Items where Author is "Luo, Quanshun"

GUO, Xiuhua, XU, Guoyang, LI, Shaolin, SONG, Kexing, LIU, Song, WANG, Xu, LUO, Quanshun, LIU, Haitao and SONG, Hao (2024). Enhanced plastic deformation ability of copper matrix composites through synergistic strengthening of nano-Al2O3 and Cr particles. Materials Science and Engineering: A, 910: 146886. [Article]

GUO, Xiuhua, SONG, Kexing, DUAN, Kaiyue, LUO, Quanshun, LI, Kai and MIAO, Xiaojun (2024). Microstructure and arc erosion behavior of WC/CuCr30 composites based on nano-Cr precipitation. Vacuum, 222: 112954. [Article]

LUO, Quanshun, SHEN, Jing, WANG, Xudong, FARMILO, Nick and GUO, Xiuhua (2024). Microstructure evolution and tribo-oxidation induced by friction and wear of cast iron brake discs. Surface Science and Technology, 2: 1. [Article]

LUO, Quanshun, KITCHEN, Matthew, LI, Jianbin, LI, Wenbo and LI, Yanzheng (2023). Experimental investigation on the spalling failure of a railway turnout made from Hadfield steel. Wear, 523: 204779. [Article]

LUO, Quanshun and KITCHEN, Matthew (2023). Microhardness, Indentation Size Effect and Real Hardness of Plastically Deformed Austenitic Hadfield Steel. Materials, 16 (3): 1117. [Article]

MEI, Haijuan, DING, Ji Cheng, YAN, Kai, PENG, Weichao, ZHAO, Cancan, LUO, Quanshun, GONG, Weiping, REN, Fuzeng and WANG, Qimin (2022). Effects of V and Cu codoping on the tribological properties and oxidation behavior of AlTiN coatings. Ceramics International, 48 (15), 22317-22327. [Article]

GAO, Yu-bi, LI, Xiu-yan, MA, Yuan-jun, KITCHEN, Matthew, DING, Yu-tian and LUO, Quanshun (2022). Formation mechanism and wear behavior of gradient nanostructured Inconel 625 alloy. Transactions of Nonferrous Metals Society of China, 32 (6), 1910-1925. [Article]

LUO, Quanshun (2022). A modified X-ray diffraction method to measure residual normal and shear stresses of machined surfaces. International Journal of Advanced Manufacturing Technology, 119 (5-6), 3595-3606. [Article]

LUO, Quanshun and ZHU, Jingzhi (2022). Wear property and wear mechanisms of high-manganese austenitic Hadfield steel in dry reciprocal sliding. Lubricants, 10 (3). [Article]

ZHONG, Lingqiang, WANG, Zhigang, LUO, Quanshun and LIU, Weizhen (2022). Effects of cerium addition on the microstructure, mechanical properties and strain hardening behavior of TWIP steel Fe-18Mn-0.6C. Materials Characterization, 183. [Article]

ZHONG, Lingqiang, WANG, Zhigang, LUO, Quanshun and LIU, Weizhen (2022). Effects of cerium addition on the microstructure, mechanical properties and strain hardening behaviour of TWIP steel Fe-18Mn-0.6c. Materials Characterization, 183, p. 11626. [Article]

MEI, Haijuan, DING, Jicheng, ZHAO, Junfeng, WANG, Ting, HUANG, Kaijian, GUO, Zhaohui, LUO, Quanshun and GONG, Weiping (2021). Effect of Charge Voltage on the Microstructural, Mechanical, and Tribological Properties of Mo–Cu–V–N Nanocomposite Coatings. Coatings, 11 (12), p. 1565. [Article]

MEI, Haijuan, DING, Jicheng, ZHAO, Junfeng, WANG, Ting, HUANG, Kaijian, GUO, Zhaohui, LUO, Quanshun and GONG, Weiping (2021). Effect of Charge Voltage on the Microstructural, Mechanical, and Tribological Properties of Mo−Cu−V−N Nanocomposite Coatings. Coatings, 11 (12). [Article]

GAO, Yubi, DING, Yutian, LI, Haifeng, DONG, Hongbiao, ZHANG, Ruiyao, LI, Jun and LUO, Quanshun (2021). Grain-size dependent elastic-plastic deformation behaviour of inconel 625 alloy studied by in-situ neutron diffraction. Intermetallics, 138, p. 107340. [Article]

NICOLAOU, Nicolas, LUO, Quanshun, GILES, Stephen N., MARUTHAINAR, Kunalan, KITCHEN, Matthew P., THOMAS, Simon, FERNANDES, James A. and ROPOSCH, Andreas (2021). Mechanical Analysis of Explanted Telescopic Rods in the Management of Osteogenesis Imperfecta: A Multicenter Study. Journal of Pediatric Orthopaedics, 41 (6), e448-e456. [Article]

GAO, Yubi, DING, Yutian, HAIFENG, Li, DONG, Hongbiao, ZHANG, Ruiyao, LI, Jun and LUO, Quanshun (2021). Effect of Deformation Rate on the Elastic-Plastic Deformation Behavior of GH3625 Alloy. Acta Metallurgica Sinica. [Article]

LUO, Quanshun, MEI, Haijuan, KITCHEN, Matthew, GAO, Yubi and BOWEN, Leon (2021). Effect of short-term low-temperature austempering on the microstructure and abrasive wear of medium-carbon low-alloy steel. Metals and Materials International. [Article]

LUO, Quanshun, LI, Jianbin, YAN, Qintai, LI, Wenbo, GAO, Yubi, KITCHEN, Matthew, BOWEN, Leon, FARMILO, Nick and DING, Yutain (2021). Sliding wear of medium-carbon bainitic/martensitic/austenitic steel treated by short-term low-temperature austempering. Wear. [Article]

MEI, Haijuan, DING, Ji Cheng, XIAO, Xiaolan, LUO, Quanshun, WANG, Rui, ZHANG, Quan, GONG, Weiping and WANG, Qimin (2020). Influence of pulse frequency on microstructure and mechanical properties of Al-Ti-V-Cu-N coatings deposited by HIPIMS. Surface and Coatings Technology. [Article]

MEI, Haijuan, GENG, Dongsen, WANG, Rui, CHENG, Lixia, DING, Ji Cheng, LUO, Quanshun, ZHANG, Teng Fei and WANG, Qimin (2020). Effect of Cu doping on the microstructure and mechanical properties of AlTiVN-Cu nanocomposite coatings. Surface and Coatings Technology, p. 126490. [Article]

MEI, Haijuan, LUO, Quanshun, HUANG, Xueli, DING, Ji Cheng, ZHANG, Teng Fei and WANG, Qimin (2018). Influence of lubricious oxides formation on the tribological behavior of Mo-V-Cu-N coatings deposited by HIPIMS. Surface and Coatings Technology, 358, 947-957. [Article]

LUO, Quanshun, ABBASI, Erfan and OWENS, Dave (2018). Microstructural Characteristics and Mechanical Properties of Low-Alloy, Medium-Carbon Steels After Multiple Tempering. Acta Metallurgica Sinica, 32 (1), 74-88. [Article]

LUO, Quanshun (2018). Electron Microscopy and Spectroscopy in the Analysis of Friction and Wear Mechanisms. Lubricants, 6 (58), 1-19. [Article]

ABBASI, Erfan, LUO, Quanshun and OWENS, Dave (2018). A comparison of microstructure and mechanical properties of low-alloy-medium-carbon steels after quench-hardening. Materials Science and Engineering: A, 725, 65-75. [Article]

LUO, Quanshun (2018). Characterization of short-range ordered domains using quantitative X-ray diffraction. Nanoscience and Nanotechnology Letters, 10 (5-6), 835-842. [Article]

ABBASI, Erfan, LUO, Quanshun and OWENS, Dave (2018). Case Study: Wear Mechanisms of NiCrVMo-steel and CrB-steel Scrap Shear Blades. Wear, 398-39, 29-40. [Article]

ZHENG, Hun, ZHOU, Hui, GUI, Binhua, LUO, Quanshun, LI, Haixu and WANG, Qimin (2017). Influence of power pulse parameters on the microstructure and properties of the AlCrN coatings by a modulated pulsed power magnetron sputtering. Coatings, 7 (12), p. 216. [Article]

LUO, Quanshun and YANG, Shicai (2017). Uncertainty of the X-ray Diffraction (XRD) sin2 ψ Technique in Measuring Residual Stresses of Physical Vapor Deposition (PVD) Hard Coatings. Coatings, 7 (8), 128-18. [Article]

LUO, Quanshun, KITCHEN, Matthew and ABUBAKRI, Shahriar (2017). Effect of austempering time on the microstructure and carbon partitioning of ultrahigh strength steel 56NiCrMoV7. Metals, 7 (7), p. 258. [Article]

LUO, Quanshun, OLUWAFEMI, Oluwaseun, KITCHEN, Matthew and YANG, Shicai (2016). Tribological properties and wear mechanisms of DC pulse plasma nitrided austenitic stainless steel in dry reciprocating sliding tests. Wear, 376. [Article]

YANG, Shicai, LUO, Quanshun, SUN, Hailing, KITCHEN, Matthew and COOKE, Kevin (2016). Physical and tribological properties of Nitrided AISI 316 stainless steel balls. MATEC Web of Conferences, 77, 01037. [Article]

YANG, Shicai, KITCHEN, Matthew, LUO, Quanshun, IEVLEV, Daniel N and COOKE, Kevin (2016). Effect of nitriding time on the structural evolution and properties of austenitic stainless steel nitrided using high power pulsed DC glow discharge Ar/N2 plasma. Journal of Coatings Science and Technology, 3 (2), 62-72. [Article]

LUO, Quanshun (2016). A new XRD method to quantify plate and lath martensites of hardened medium-carbon steel. Journal of Materials Engineering and Performance, 25 (6), 2170-2179. [Article]

ROURKE, K., EBRAHIM, M., LUO, Quanshun and WILSON, E A (2016). Hump on upper shelf of ductile-brittle transition temperature curve of a plain carbon steel. Materials Science and Technology, 27 (3), 693-695. [Article]

LUO, Quanshun, KITCHEN, Matthew, PATEL, V., FILLEU, M. and OWENS, D. (2015). Partial-Isothermally-Treated Low Alloy Ultrahigh Strength Steel With Martensitic/Bainitic Microstructure. In: HSLA Steels 2015, Microalloying 2015 and Offshore Engineering Steels 2015 Conference Proceedings. Wiley, 433-438. [Book Section]

LUO, Quanshun, KITCHEN, Matthew, PATEL, Vinay, FILLEU, Martin and OWENS, Dave (2015). Partial-Isothermally-Treated Low Alloy Ultrahigh Strength Steel With Martensitic/Bainitic Microstructure. In: HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015. Hoboken, NJ, John Wiley & Sons, 433-438. [Book Section]

LUO, Quanshun and YANG, Shicai (2015). From micro to nano scales -recent progress in the characterization of nitrided austenitic stainless steels. International Journal of Nanomedicine and Nanosurgery, 1 (1), 1-11. [Article]

MA, C., WANG, S.C., WOOD, R.J.K., ZEKONYTE, J., LUO, Quanshun and WALSH, F.C. (2013). Hardness of porous nanocrystalline Co-Ni electrodeposits. Metals and Materials International, 19 (6), 1187-1192. [Article]

LUO, Quanshun (2013). Tribofilms in solid lubricants. In: WANG, Q. Jane and CHUNG, Yip-Wah, (eds.) Encyclopedia of Tribology. Springer. [Book Section]

LUO, Quanshun, YANG, S. and COOKE, K.E. (2013). Hybrid HIPIMS and DC magnetron sputtering deposition of TiN coatings: Deposition rate, structure and tribological properties. Surface and Coatings Technology, 236, 13-21. [Article]

LUO, Quanshun, KITCHEN, Matthew, PATEL, Vinay and MAGOWAN, Stephen (2012). Carbon partitioning and structure evolution in the hardening treatments of high strength steel. In: 20th Congress of International Federation for Heat Treatment and Surface Engineering, Beijing, China, 23-25 October 2012. (Unpublished) [Conference or Workshop Item]

LUO, Quanshun, YANG, S., COOKE, K.E. and MAGOWAN, Stephen (2012). Structure and tribological properties of TiN coatings grown by hybrid JIPIMS and CFUBMS deposition. In: 20th Congress of International Federation for Heat Treatment and Surface Engineering, Beijing, China, 23-25 October 2012. [Conference or Workshop Item]

LUO, Quanshun, CHI, Kuangnan, LI, Shuxin and BARNARD, Pete (2012). Microstructural stability and lattice misfit characterization of nimonic 263. In: Proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference. Volume 6, Materials and fabrication, Parts A and B. ASME, 281-290. [Book Section]

LUO, Quanshun, WANG, Shun Cai, ZHOU, Zhaoxia and CHEN, Linghao (2011). Structure characterization and tribological study of magnetron sputtered nanocomposite nc-TiAlV(N, C)/a-C coatings. Journal of Materials Chemistry, 21, 9746-9756. [Article]

LUO, Quanshun (2011). Temperature dependent friction and wear of magnetron sputtered coating TiAlN/VN. Wear, 271 (9-10), 2058-2066. [Article]

ZHOU, Z., CALVERT, C.C., RAINFORTH, W.M., LUO, Quanshun, CHENG, Lixin and HOVSEPIAN, Papken (2006). Investigating worn surfaces of nanoscale TiAlN/VN multilayer coating using FIB and TEM. Journal of Physics: Conference Series, 26 (1), 95-98. [Article]

HOVSEPIAN, Papken, LUO, Quanshun, ROBINSON, Gary, PITTMAN, Manfred, HOWARTH, Martin, DOERWALD, D., TIETEMA, R., SIM, W. M., DEEMING, A. and ZEUS, T. (2005). TiAIN superlattice structured PVD coatings: a new alternative in the machining of aluminium alloys for aerospace and automotive components. Surface and coatings technology, 201 (1-2), 265-272. [Article]

HOVSEPIAN, Papken, LUO, Quanshun, ROBINSON, Gary, PITTMAN, M., HOWARTH, Martin, DOERWALD, D., TIETEMA, R., SIM, W.M., DEEMING, A. and ZEUS, T. (2005). TiAlN/VN superlattice structured PVD coatings: A new alternative in machining of aluminium alloys for aerospace and automotive components. Surface and Coatings Technology, 201 (1-2), 265-272. [Article]

HOVSEPIAN, Papken, LEWIS, D.B., LUO, Quanshun, MÜNZ, W.D., MAYRHOFER, P.H., MITTERER, C., ZHOU, Z. and RAINFORTH, W.M. (2005). TiAlN based nanoscale multilayer coatings designed to adapt their tribological properties at elevated temperatures. Thin Solid Films, 485 (1-2), 160-168. [Article]

LUO, Quanshun, ROBINSON, Gary, PITTMAN, Manfred, HOWARTH, Martin, SIM, W.M., STALLEY, M.R., LEITNER, H., EBNER, R., CALISKANOGLU, D. and HOVSEPIAN, Papken (2005). Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651. Surface and Coatings Technology, 200, 123-127. [Article]

DOERWALD, D., KRUG, T., TIETEMA, R., SIM, W.M., LUO, Quanshun and HOVSEPIAN, Papken (2004). New tool coatings for light metal cutting. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 25 (5), 832-836. [Article]

HOLBERY, J. D., PFLUEGER, E., SAVAN, A., GERBIG, Y., LUO, Quanshun, LEWIS, D. B. and MUNZ, W. D. (2003). Alloying MoS2 with Al and Au: structure and tribological performance. Surface and Coatings Technology, 169 (170), 716-720. [Article]

RAINFORTH, W. M., LEONARD, A. J., PERRIN, C., BEDOLLA-JACUINDE, A., WANG, Y., JONES, H. and LUO, Quanshun (2002). High resolution observations of friction-induced oxide and its interaction with the worn surface. Tribology International, 35 (11), 731-748. [Article]

LUO, Quanshun, RAINFORTH, W.M. and MÜNZ, W.D. (2001). Wear mechanisms of monolithic and multicomponent nitride coatings grown by combined arc etching and unbalanced magnetron sputtering. Surface and Coatings Technology, 146/7, 430-435. [Article]

LUO, Quanshun, RAINFORTH, W. Mark and MÜNZ, W. Dieter (2001). TEM studies of the wear of TiAlN/CrN superlattice coatings. Scripta Materialia, 45 (4), 399-404. [Article]

LUO, Quanshun, RAINFORTH, W.M. and MÜNZ, W.D. (1999). TEM observations of wear mechanisms of TiAlCrN and TiAlN/CrN coatings grown by combined steered-arc/unbalanced magnetron deposition. Wear, 225-22 (I), 74-82. [Article]

LUO, Quanshun, RAINFORTH, W.M., DONOHUE, L.A., WADSWORTH, I. and MÜNZ, W.D. (1999). Tribological investigation of TiAlCrN and TiAlN/CrN coatings grown by combined steered-arc/unbalanced magnetron deposition. Vacuum, 53 (1-2), 123-126. [Article]

LUO, Quanshun, XIE, J. and SONG, Y. (1995). Effects of microstructures on the abrasive wear behaviour of spheroidal cast iron. Wear, 184 (1), 1-10. [Article]

LUO, Quanshun, XIE, J and LU, W (1993). Investigation of the wear failure mechanism of a flour milling roller. Wear, 161 (1-2), 11-16. [Article]