Items where Author is "Tittagala, Sunil"

TITTAGALA, Sunil, BEELEY, P.R. and BRAMLEY, A.N. (1983). Evaluation of some new cast hot-work die steels using simulation wear test. Metals Technology, 10 (1), 257-263.

TITTAGALA, Sunil, BEELEY, P.R. and BRAMLEY, A.N. (1983). Hot work tool wear test machine. Metallurgia, 50 (10), 434-436.

TITTAGALA, Sunil, BEELEY, P.R. and BRAMLEY, A.N. (1982). Wear test for hot-working die steels. Metals Technology, 9 (1), 434-439.

TITTAGALA, Sunil (2004). Teaching Manufacturing Technology Effectively in a Diversifying Mechanical Engineering Curriculum. In: Transactions of the Institution of Engineers. Institution of Engineers Sri Lanka, 389-397.

TITTAGALA, Sunil and SENADHEERA, P.D.R.S. (2001). Integration of Mechatronics: Strategies and Some Case Studies. In: NANAYAKKARA, J.F, (ed.) Proceedings of the conference on future directions & strategies in mechanical engineering education - beyond 2000. Moratuwa, Sri Lanka, Department of Mechanical Engineering, University of Moratuwa, 95-101.

TILAKAWARDENA, D and TITTAGALA, Sunil (1996). A Nitriding Technique for Improving Die Life. In: Proceedings of symposium on industry related research 1995. Moratuwa, Sri Lanka, Engineering Research Unit, University of Moratuwa, Sri Lanka, 69-78.

TITTAGALA, Sunil (2023). A Level mechanics: the interface with aerospace, automotive and mechanical engineering. In: The Association of Science Education (ASE) Annual Conference 2023, Sheffield, UK, 05-07 Jan 2023. The Association of Science Education (ASE). (Unpublished)

TITTAGALA, Sunil (2022). A-Level mechanics in mechanical, aerospace, and automotive engineering. In: IMA Festival of Mathematics and its Applications 2022, Sheffield, UK, 04-05 Jul 2022. The Institute of Mathematics and its Applications in partnership with Sheffield Hallam University.. (Unpublished)

TITTAGALA, Sunil, HADIDIMOUD, Saeid and LIANG, Bo (2015). Challenges in delivering the UK-SPEC learning outcomes in engineering - a non-Russell Group sector experience. In: ACES Learning and Teaching Conference “Students as Partners”, Sheffield, 16 Sep 2015. Faculty of ACES, Sheffield Hallam University. (Unpublished)

TITTAGALA, Sunil, BRAMHALL, Mike and PETTIGREW, Mark (2008). Teaching Engineering in a Simulated Industrial Learning Environment: a Case Study in Manufacturing Engineering. In: EE2008 International Conference on Innovation, Good Practice and Research in Engineering Education, University of Loughborough. Higher Education Academy Engineering Subject Centre.

TITTAGALA, Sunil (2005). Implementation of career guidance programmes in the university sector. In: National Workshop on the Coordination of Career Guidance, National Human Resource Development Council (NHRDC) of the Ministry of Skills Development, Vocational and Technical Education, Colombo, Sri Lanka, 05-06 Oct 2005. National Human Resource Development Council (NHRDC) of the Ministry of Skills Development, Vocational and Technical Education. (Unpublished)

TITTAGALA, Sunil (2004). Incorporation of social harmony concepts into the career guidance programme. In: Workshop on Social Harmony Component in Higher Education, Kandalama, Sri Lanka, 16-17 March 2004. University Grants Commission, Sri Lanka. (Unpublished)

TITTAGALA, Sunil (2003). The role of the institutes of higher learning in modernization of the industry. In: Seminar on Modern Technologies -The need for Modern Technologies and the relevant Competencies in the Local Industry, Colombo, Sri Lanka, 11-12 Nov 2003. TiAT (Training in Advanced Technologies # Project) in association with the GTZ (German Technical Cooperation), Ceylon National Chamber of Industries and Institution of Engineers, Sri Lanka. (Unpublished)

TITTAGALA, Sunil (2001). Setting up of Industry Advisory Boards at Universities – Moratuwa University Experience (Discussion paper). In: UGC – ADB (Science & Technology Personnel Development Project) joint Workshop, Colombo, Sri Lanka, 13 Dec 2001. UGC – ADB (Science & Technology Personnel Development Project) joint Workshop. (Unpublished)

TITTAGALA, Sunil (2001). Manufacturing education: the industry interface. In: Conference on Future Directions and Strategies in Mechanical Engineering Education – Beyond 2000, Moratuwa, Sri Lanka, 2001. University of Moratuwa.

TITTAGALA, Sunil (2001). Role of the Universities in Mechanical Engineering Design. In: Public Seminar on Mechanical Engineering Design in Sri Lanka, The Institution of Engineers, Auditorium II, Colombo, Sri Lanka, 24 March 2001. The Institution of Engineers, Sri Lanka. (Unpublished)

TITTAGALA, Sunil and NAVARATHNA, NPNM (2000). Design and Construction of an Energy-Efficient Furnace for Melting Non-ferrous Alloys in Local Foundry Industry. In: Proceedings of the ERU Seminar on Research for Industry - 2000, University of Moratuwa, Sri Lanka, December 2000. Engineering Research Unit, University of Moratuwa, Sri Lanka. (Unpublished)

TITTAGALA, Sunil (1999). Career Guidance Activities at the University of Moratuwa (Status Report). In: Workshop for Review of Career Guidance Services at Universities, Sabaragamuwa University, Sri Lanka., 10 July- 11 July 1999.. University Grants Commission, Sri Lanka. (Unpublished)

TITTAGALA, Sunil (1998). Materials and Defects - Improvement of Product Quality in Industry through Non-Destructive Testing. In: Seminar on Improvement of Product Quality in Industry through Non-Destructive Testing, Colombo, Sri Lanka, 21 March 1998. The Atomic Energy Authority in association with the Society for Non-Destructive Testing. (Unpublished)

TITTAGALA, Sunil and WIJAYATHUNGA, VN (1996). Serviceability of Bolt-Nut Assemblies. In: Proceedings of the ERU Seminar on Research for Industry - 1996, University of Moratuwa, Sri Lanka, 31 May 1996. Engineering Research Unit, University of Moratuwa, Sri Lanka. (Unpublished)

TITTAGALA, Sunil (1994). Electrical discharge machining (EDM) - introductory workshop on CAD/CAM. In: Introductory Workshop on CAD/CAM conducted in association with the Agricultural Machinery Manufacturers Association of Sri Lanka, Moratuwa, Sri Lanka, 01 Dec 1994. University of Moratuwa and AMMA. (Unpublished)

TITTAGALA, Sunil (1993). The role of coordinate measuring machines in CAM. In: Workshop on Computer-Aided Manufacture, Colombo, Sri Lanka, 21-26 Jun 1993. The Open University of Sri Lanka in association with the Commonwealth Science Council. (Unpublished)

TITTAGALA, Sunil (1993). Cutting tools in CNC machining. In: Workshop on Computer-Aided Manufacture, Colombo, Sri Lanka, 21-26 Jun 1993. The Open University of Sri Lanka in association with the Commonwealth Science Council. (Unpublished)

TITTAGALA, Sunil (1990). The technology of heat treatment. In: Workshop on Heat Treatment of Steel for Small and Medium Industries, Colombo, Sri Lanka, 14 November 1990. Project SMED (Small and Medium Enterprise Development). (Unpublished)

TITTAGALA, Sunil (1990). Metal-working Industry in Sri Lanka : welding, casting and metal-forming (Country Report). In: Seminar on Welding, Casting and Metal-forming, Tokyo, Japan, 06-09 Mar 1990. Science and Technology Agency of Japan, 301-319.

TITTAGALA, Sunil (1985). New materials and tools. In: Seminar on Robotics and Automation for Sri Lanka, Moratuwa, Sri Lanka, 01 December 1985. University of Moratuwa in association with the Arthur C Clarke Centre for Modern Technologies. (Unpublished)