN, A., THOMPSON, R. L., HUTCHINGS, L. R. and CLARKE, N. (2011). Dendritically functionalised polymers as surface modifying additives. In: International Meeting on Developments in Materials, Processes and Applications of Emerging Technologies(MPA), Alvor, Portugal, 27-29 June 2011. (Submitted)

LUO, Quanshun (2011). Temperature dependent friction and wear of magnetron sputtered coating TiAlN/VN. Wear, 271 (9-10), 2058-2066.

LUO, Quanshun, WANG, Shun Cai, ZHOU, Zhaoxia and CHEN, Linghao (2011). Structure characterization and tribological study of magnetron sputtered nanocomposite nc-TiAlV(N, C)/a-C coatings. Journal of Materials Chemistry, 21, 9746-9756.

LUO, Q. (2010). Origin of friction in running-in sliding wear of nitride coatings. Tribology Letters, 37, 529-539.

LUO, Q. and JONES, A. H. (2010). High-precision determination of residual stress of polycrystalline coatings using optimised XRD-sin2ψ technique. Surface & Coatings Technology, 205, 1403-1408.

ZHOU, Z., RAINFORTH, W. M., LUO, Q., HOVSEPIAN, Papken, OJEDA, J. J. and ROMERO-GONZALEZ, M. E. (2010). Wear and friction of TiAlN/VN coatings against Al2O3 in air at room and elevated temperatures. Acta Materialia, 58, 2912-2925.

ZHOU, Z., RAINFORTH, W. M., LUO, Q., HOVSEPIAN, Papken, OJEDA, J. J. and ROMERO-GONZALEZ, M. E. (2010). Wear and friction of TiAlN/VN coatings against Al2O3 in air at room and elevated temperatures. Acta Materialia, 58, 2912-2925.

ANSARI, Imtiyaz Ahmed, WATKINS, Kennith G., SHARP, Martin C., HUTCHINSON, Richard and POTTS, Rodney (2009). Modification of Aluminium Surface Using Picosecond Laser for Printing Applications. MRS Proceedings, 1230.

LUO, Q., ZHOU, Z., RAINFORTH, W. M. and BOLTON, M. (2009). Effect of tribofilm formation on the dry sliding friction and wear properties of magnetron sputtered TiAlCrYN coatings. Tribology Letters, 34, 113-124.

ANSARI, Imtiyaz, HUTCHINGS, Lian R, NARRIANEN, Amilcar Pillay, THOMPSON, Richard L and CLARKE, Nigel (2008). Modifying and managing the surface properties of polymers. Polymer International, 57 (2), 163-170.

BAXTER, Erik, HELBLING, Marc and WINSTANLEY, Elizabeth (2008). Abundant Stable Gauge Field Hair for Black Holes in Anti–de Sitter Space. Physical Review Letters, 100 (1).

BAXTER, Erik and WINSTANLEY, Elizabeth (2008). On the existence of soliton and hairy black hole solutions of SU(N) Einstein–Yang–Mills theory with a negative cosmological constant. Classical and Quantum Gravity, 25 (24), p. 245014.

MCKIBBIN, S. P., AMAVASAI, B., SELVAN, A. N., CAPARRELLI, F. and OTHMAN, W. (2008). The role of sensory-motor coordination: identifying environmental motion dynamics with dynamic neural networks. In: ICINCO 2008, Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics, Robotics and Automation 2, Funchal, Madeira, Portugal, May 11-15, 2008.

ANSARI, Imtiyaz A., CLARKE, Nigel, HUTCHINGS, Lian R., PILLAY-NARRAINEN, Amilcar, TERRY, Ann E., THOMPSON, Richard L. and WEBSTER, John R. P. (2007). Aggregation, adsorption, and surface properties of multiply end-functionalized polystyrenes. Langmuir, 23 (8), 4405-4413.

BAXTER, Erik, HELBLING, Marc and WINSTANLEY, Elizabeth (2007). Soliton and black hole solutions of SU(N) Einstein-Yang-Mills theory in anti-de Sitter space. Physical Review D, 76 (10).

BOISSENIN, M., WEDEKIND, J., SELVAN, A. N., AMAVASAI, B. P., CAPARRELLI, F. and TRAVIS, J. R. (2007). Computer vision methods for optical microscopes. Image and Vision Computing, 25 (7), 1107-1116.

LUO, Q., SCHIMPF, C., EHIASARIAN, A. P., CHEN, L. and HOVSEPIAN, P. (2007). Structure and wear mechanisms of nano-structured TiAlCN/VCN multilayer coatings. Plasma Process and Polymers, 4 (51), S916-S920.

MCKIBBIN, S., AMAVASAI, B., SELVAN, A., CAPARRELLI, Fabio and OTHMAN, W. (2007). Recurrent neural robot controllers: feedback mechanisms for identifying environmental motion dynamics. Artificial intelligence review, 27 (2-3), 113-130.

NARRAINEN, Amilcar Pillay, HUTCHINGS, Lian R., ANSARI, Imtiyaz A., THOMPSON, Richard L. and CLARKE, Nigel (2007). Multi-end-functionalized polymers: additives to modify polymer properties at surfaces and interfaces. Macromolecules, 40 (6), 1969-1980.

OTHMAN, Wafw, AMAVASAI, B. P., MCKIBBIN, S. P. and CAPARRELLI, Fabio (2007). An analysis of collective movement models for robotic swarms. In: International Conference on Computer as a Tool (EUROCON 2007), Warsaw, Poland, September 9-12, 2007.

SAVISALO, T., LEWIS, D. B., LUO, Q., BOLTON, M. and HOVSEPIAN, P. E. (2007). Structure of duplex CrN/NbN coatings and their performance against corrosion and wear. Surface and Coatings Technology, 202 (9), 1661-1667.

THOMPSON, Richard L., NARRAINEN, Amilcar Pillay, EGGLESTON, Stuart M., ANSARI, Imtiyaz A., HUTCHINGS, Lian R. and CLARKE, Nigel (2007). Recoverable surface modification using dendritically fluorocarbon-functionalized poly(methyl methacrylate). Journal of applied polymer science, 105 (2), 623-628.

LUO, Q. and HOVSEPIAN, P. E. (2006). Transmission electron microscopy and energy dispersive X-ray spectroscopy on the worn surface of nano-structured TiAlN/VN multilayer coating. Thin Solid Films, 497 (1-2), 203-209.

LUO, Q., ZHOU, Z., RAINFORTH, W. M. and HOVSEPIAN, P. E. (2006). TEM-EELS study of low-friction superlattice TiAlN/VN coating: the wear mechanisms. Tribology Letters, 24 (2), 171-178.

NARRAINEN, A. Pillay, HUTCHINGS, L. R., FEAST, W. J., THOMPSON, R. L., ANSARI, I. A. and CLARKE, N. (2006). Fluorocarbon End-functionalized Polymers from Poly(arylether) Dendritic Initiators. Macromolecular Symposia, 231 (1), 103-109.

PILLAY NARRAINEN, Amilcar, HUTCHINGS, Lian R., ANSARI, Imtiyaz A., CLARKE, Nigel and THOMPSON, Richard L. (2006). Novel multi end-functionalised polymers. Additives to modify polymer properties at surfaces and interfaces. Soft Matter, 2 (2), 126-128.

AMAVASAI, B. P., CAPARRELLI, Fabio, SELVAN, A,, BOISSENIN, M., TRAVIS, J. R. and MEIKLE, S. (2005). Machine vision methods for autonomous micro-robotic systems. Kybernetes, 34 (9-10), 1421-1439.

HAMLEY, I. W., ANSARI, I. A., CASTELLETTO, V., NUHN, H., RÖSLER, A. and KLOK, H.-A. (2005). Solution Self-Assembly of Hybrid Block Copolymers Containing Poly(ethylene glycol) and Amphiphilic β-Strand Peptide Sequences. Biomacromolecules, 6 (3), 1310-1315.

HOVSEPIAN, P. E., LEWIS, D. B., LUO, Q. and FARINOTTI, A. (2005). Corrosion resistance of CrN/NbN superlattice coatings grown by various physical vapour deposition techniques. Thin Solid Films, 488 (1-2), 1-8.

HOVSEPIAN, Papken, LEWIS, D. B., LUO, Q. and MUNZ, W. D. (2005). TiAIN based nanoscale multilayer coatings designed to adapt their tribological properties at elevated temperatures. Thin solid films, 1-2.

HOVSEPIAN, Papken, LUO, Quanshun, ROBINSON, Gary, PITTMAN, Manfred, HOWARTH, Martin, DOERWALD, D., TIETEMA, R., SIM, W. M., DEEMING, A. and ZEUS, T. (2005). TiAIN superlattice structured PVD coatings: a new alternative in the machining of aluminium alloys for aerospace and automotive components. Surface and coatings technology, 201 (1-2), 265-272.

INMAN, I. A., DATTA, P. K., DU, H. L., BURNELL-GRAY, J. S., PIERZGALSKI, S. and LUO, Q. (2005). Studies of high temperature sliding wear of metallic dissimilar interfaces. Tribology International, 38 (9), 812-823.

LUO, Q., ROBINSON, G., PITTMAN, M., HOWARTH, M., SIM, W. M., STALLEY, M. R., LEITNER, H., EBNER, R., CALISKANOGLU, D. and HOVSEPIAN, P. E. (2005). Performance of nano-structured multilayer PVD coating TiAN/VN in dry high speed milling of aerospace aluminium 7010-T7651. Surface and Coatings Technology, 200 (1-4), 123-127.

LUO, Quanshun, ROBINSON, Gary, PITTMAN, Manfred, HOWARTH, Martin, SIM, W.M., STALLEY, M.R., LEITNER, H., EBNER, R., CALISKANOGLU, D. and HOVSEPIAN, Papken (2005). Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651. Surface and Coatings Technology, 200, 123-127.

MEIKLE, S., AMAVASAI, B. P. and CAPARRELLI, Fabio (2005). Towards real-time object recognition using pairs of lines. Real-Time Imaging, 11 (1), 31-43.

FIELDEN, Iain (2004). Results from in-situ, real-time SEM observations of grain growth in polycrystalline metal. Recrystallization and Grain Growth, Pts 1 and 2, 467-47, 875-880.

FIELDEN, Iain, CAWLEY, J. and RODENBURG, J. M. (2004). Backscattered SEM imaging of high-temperature samples for grain growth studies in metals. Electron microscopy and analysis (179), 181-184.

KOK, Y. N., HOVSEPIAN, P. E., LUO, Q., LEWIS, D. B., WEN, J. G. and PETROV, I. (2004). Influence of the bias voltage on the structure and the tribological performance of nanoscale multilayer C/Cr PVD coatings. Thin Solid Films, 475 (1-2), 219-226.

LEWIS, D.B., LUO, Q., HOVSEPIAN, P. E. and MUNZ, W.D. (2004). Interrelationship between atomic species, bias voltage, texture and microstructure of nano-scale multilayers. Surface and Coatings Technology, 184 (2-3), 225-232.

LUO, Q., HOVSEPIAN, P. E., LEWIS, D. B., MUNZ, W. D., KOK, Y. N., COCKREM, J., BOLTON, M. and FARINOTTI, A. (2004). Tribological properties of unbalanced magnetron sputtered nano-scale multilayer coatings TiAlN/VN and TiAlCrYN deposited on plasma nitrided steels. Surface and coatings technology, 193 (1-3), 39-45.

LUO, Q., LEWIS, D. B., HOVSEPIAN, P. E. and MUNZ, W. D. (2004). Transmission electron microscopy and x-ray diffraction investigation of the microstructure of nanoscale multilayer TiAlN/VN grown by unbalanced magnetron deposition. Journal of Materials Research, 19 (4), 1093-1104.

ANSARI, I. A., CASTELLETTO, V., MYKHAYLYK, T., HAMLEY, I. W., LU, Z. B., ITOH, T. and IMRIE, C. T. (2003). Hierarchical Order in a Side-Group Liquid Crystalline Block Copolymer. Macromolecules, 36 (23), 8898-8901.

ANSARI, Imtiyaz and HAMLEY, Ian W. (2003). Templating the patterning of gold nanoparticles using a stained triblock copolymer film surface. Journal of Materials Chemistry, 13 (10), 2412-2413.

CASTELLETTO, V., ANSARI, I. A. and HAMLEY, I. W. (2003). Influence of added clay particles on the structure and rheology of a hexagonal phase formed by an amphiphilic block copolymer in aqueous solution. Macromolecules, 36 (5), 1694-1700.

HOVSEPIAN, P. E., LEWIS, D. B., CONSTABLE, C., LUO, Q., KOK, Y. N. and MUNZ, W. D. (2003). Combined steered cathodic arc/unbalanced magnetron grown C/Cr nanoscale multilayer coatings for tribological applications. Surface and Coatings Technology, 174, 762-769.

INMAN, I. A., DATTA, S., DU, H. L., BURNELL-GARY, J. S. and LUO, Q (2003). Microscopy of glazed layers formed during high temperature sliding wear at 750C. Wear, 254 (5-6), 461-467.

LEWIS, D. B., CREASEY, S. J., ZHOU, Z., FORSYTH, J. J., EHIASARIAN, A. P., HOVSEPIAN, P. E., LUO, Q., RAINFORTH, W. M. and MUNZ, W. D. (2003). The effect of (Ti + Al): V ratio on the structure and oxidation behaviour of TiAlN/VN nano-scale multilayer coatings. Surface and coatings technology, 177, 252-259.

CONSTABLE, C. P., YARWOOD, J., ROBINSON, G., LUO, Q., LEWIS, D. B. and MUNZ, W. D. (2002). Investigation of wear processes on worn tools using Raman microscopy. Surface Engineering, 18 (2), 127-132.

LEYENS, C., PETERS, M., HOVSEPIAN, P. E., LEWIS, D. B., LUO, Q. and MUNZ, W. D. (2002). Novel coating systems produced by the combined cathodic arc/unbalanced magnetron sputtering for environmental protection of titanium alloys. Surface and Coatings Technology, 155 (2-3), 103-111.

RAINFORTH, W. M., LEONARD, A. J., PERRIN, C., BEDOLLA-JACUINDE, A., WANG, Y., JONES, H. and LUO, Quanshun (2002). High resolution observations of friction-induced oxide and its interaction with the worn surface. Tribology International, 35 (11), 731-748.

LUO, Q., LEYENS, C., HOVSEPIAN, P. E., LEWIS, D. B., CONSTABLE, C. P. and MUNZ, W. D. (2001). Oxidation mechanism of PVD TiAlCrYN coating observed by analytical TEM. In: AINDOW, M. and KIELY, C. J., (eds.) Electron Microscopy and Analysis 2001. Institute of Physics Conference Series (168). Institute of Physics, 369-372.

LUO, Quanshun, RAINFORTH, W. Mark and MÜNZ, W. Dieter (2001). TEM studies of the wear of TiAlN/CrN superlattice coatings. Scripta Materialia, 45 (4), 399-404.