Items where Author is "Akid, Robert"

NICHOL, Tim, CALLAGHAN, Jill, TOWNSEND, Robert, STOCKLEY, Ian, HATTON, Paul V, LE MAITRE, Christine, SMITH, Thomas John and AKID, Robert (2021). The antimicrobial activity and biocompatibility of a controlled gentamicin-releasing single-layer sol-gel coating on hydroxyapatite-coated titanium. The Bone & Joint Journal, 103-B (3), 522-529. [Article]

HERRERO‐HERNANDEZ, Eliseo, GREENFIELD, David, SMITH, Thomas and AKID, Robert (2019). Evaluation of the performance of a mediatorless microbial fuel cell by electrochemical impedance spectroscopy. Electroanalysis. [Article]

MAY, M, WANG, Heming and AKID, Robert (2016). Influence of adding multiwalled carbon nanotubes on the adhesive strength of composite epoxy/sol–gel materials. Journal of Coatings Technology and Research, 13 (2), 325-332. [Article]

EDUOK, Ubong, SULEIMAN, Rami, GITTENS, Jeanette, KHALED, Mazen, SMITH, Thomas J., AKID, Robert, EL ALI, Bassam and KHALIL, Amjad (2015). Anticorrosion/antifouling properties of bacterial spore-loaded sol-gel type coating for mild steel in saline marine condition: a case of thermophilic strain of Bacillus licheniformis. RSC Advances, 5 (114), 93818-93830. [Article]

MAY, Mousa, WANG, Heming and AKID, Robert (2013). Bond strength of hybrid sol–gel coatings with different additives. Journal of Coatings Technology and Research, 10 (3), 407-413. [Article]

GITTENS, Jeanette E., SMITH, Thomas J., SULEIMAN, Rami and AKID, Robert (2013). Current and emerging environmentally-friendly systems for fouling control in the marine environment. Biotechnology Advances, 31 (8), 1738-1753. [Article]

HERRERO-HERNANDEZ, E, SMITH, Thomas and AKID, Robert (2013). Electricity generation from wastewaters with starch as carbon source using a mediatorless microbial fuel cell. Biosensors and Bioelectronics, 39 (1), 194-198. [Article]

LEIVA-GARCÍA, R., AKID, Robert, GREENFIELD, David, GITTENS, Jeanette, MUÑOZ-PORTERO, M.J. and GARCÍA-ANTÓN, J. (2012). Study of the sensitisation of a highly alloyed austenitic stainless steel, Alloy 926 (UNS N08926), by means of scanning electrochemical microscopy. Electrochimica Acta, 70, 105-111. [Article]

DODDS, Stephen, SMITH, Thomas Smith, AKID, Robert, STEPHENSON, J, NICHOL, Tim, BANERJEE, RD, STOCKLEY, I and TOWNSEND, R (2011). Contrasting effects of physical wear on elution of two antibiotics from orthopaedic cement. Antimicrobial Agents and Chemotherapy, 56 (3), 1471-1475. [Article]

MAY, M., WANG, Heming and AKID, Robert (2010). Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol–gel epoxy system. International Journal of Adhesion and Adhesives, 30 (6), p. 505. [Article]

LI, Shu-Xin, LI, Lei, YU, Shu-Rong, AKID, Robert and XIA, Hong-Bo (2010). Investigation of intergranular corrosion of 316L stainless steel diffusion bonded joint by electrochemical potentiokinetic reactivation. Corrosion Science. [Article]

AKID, Robert, DMYTRAKH, I. M. and GONZALEZ-SANCHEZ, J. (2006). Fatigue damage accumulation: the role of corrosion on the early stages of crack development. Corrosion engineering science and technology, 41 (4), 328-335. [Article]

AKID, Robert, HOVSEPIAN, Papken and KOK, Y. N. (2005). Tribocorrosion testing of stainless steel (SS) and PVD coated SS using a modified scanning reference electrode technique. Wear, 259 (7-12), 1472-1481. [Article]

AKID, Robert and GARMA, M. (2004). Scanning vibrating reference electrode technique: a calibration study to evaluate the optimum operating parameters for maximum signal detection of point source activity. Electrochimica acta, 49 (17-18), 2871-2879. [Article]

AKID, Robert and MILLS, D. J. (2001). A comparison between conventional macroscopic and novel microscopic scanning electrochemical methods to evaluate galvanic corrosion. Corrosion science, 43 (7), 1203-1216. [Article]