Items where Author is "Saad, Sameh"
Number of items: 41.
SAAD, Sameh, BAHADORI, Ramin, KHAMKHAM, Mohamad and ADI, Karrim
(2024).
The impact of the digital era on the implementation of the traditional six-sigma dmaic- a new dmaise cycle development.
International Journal of Industrial Engineering: Theory, Applications and Practice, 31 (1).
SAAD, Sameh, MAINA, Jemimah, PERERA, Terrence and BAHADORI, Ramin
(2023).
Blockchain-Based traceability system for enhanced humanitarian supply chain management.
In: THOMAS, Andrew, MURPHY, Lyndon, MORRIS, Wyn, DISPENZA, Vincenzo and JONES, David, (eds.)
Advances in Manufacturing Technology XXXVI.
Advances in Transdisciplinary Engineering, 44
(44).
IOS Press, 155-161.
SAAD, Sameh, UBEYWARNA, Dasunika and ZHANG, Hongwei
(2023).
Key Factors Influence the Reconfiguration of Supply Chain Design: A Review Paper.
In: THOMAS, Andrew, MURPHY, Lyndon, MORRIS, Wyn, DISPENZA, Vincenzo and JONES, David, (eds.)
Advances in Manufacturing Technology XXXVI Proceedings of the 20th International Conference on Manufacturing Research, Incorporating the 37th National Conference on Manufacturing Research, 6th – 8th September 2023, Aberystwyth University, UK.
Advances in Transdisciplinary Engineering, 44
.
Amsterdam, IOS Press, 132-137.
BADAKHSHAN, Ehsan, BADAKHSHAN, Ali, SAAD, Sameh, BAHADORI, Ramin and BALL, Peter
(2023).
Using simulation-optimization to integrate financial and product flow planning in supply chains.
In: AFFENZELLER, Michael, BRUZZONE, Agostino G., JIMENEZ, Emilio, LONGO, Francesco and PETRILLO, Antonella, (eds.)
Proceedings of the 35th European Modeling & Simulation Symposium (EMSS 2023).
CAL-TEK srl.
BAHADORI, Ramin, SAAD, Sameh, BADAKHSHAN, Ehsan, PERERA, Terrence and GUNATHILAKA, Ranjika
(2023).
A new eco-friendly initiative for last food mile delivery in urban areas.
In: BRUZZONE, Agostino G., JANOSY, Janos Sebestyen, NICOLETTI, Letizia and ZACHAREWICZ, Gregory, (eds.)
Proceedings of the 11th International Workshop on Simulation for Energy, Sustainable Development & Environment (SESDE 2023).
CAL-TEK srl.
SAAD, Sameh, BAHADORI, RAMIN, BHOVAR, Chandan and ZHANG, Hongwei
(2023).
Industry 4.0 and Lean Manufacturing - A systematic review of the state of the art literature and key recommendations for future research.
International Journal of Lean Six Sigma.
SAAD, Sameh, MAINA, Jemimah, PERERA, Terrence and BAHADORI, Ramin
(2022).
Blockchain technology - understanding its application in humanitarian supply chains.
In: SHAFIK, Mahmoud and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXXV.
Advances in Transdisciplinary Engineering, 25
.
IOS, 385-391.
SAAD, Sameh and MURRAY, Clarke
(2022).
Development of a maintenance strategy to optimise maintenance in a world scale bioethanol production facility.
In: SHAFIK, Mahmoud and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXXV.
Advances in Transdisciplinary Engineering, 25
.
IOS, 354-360.
SAAD, Sameh and ALNUAIMI, Samah
(2022).
Innovation framework for digital era.
In: SHAFIK, Mahmoud and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXXV.
Advances in Transdisciplinary Engineering, 25
.
IOS, 54-59.
SAAD, Sameh and UBEYWARNA, Dasunika
(2022).
Reconfiguration of supply chains in today’s digital era: a review paper.
In: SHAFIK, Mahmoud and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXXV.
Advances in Transdisciplinary Engineering, 25
.
IOS, 367-372.
SAAD, Sameh and KHAMKHAM, Mohamed
(2022).
The applications of AI in GSCM - a systematic literature review.
In: SHAFIK, Mahmoud and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXXV.
IOS, 348-353.
SAAD, Sameh and KOMAL, Samina
(2022).
The role of total quality management in textile industry.
In: SHAFIK, Magmoud and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXXV.
Advances in Transdisciplinary Engineering, 25
.
IOS, 207-214.
SAAD, Sameh, BHOVAR, Chandan, BAHADORI, Ramin and ZHANG, Hongwei
(2021).
Industry 4.0 Application in Lean Manufacturing- A Systematic Review.
In:
Volume 15: Advances in Manufacturing Technology XXXIV.
Advances in Transdisciplinary Engineering
.
IOS press, 341-346.
SAAD, Sameh and BAHADORI, Ramin
(2020).
Logistics capabilities measurement in the fractal supply network.
International Journal of Logistics Systems and Management (IJLSM), 36 (2), 251-281.
SAAD, Sameh and BAHADORI, Ramin
(2019).
Introducing a unique inventory control framework for centralized VMI and JIT production.
IFAC-PapersOnline, 52 (13), 1045-1050.
SAAD, Sameh and BAHADORI, Ramin
(2019).
Development of a Dynamic Information
Fractal Framework to Monitor and Optimise
Sustainability in Food Distribution Network.
International Journal of Food Engineering (IJEF).
SAAD, Sameh and BAHADORI, Ramin
(2019).
Pollution routing problem with time window and split delivery.
In: BRUZZONE, Agostino, JANOSY, Janos Sebestyen, NICOLETTI, Letizia and ZACHAREWICZ, Gregory, (eds.)
The 7th International Workshop on Simulation for Energy, Sustainable Development & Environment.
DIME UNIVERSITÀ DI GENOVA, DIMEG UNIVERSITY OF CALABRIA, 23-29.
SAAD, Sameh and BAHADORI, Ramin
(2018).
Sustainability evaluation of last mile food delivery: Pickup point using lockers versus home delivery.
In: BRUZZONE, Agostino, LONGO, Francesco, PIERA, Miquel and VIGNALE, Giuseppe, (eds.)
International Food Operations and Processing Simulation Workshop (FoodOPS 2018).
CAL-TEK S.r.l., 37-42.
SAAD, Sameh and KHAMKHAM, Mohamed
(2018).
Development of an integrated quality management conceptual framework for manufacturing organisations.
Procedia manufacturing, 17, 587-594.
ZHANG, Hongwei, SAAD, Sameh and JON, Moody
(2018).
Harnessing Brexit, Technology and Insight - British manufacturers; maintaining a competitive edge in an age of uncertainty & opportunity.
Other.
Sheffield Hallam University and SSG Insight.
SAAD, Sameh and BAHADORI, Ramin
(2018).
Development of an information fractal to optimise inventory in the supply network.
International Journal of Service and Computing Oriented Manufacturing, 3 (2/3), 127-150.
SAAD, Sameh, NOGUERA, I, BAHADORI, Ramin and SAAD, S
(2018).
The impact of a consignment inventory strategy in pharmaceutical retail industry.
In: THORVALD, Peter and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXXII Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, September 11–13, 2018, University of Skövde, Sweden.
Advances in Transdisciplinary Engineering
(8).
Amsterdam, IOS Press, 297-302.
SAAD, Sameh and BAHADORI, Ramin
(2017).
The impact of replenishment frequency on the logistics cost-a simulation approach.
In: BOTTANI, Eleonora, BRUZZONE, Agostino G., LONGO, Francesco, MERKURYEV, Yury and PIERA, Miquel Angel, (eds.)
Proceedings of the Int. Conf. on Harbor Maritime and Multimodal Logistics M&S, 2017.
Dime Università Di Genova, 62-67.
SAAD, Sameh, ELSAGHIER, Elganidi H. and EZAGA, David
(2017).
Design and planning petroleum supply chain.
In: GAO, James, EL SOURI, Mohammed and KEATES, Simeon, (eds.)
Advances in Manufacturing Technology. XXXI : Proceedings of the 15th International Conference on Manufacturing Research, Incorporating the 32nd National Conference on Manufacturing Research, September 5–7, 2017, University of Greenwich, UK.
Advances in Transdisciplinary Engineering
(6).
Amsterdam, IOS Press, 351-356.
SAAD, Sameh and BAHADORI, Ramin
(2016).
An information fractal for supply network inventory optimisation.
In: AFFENZELLER, Michael, LONGO, Francesco, MERKURYEV, Yury, BRUZZONE, Agostino G. and PIERA, Miquel Angel, (eds.)
18th International Conference on Harbor, Maritime and Multimodal Logistics Modeling and Simulation (HMS 2016) : held at the 13th International Multidisciplinary Modeling and Simulation Multiconference (I3M 2016) : Larnaca, Cyprus, 26-28 September 2016.
Red Hook, NY, Curran Associates, Inc. (2016), 28-34.
MOHAMED, Abdel and SAAD, Sameh
(2016).
Development of risk assessment model for equipment within the petroleum industry.
IFAC Papers Online, 49 (28), 37-42.
SAAD, Sameh and KHAMKHAM, Mohamed
(2016).
Development of Lean Six-Sigma conceptual implementation model for manufacturing organisations.
In: GOH, Yee Mey and CASE, Keith, (eds.)
Advances in manufacturing technology XXX : Proceedings of the 14th International Conference on Manufacturing Research, incorporating the 31st National Conference on Manufacturing Research, September 6-8, 2016 Loughborough University, UK.
Advances in transdisciplinary engineering
(3).
Amsterdam, IOS Press, 497-502.
MOHAMED, Abdel and SAAD, Sameh
(2016).
Fuzzy analytical hierarchy process for the selection of maintenance policies within petroleum industry.
In: GOH, Yee Mey and CASE, Keith, (eds.)
Advances in Manufacturing Technology XXX : Proceedings of the 14th International Conference on Manufacturing Research, incorporating the 31st National Conference on Manufacturing Research, September 6-8, 2016 Loughborough University, UK.
Advances in transdisciplinary engineering
(3).
Amsterdam, IOS Press, 529-534.
SAAD, Sameh and BAHADORI, Ramin
(2016).
Responsiveness optimisation in the fractal supply network.
In: GOH, Yee Mey and CASE, Keith, (eds.)
Advances in manufacturing technology XXX : Proceedings of the 14th International Conference on Manufacturing Research, incorporating the 31st National Conference on Manufacturing Research, September 6-8, 2016 Loughborough University, UK.
Advances in transdisciplinary engineering
(3).
Amsterdam, IOS Press, 457-462.
SAAD, Sameh
(2016).
The impact of external disturbances on the performance of a cellular manufacturing systems.
International Journal of Service and Computing Oriented Manufacturing., 2 (1), 1-32.
SAAD, Sameh and OGUNSANWO, Adewale
(2016).
Conceptual understanding, design and management of supply chain in 21st century - a review.
In: GOH, Yee Mey and CASE, Keith, (eds.)
Advances in manufacturing technology XXX : Proceedings of the 14th International Conference on Manufacturing Research, incorporating the 31st National Conference on Manufacturing Research, September 6-8, 2016 Loughborough University, UK.
Advances in transdisciplinary engineering
(3).
Amsterdam, IOS Press, 445-500.
SAAD, Sameh, KUNHU, Noufal and MOHAMED, Abdalah
(2015).
A fuzzy-AHP multi-criteria decision making model for procurement process.
International Journal of Logistics Systems and Management (IJLSM), 23 (1), 1-24.
SAAD, Sameh and BAHADORI, Ramin
(2015).
Cycle stock optimisation in the fractal supply network.
In: PAWAR, K.S., ROGERS, H. and FERRARI, E., (eds.)
The proceedings of 20th International Symposium on Logistics (ISL) : reflections on supply chain research and practice.
Nottingham University Business School., 124-131.
SAAD, Sameh and AL AFIFI, Maan
(2015).
ABCD analysis- a new validation model for Dubai Government Excellence Program (DGEP).
International Journal of Economics and Statistics, 3, 128-140.
SAAD, Sameh and AL AFIFI, Maan
(2015).
The ABCD Validation Management Tool for business excellence models.
WSEAS Transaction on Business and Economics, 12, 363-376.
SAAD, Sameh, ARIRIGUZO, Julian and PERERA, Terrence
(2013).
Supplier selection criteria in fractal supply network.
In: EMMANOUILIDIS, Christos, TAISCH, Marco and KIRITSIS, Dimitris, (eds.)
Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services. IFIP WG 5.7 International Conference, APMS 2012, Rhodes, Greece, September 24-26, 2012, Revised Selected Papers, Part II.
IFIP Advances in Information and Communication Technology
(398).
Berlin, Springer-Verlag, 544-551.
SAAD, Sameh and ARIRIGUZO, Julian
(2012).
Simulating the integration of original equipment manufacturing and suppliers in fractal environment.
International Journal of Simulation and Process Modelling (IJSPM), 7 (3), 148-158.
ARIRIGUZO, Julian and SAAD, Sameh
(2011).
Genetic algorithm approach to modelling fractal manufacturing layout.
In: BRUZZONE, Agostino, FRYDMAN, Claudia, MASSEI, Marina, MCGINNIS, Mike, PIERA, Miquel Angel and ZACHAREWICZ, Gregory, (eds.)
10th International Conference on Modeling and Applied Simulation (MAS 2011).
Red Hook, NY, Curran Associates, 126-135.
SAAD, Sameh and LASSILA, Anna M.
(2010).
Methodology for dynamic scheduling and control in biological manufacturing systems.
International Journal of Industrial and Systems Engineering, 5 (3), p. 268.
KHALIL, Jean, SAAD, Sameh and GINDY, Nabil
(2009).
An integrated cost optimisation maintenance model for industrial equipment.
Journal of Quality in Maintenance Engineering, 15 (1), 106-118.
SAAD, Sameh, GOMEZ, C.R. and GINDY, N.
(2001).
The impact of external disturbances on the performance of a cellular manufacturing system.
In: AFFENZELLER, Michael, BRUZZONE, Agostino G., DE FELICE, Fabio, DEL RIO VILAS, David, FRYDMAN, Claudia, MASSEI, Marina and MERKURYEV, Yuri, (eds.)
12th International Conference on Modeling and Applied Simulation (MAS 2013).
Caltek s.r.l., 194-203.