Items where Research Institute, Centre or Group is "Systems Modelling and Integration Group"
- University Structure (62)
- Materials and Engineering Research Institute (62)
- Centre for Automation and Robotics Research (62)
- Systems Modelling and Integration Group (62)
- Centre for Automation and Robotics Research (62)
- Materials and Engineering Research Institute (62)
Number of items at this level: 62.
Restricted
LANAROLLE, W.D.G, PERERA, Terrence and YAPA, T.S.D.
(2014).
Performance improvement best practices applicable to the Sri Lankan apparel industry.
In:
Proceedings of the 3rdInternational Conference on Management and Economics : Reshaping Management and Economic Thinking through Integrating Eco-Friendly and Ethical Practices.
Sri Lanka, Faculty of Management and Finance, University of Ruhuna, 131-140.
Public
ALKALI, Abdulkadir, SAATCHI, Reza, ELPHICK, Heather and BURKE, Derek
(2017).
Thermal image processing for real-time noncontact respiration rate monitoring.
IET Circuits, Devices and Systems, 11 (2), 142-148.
BAMBER, T, GUO, J, SINGH, J, BIGHARAZ, Masoud, PETZING, J, BINGHAM, Paul, JUSTHAM, L, PENDERS, Jacques and JACKSON, M
(2017).
Visualization methods for understanding the dynamic electroadhesion phenomenon.
Journal of Physics D: Applied Physics, 50, p. 205304.
BELLUOMO, Carlo, LENZO, Basilio, BUCCHI, Francesco and VELARDOCCHIA, Mauro
(2018).
Design, analysis and investigation of an independent suspension for passenger cars.
In: CARBONE, Giuseppe and GASPARETTO, Alessandro, (eds.)
Advances in Italian Mechanism Science: Proceedings of the Second International Conference of IFToMM Italy.
Mechanisms and Machine Science, 68
(68).
Netherlands, Springer, 165-173.
GUO, Jianglong, BAMBER, Thomas, SINGH, Jatinder, MANBY, David, BINGHAM, Paul, JUSTHAM, Laura, PETZING, Jon, PENDERS, Jacques and JACKSON, Michael
(2017).
Experimental study of a flexible and environmentally stable electroadhesive device.
Applied Physics Letters, 111 (25), p. 251603.
MOHAMED, Abdel and SAAD, Sameh
(2016).
Development of risk assessment model for equipment within the petroleum industry.
IFAC Papers Online, 49 (28), 37-42.
MOHAMED, Abdel and SAAD, Sameh
(2016).
Fuzzy analytical hierarchy process for the selection of maintenance policies within petroleum industry.
In: GOH, Yee Mey and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXX : Proceedings of the 14th International Conference on Manufacturing Research, incorporating the 31st National Conference on Manufacturing Research, September 6-8, 2016 Loughborough University, UK.
Advances in transdisciplinary engineering
(3).
Amsterdam, IOS Press, 529-534.
PIERALICE, Cristiano, LENZO, Basilio, BUCCHI, Francesco and GABICCINI, Marco
(2018).
Vehicle sideslip angle estimation using Kalman filters: modelling and validation.
In: CARBONE, Giuseppe and GASPARETTO, Alessandro, (eds.)
Advances in Italian Mechanism Science: Proceedings of the Second International Conference of IFToMM ITALY.
Mechanisms and Machine Science, 68
(68).
Netherlands, Springer, 114-122.
QUAGLIA, Giuseppe, CAVALLONE, Paride and LENZO, Basilio
(2018).
On the dynamic analysis of a novel snake robot: preliminary results.
In: CARBONE, Giuseppe and GASPARETTO, Alessandro, (eds.)
Advances in Italian Mechanism Science: Proceedings of the Second International Conference of IFToMM Italy.
Mechanisms and Machine Science
(68).
Springer, 275-285.
SAAD, Sameh
(2016).
The impact of external disturbances on the performance of a cellular manufacturing systems.
International Journal of Service and Computing Oriented Manufacturing., 2 (1), 1-32.
SAAD, Sameh and AL AFIFI, Maan
(2015).
The ABCD Validation Management Tool for business excellence models.
WSEAS Transaction on Business and Economics, 12, 363-376.
SAAD, Sameh and BAHADORI, Ramin
(2018).
Development of an information fractal to optimise inventory in the supply network.
International Journal of Service and Computing Oriented Manufacturing, 3 (2/3), 127-150.
SAAD, Sameh and BAHADORI, Ramin
(2020).
Logistics capabilities measurement in the fractal supply network.
International Journal of Logistics Systems and Management (IJLSM), 36 (2), 251-281.
SAAD, Sameh and BAHADORI, Ramin
(2016).
Responsiveness optimisation in the fractal supply network.
In: GOH, Yee Mey and CASE, Keith, (eds.)
Advances in manufacturing technology XXX : Proceedings of the 14th International Conference on Manufacturing Research, incorporating the 31st National Conference on Manufacturing Research, September 6-8, 2016 Loughborough University, UK.
Advances in transdisciplinary engineering
(3).
Amsterdam, IOS Press, 457-462.
SAAD, Sameh and BAHADORI, Ramin
(2016).
An information fractal for supply network inventory optimisation.
In: AFFENZELLER, Michael, LONGO, Francesco, MERKURYEV, Yury, BRUZZONE, Agostino G. and PIERA, Miquel Angel, (eds.)
18th International Conference on Harbor, Maritime and Multimodal Logistics Modeling and Simulation (HMS 2016) : held at the 13th International Multidisciplinary Modeling and Simulation Multiconference (I3M 2016) : Larnaca, Cyprus, 26-28 September 2016.
Red Hook, NY, Curran Associates, Inc. (2016), 28-34.
SAAD, Sameh and KHAMKHAM, Mohamed
(2016).
Development of Lean Six-Sigma conceptual implementation model for manufacturing organisations.
In: GOH, Yee Mey and CASE, Keith, (eds.)
Advances in manufacturing technology XXX : Proceedings of the 14th International Conference on Manufacturing Research, incorporating the 31st National Conference on Manufacturing Research, September 6-8, 2016 Loughborough University, UK.
Advances in transdisciplinary engineering
(3).
Amsterdam, IOS Press, 497-502.
SAAD, Sameh and KHAMKHAM, Mohamed
(2018).
Development of an integrated quality management conceptual framework for manufacturing organisations.
Procedia manufacturing, 17, 587-594.
SAAD, Sameh, KUNHU, Noufal and MOHAMED, Abdalah
(2015).
A fuzzy-AHP multi-criteria decision making model for procurement process.
International Journal of Logistics Systems and Management (IJLSM), 23 (1), 1-24.
SAAD, Sameh M., MERINO PEREZ, Castor David and VEGA ALVARADO, Victor Enrique
(2017).
Development of a mechanism to facilitate the safety stock planning configuration in ERP.
Production & Manufacturing Research, 5 (1), 42-56.
SALAMA, Abdussalam, SAATCHI, Reza and BURKE, Derek
(2017).
Adaptive sampling technique using regression modelling and fuzzy inference system for network traffic.
In: CUDD, Peter and DE WITTE, Luc, (eds.)
Harnessing the power of technology to improve lives.
Studies in Health Technology and Informatics
(242).
IOS Press, 592-599.
SALEH, Ibrahim M., ALI, Rashid and ZHANG, Hongwei
(2018).
Environmental Impact of High Altitudes on the Operation of PEM Fuel Cell Based UAS.
Energy and Power Engineering, 10 (03), 87-105.
None
DARMANATA, J., SOMOHANO, C., SAAD, S. and PERERA, T.
(2010).
A sustainability value system principle for a global supply chain.
In: 5th International Conference on Responsive Manufacturing - Green Manufacturing, ICRM 2010, Ningbo, Zhejiang China, 11-13 January 2010.
329-334.
HUGHES, Ruby and PERERA, Terrence
(2009).
Embedding simulation technologies into business processes: challenges and solutions.
International Journal of Simulation and Process Modelling, 5 (3), 184-191.
KOH, S. C. L., GUNASEKARAN, A. and SAAD, S. M.
(2006).
Parts verification for multi-level-dependent demand manufacturing systems: a recognition and classification structure.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 31 (3-4), 305-315.
KOH, S. C. L., GUNASEKARAN, A. and SAAD, S. M.
(2007).
Tackling uncertainty in ERP-controlled manufacturing environment: A knowledge management approach.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 31 (7-8), 833-840.
KOH, S. C. L. and SAAD, S. M.
(2002).
Development of a business model for diagnosing uncertainty in ERP environments.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 40 (13), 3015-3039.
KOH, S. C. L. and SAAD, S. M.
(2003).
MRP-controlled manufacturing environment disturbed by uncertainty.
In: 12th International Conference of Flexible Automation and Intelligent Manufacturing (FAIM), DRESDEN UNIV TECHNOL DRESDEN GERMANY, 2002.
157-171.
KOH, S. C. L. and SAAD, S. M.
(2006).
Managing uncertainty in ERP-controlled manufacturing environments in SMEs.
In: 17th International Conference on Production Research, Virginia Polytech Inst & State Univ, AUG, 2003.
109-127.
KOH, S. C. L. and SAAD, S. M.
(2003).
A holistic approach to diagnose uncertainty in ERP-controlled manufacturing shop floor.
PRODUCTION PLANNING & CONTROL, 14 (3), 273-289.
KOH, S. C. L. and SAAD, S. M.
(2004).
The use of intelligent feedback for work order release in an uncertain manufacturing system.
In: 13th International Conference on Flexible Automation and Intelligent Manufacturing, Univ S Florida Tampa FL, JUN, 2003.
517-527.
KOH, S. C. L., SAAD, S. M. and JONES, M.H.
(2002).
Uncertainty under MRP-planned manufacture: review and categorization.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 40 (10), 2399-2421.
KOH, S. C. L., SAAD, S. M. and PADMORE, J.
(2004).
Development and implementation of a generic order release scheme for modelling MRP-controlled finite-capacitated manufacturing environments.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 17 (6), 561-576.
LASSILA, A. M., SAAD, S. M., PERERA, T., KOCH, T. and CHROBOT, J.
(2005).
Modelling and simulation of human-centred assembly systems - A real case study.
In: 6th IFIP International Conference on Information Technology for Balanced Automation Systems in Manufacturing and Services, Vienna, AUSTRIA, SEP 27-29, 2004.
405-412.
LIYANAGE, K. and PERERA, T.
(1998).
Design and development of a rapid data collection methodology.
In: INTERNATIONAL CONFERENCE ON SIMULATION '98, UNIV YORK, YORK, ENGLAND, SEP 30-OCT 02, 1998.
297-304.
LIYANAGE, K. and PERERA, T.
(1998).
Rapid data collection in the simulation of manufacturing systems.
In:
ADVANCES IN MANUFACTURING TECHNOLOGY XII.
John Wiley & Sons, 381-389.
MARSH, James and PERERA, Terrence
(2009).
Exploration of the impact of business improvement approach lean six sigma on the environment.
In: Fifth International Conference on Environmental, Cultural, Economic and Social Sustainability, Mauritius, 5-7 January 2009.
(Unpublished)
MARSH, James and PERERA, Terrence
(2012).
The ISO 14001 Standard : analysis into its strengths and weaknesses, and potential opportunities for deployment by tomorrow’s global business.
International Journal of Environmental, Cultural, Economic, and Social Sustainability, 6 (3), 23-36.
MATTEO, M., PERERA, Terrence and DARMANATA, J.
(2011).
Sustaining lean six sigma in healthcare : results from a pilot survey.
In: Third European Research Conference on Continuous Improvement and Lean Six Sigma, Glasgow, Scotland, 28 March 2011.
(Unpublished)
MURPHY, C. A. and PERERA, T.
(2002).
The definition of simulation and its role within an aerospace company.
Simulation Practice and Theory, 9 (6-8), 273-291.
MURPHY, S. P. and PERERA, T.
(2002).
Successes and failures in UK/US development of simulation.
Simulation practice and theory, 9 (6-8), 333-348.
MURPHY, S. P. and PERERA, T.
(2002).
Successes and failures in UK/US development of simulation.
Simulation Practice and Theory, 9 (6-8), 333-348.
PERERA, T.
(1994).
MODELLING AND SIMULATION OF TOOL MANAGEMENT SYSTEMS USING DBMS.
In: CISS - FIRST JOINT CONFERENCE OF INTERNATIONAL SIMULATION SOCIETIES, ETH ZURICH, ZURICH, SWITZERLAND, AUG 22-25, 1994.
435-438.
PERERA, Terrence and RUPASINGHE, Thashika
(2015).
Teaching supply chain simulation - from beginners to professionals.
In:
WSC '15 Proceedings of the 2015 Winter Simulation Conference.
IEEE Press, 3548-3556.
PERERA, Terrence and RUPASINGHE, Thashika
(2015).
Teaching supply chain simulation : from beginners to professionals.
In:
WSC '15 : Proceedings of the 2015 Winter Simulation Conference.
IEEE Press, 3548-3556.
POTTS, Jonathan, LUNNON, Ian, CROWTHER, William, JOHNSON, Graham, HUCKER, Martyn and WARSOP, Clyde
(2009).
Development of a Transonic Wind Tunnel Test Bed for MEMS Flow Control Actuators and Sensors.
In:
47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition.
American Institute of Aeronautics and Astronautics.
ROBERTSON, N. and PERERA, T.
(2002).
Automated data collection for simulation?
Simulation practice and theory, 9 (6-8), 349-364.
ROBERTSON, N. and PERERA, T.
(2002).
Automated data collection for simulation?
Simulation Practice and Theory, 9 (6-8), 349-364.
SAAD, S., KHALIL, E., FOWKES, C., BASARAB-HORWATH, I. and PERERA, T.
(2006).
Taboo search vs genetic algorithms in solving and optimising PCB problems.
Journal of manufacturing technology management, 17 (4), 521-536.
SAAD, S. M.
(2003).
The reconfiguration issues in manufacturing systems.
In: 9th International Manufacturing Conference, HONG KONG, PEOPLES R CHINA, AUG 16-17, 2000.
277-283.
SAAD, S. M., BAYKASOGLU, A. and GINDY, N. N. Z.
(2002).
An integrated framework for reconfiguration of cellular manufacturing systems using virtual cells.
PRODUCTION PLANNING & CONTROL, 13 (4), 381-393.
SAAD, S. M., BAYKASOGLU, A. and GINDY, N. N. Z.
(2002).
A new integrated system for loading and scheduling in cellular manufacturing.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 15 (1), 37-49.
SAAD, S. M. and LASSILA, A. M.
(2004).
Layout design in fractal organizations.
In: 17th International Conference on Production Research, Virginia Polytech Inst & State Univ, Blacksburg, VA, AUG, 2003.
3529-3550.
SAAD, S. M., PERERA, T. and WICKRAMARACHCHI, R.
(2003).
Simulation of distributed manufacturing enterprises: A new approach.
In: 36th Winter Simulation Conference, NEW ORLEANS, LA, DEC 07-10, 2003.
1167-1173.
SAAD, S. M., PERERA, T. and WICKRAMARACHCHI, R.
(2003).
A structured approach for the implementation of distributed manufacturing simulation.
In: 15th European Simulation Symposium Conference, Delft Univ Technol, Delft, NETHERLANDS, OCT 26-29, 2003.
437-442.
SAAD, Sameh and AL AFIFI, Maan
(2015).
ABCD analysis- a new validation model for Dubai Government Excellence Program (DGEP).
International Journal of Economics and Statistics, 3, 128-140.
SAAD, Sameh and BAHADORI, Ramin
(2015).
Cycle stock optimisation in the fractal supply network.
In: PAWAR, K.S., ROGERS, H. and FERRARI, E., (eds.)
The proceedings of 20th International Symposium on Logistics (ISL) : reflections on supply chain research and practice.
Nottingham University Business School., 124-131.
SAAD, Sameh, GOMEZ, C.R. and GINDY, N.
(2001).
The impact of external disturbances on the performance of a cellular manufacturing system.
In: AFFENZELLER, Michael, BRUZZONE, Agostino G., DE FELICE, Fabio, DEL RIO VILAS, David, FRYDMAN, Claudia, MASSEI, Marina and MERKURYEV, Yuri, (eds.)
12th International Conference on Modeling and Applied Simulation (MAS 2013).
Caltek s.r.l., 194-203.
SAAD, Sameh and OGUNSANWO, Adewale
(2016).
Conceptual understanding, design and management of supply chain in 21st century - a review.
In: GOH, Yee Mey and CASE, Keith, (eds.)
Advances in manufacturing technology XXX : Proceedings of the 14th International Conference on Manufacturing Research, incorporating the 31st National Conference on Manufacturing Research, September 6-8, 2016 Loughborough University, UK.
Advances in transdisciplinary engineering
(3).
Amsterdam, IOS Press, 445-500.
SCHORMANN, F. and PERERA, T.
(1998).
Model representation methods in simulation of manufacturing systems.
In: INTERNATIONAL CONFERENCE ON SIMULATION '98, UNIV YORK, YORK, ENGLAND, SEP 30-OCT 02, 1998.
292-296.
SKOOGH, A., PERERA, Terrence and JOHANSSON, B.
(2012).
Input data management in simulation : industrial practices and future trends.
Simulation Modelling Practice and Theory, 29, 181-192.
YU YU, WANG LIFENG, HUANG HUANG and PERERA, T.
(2010).
Modeling and simulation of an outpatient service system.
In: 2010 International Conference on Computer Application and System Modeling (ICCASM), Taiyuan, 22-24 October 2010.
V2-691.
ZHANG, Hongwei
(2009).
Software Sensors and Their Applications in Bioprocess.
In: NICOLETTI, Maria do Carmo and JAIN, Lakhmi C., (eds.)
Computational Intelligence Techniques for Bioprocess Modelling, Supervision and Control.
Studies in Computational Intelligence, 218
(218).
Springer-Verlag, 25-56.