Items where Author is "Cranton, Wayne"

KADEM, Burak, CRANTON, Wayne and HASSAN, Aseel (2015). Metal salt modified PEDOT : PSS as anode buffer layer and its effect on power conversion efficiency of organic solar cells. Organic Electronics, 24, 73-79. [Article]

HILLIER, James Arthur, PATSALAS, Panos, KARFARDIS, Dimitrios, CRANTON, Wayne, NABOK, Alexi V, MELLOR, Christopher J, KOUTSOGEORGIS, Demosthenes C and KALFAGIANNIS, Nikolaos (2022). Reactive laser annealing of indium tin oxide: implications to crystal structure, defect composition, and plasma energy. Optical Materials Express, 12 (11), p. 4310. [Article]

HILLIER, James Arthur, PATSALAS, Panos, KARFARIDIS, Dimitrios, CAMELIO, Sophie, CRANTON, Wayne, NABOK, Alexei V., MELLOR, Christopher J., KOUTSOGEORGIS, Demosthenes C. and KALFAGIANNIS, Nikolaos (2022). Photo-engineered optoelectronic properties of indium tin oxide via reactive laser annealing. Scientific Reports, 12 (1): 14986. [Article]

HILLIER, James A., CAMELIO, Sophie, CRANTON, Wayne, NABOK, Alexei V., MELLOR, Christopher J., KOUTSOGEORGIS, Demosthenes C. and KALFAGIANNIS, Nikolaos (2020). When ellipsometry works best: a case study with transparent conductive oxides. ACS Photonics, 7 (10), 2692-2702. [Article]

ALAM, A.E., CRANTON, Wayne and DHARMADASA, I. (2019). Electrodeposition of CdS thin-films from cadmium acetate and ammonium thiosulphate precursors. Journal of Materials Science: Materials in Electronics. [Article]

HASSAN, Aseel, KADEM, Burak and CRANTON, Wayne (2017). Organic solar cells: study of combined effects of active layer nanostructure and electron and hole transport layers. Thin Solid Films, 636, 760-764. [Article]

OJO, A.A., CRANTON, Wayne and DHARMADASA, I (2019). Next generation multilayer graded bandgap solar cells. Cham, Springer. [Authored Book]

KADEM, Burak, HASSAN, Aseel and CRANTON, Wayne (2016). Efficient P3HT:PCBM bulk heterojunction organic solar cells; effect of post deposition thermal treatment. Journal of Materials Science: Materials in Electronics, 27 (7), 7038-7048. [Article]

SANO, Naoko, BARLOW, Anders J., TSAKONAS, Costas, CRANTON, Wayne and CUMPSON, Peter J. (2016). Optimal conditions for gas cluster ion beams in studying inorganic interface species: improved chemical information at a ZnO interface. Surface and Interface Analysis, 48 (7), 575-579. [Article]

KADEM, Burak Y., HASSAN, Aseel and CRANTON, Wayne (2015). Enhancement of power conversion efficiency of P3HT : PCBM solar cell using solution processed Alq3 film as electron transport layer. Journal of Materials Science: Materials in Electronics, 26 (6), 3976-3983. [Article]

WANG, Mingqing, HOU, Xianghui, LIU, Junpeng, CHOY, KwangLeong, GIBSON, Paul, SALEM, Elhamali, KOUTSOGEORGIS, Demosthenes and CRANTON, Wayne (2015). An alternative non-vacuum and low cost ESAVD method for the deposition of Cu(In,Ga)Se2 absorber layers. Physica Status Solidi (A) Applications and Materials Science, 212 (1), 72-75. [Article]

SIOZIOS, A., ZOUBOS, H., PLIATSIKAS, N., KOUTSOGEORGIS, D. C., VOURLIAS, G., PAVLIDOU, E., CRANTON, Wayne and PATSALAS, P. (2014). Growth and annealing strategies to control the microstructure of AlN:Ag nanocomposite films for plasmonic applications. Surface and coatings technology, 255, 28-36. [Article]

TSAKONAS, Costas, CRANTON, Wayne, LI, Flora, ABUSABEE, Khairi, FLEWITT, Andrew, KOUTSOGEORGIS, Demosthenes and RANSON, Robert (2013). Intrinsic photoluminescence from low temperature deposited zinc oxide thin films as a function of laser and thermal annealing. Journal of Physics D: Applied Physics, 46 (9), 095305. [Article]

SIOZIOS, A., KOUTSOGEORGIS, D. C., LIDORIKIS, E., DIMITRAKOPULOS, G. P., KEHAGIAS, T., ZOUBOS, H., KOMNINOU, P., CRANTON, Wayne, KOSMIDIS, C. and PATSALAS, P. (2012). Optical encoding by plasmon-based patterning: hard and inorganic materials become photosensitive. Nano Letters, 12 (1), 259-263. [Article]

WAKEHAM, S., THWAITES, M., TSAKONAS, C., CRANTON, Wayne, RANSON, R., BOUTAUD, G. and KOUTSOGEORGIS, D. (2010). A new reactive sputtering technique for the low temperature deposition of transparent light emitting ZnS:Mn thin films. Physica Status Solidi (A) Applications and Materials Science, 207 (7), 1614-1618. [Article]

WAKEHAM, S. J., THWAITES, M. J., HOLTON, B. W., TSAKONAS, C., CRANTON, Wayne, KOUTSOGEORGIS, D. C. and RANSON, R. (2009). Low temperature remote plasma sputtering of indium tin oxide for flexible display applications. Thin Solid Films, 518 (4), 1355-1358. [Article]

KOUTSOGEORGIS, D. C., CRANTON, Wayne, RANSON, R. M. and THOMAS, C. B. (2009). Performance enhancement of ZnS:Mn thin film electroluminescent devices by combination of laser and thermal annealing. Journal of Alloys and Compounds, 483 (1-2), 526-529. [Article]

YAP, S. V., RANSON, R. M., CRANTON, Wayne and KOUTSOGEORGIS, D. (2008). Decay time characteristics of la2O2S: Eu and la 2O2S: Tb for use within an optical sensor for human skin temperature measurement. Applied Optics, 47 (27), 4895-4899. [Article]

WILSON, S. L., CRANTON, Wayne, RANSON, R., KOUTSOGEORGIS, D. C., MOSLEY, A., THOMAS, C. B., BOUTAUD, G., WAGLAND, S., MASTIO, E. A., LIPIEC, S., SPILLER, A., SCOTT, J. and STOUTE, S. (2005). Optimization of the electrical and optical properties of ink-jet-printed SnO(2):Sb using thermal annealing and excimer-laser processing. Digest of Technical Papers - SID International Symposium, 36 (1), 530-533. [Article]

EVANGELOU, E. K., WIEMER, C., FANCIULLI, M., SETHU, M. and CRANTON, Wayne (2003). Electrical and structural characteristics of yttrium oxide films deposited by rf-magnetron sputtering on n-Si. Journal of Applied Physics, 94 (1), 318-325. [Article]

LIEW, S. C., KOUTSOGEORGIS, D. C., CRANTON, Wayne and THOMAS, C. B. (2002). Pulsed KrF laser annealing of blue emitting SrS:Cu,Ag thin films. Electronics Letters, 38 (23), 1466-1468. [Article]

BARROS, S. O., STEVENS, R. and CRANTON, Wayne (2001). Enhancement of the laterally emitting thin film electroluminescent device optical outcoupling via the fabrication of novel geometry structures. Optical Engineering, 40 (6), 934-940. [Article]

RÜDIGER, J., MIAS, C., STEVENS, R. and CRANTON, Wayne (2001). Fast modelling of the optical characteristics of electroluminescent pixel structures. IEE Proceedings: Optoelectronics, 148 (2), 101-105. [Article]

BARROS, S. O., STEVENS, R., THOMAS, C. B., CRANTON, Wayne and CRAVEN, M. (2001). Ion milling properties of laterally emitting thin-film electroluminescent materials. IEEE Transactions on Semiconductor Manufacturing, 14 (2), 173-176. [Article]

MASTIO, E. A., CRANTON, Wayne and THOMAS, C. B. (2001). Lattice misfit versus performance of thin film electroluminescent structures. Journal of Applied Physics, 89 (3), 1605-1611. [Article]

TSAKONAS, C., LIEW, S. C., MIAS, C., KOUTSOGEORGIS, D. C., RANSON, R. M., CRANTON, Wayne and DUDHIA, M. (2001). Optically transparent frequency selective window for microwave applications. Electronics Letters, 37 (24), 1464-1465. [Article]

KOUTSOGEORGIS, D. C., MASTIO, E. A., CRANTON, Wayne and THOMAS, C. B. (2001). Pulsed KrF laser annealing of ZnS:Mn laterally emitting thin film electroluminescent displays. Thin Solid Films, 383 (1-2), 31-33. [Article]

MASTIO, E. A., FOGARASSY, E., CRANTON, Wayne and THOMAS, C. B. (2000). Ablation study on pulsed KrF laser annealed electroluminescent ZnS:Mn/Y2O3 multilayers deposited on Si. Applied Surface Science, 154, 35-39. [Article]

MASTIO, E. A., THOMAS, C. B., CRANTON, Wayne and FOGARASSY, E. (2000). Effects of multiple KrF laser irradiations on the electroluminescence and photoluminescence of rf-sputtered ZnS:Mn-based electroluminescent thin film devices. Applied Surface Science, 157 (1), 74-80. [Article]

BARROS, Sara O., STEVENS, Robert and CRANTON, Wayne (2000). Enhancement of the LETFEL device optical outcoupling via the fabrication of novel geometry structures. Proceedings of SPIE - The International Society for Optical Engineering, 3955, 141-150. [Article]

MIAS, C., TSAKONAS, C., PROUNTZOS, N., KOUTSOGEORGIS, D. C., LIEW, S. C., OSWALD, C., RANSON, R., CRANTON, Wayne and THOMAS, C. B. (2000). Optically transparent microstrip antennas. IEE Colloquium (Digest) (2), 51-56. [Article]

MASTIO, E. A., CRANTON, Wayne and THOMAS, C. B. (2000). Pulsed laser annealing for high-efficiency thin film electroluminescent devices. Journal of Applied Physics, 88 (3), 1606-1611. [Article]

MASTIO, E. A., CRANTON, Wayne, THOMAS, C. B., FOGARASSY, E. and DE UNAMUNO, S. (1999). Pulsed KrF laser annealing of RF sputtered ZnS:Mn thin films. Applied Surface Science, 138-13 (1-4), 35-39. [Article]

MASTIO, E. A., CRAVEN, M. R., CRANTON, Wayne, THOMAS, C. B., ROBINO, M. and FOGARASSY, E. (1999). The effects of KrF pulsed laser and thermal annealing on the crystallinity and surface morphology of radiofrequency magnetron sputtered ZnS:Mn thin films deposited on Si. Journal of Applied Physics, 86 (5), 2562-2570. [Article]

THOMAS, C. B., MCCLEAN, I. P., STEVENS, R. and CRANTON, Wayne (1994). TFEL optoelectronic integrated circuit on Si. Electronics Letters, 30 (16), 1350-1351. [Article]

STEVENS, R., THOMAS, C. B. and CRANTON, Wayne (1994). Enhancing the brightness of thin-film electroluminescent displays by improving the emission process. IEEE Electron Device Letters, 15 (3), 97-99. [Article]

THOMAS, C. B. and CRANTON, Wayne (1993). High efficiency ZnS:Mn ac thin film electroluminescent device structure. Applied Physics Letters, 63 (23), 3119-3121. [Article]