Items where Type is Book Section

ARAUJO, Duarte, DAVIDS, Keith, BENNETT, Simon J, BUTTON, Chris and CHAPMAN, Graham (2004). Emergence of sport skills under constraints. In: WILLIAMS, A Mark and HODGES, Nicola J, (eds.) Skill acquisition in sport : research, theory and practice. Routledge, 409-433. [Book Section]

ASAI, T., TAKANO, S., CARRE, M. J. and HAAKE, Steve (2004). A fundamental study of an infront curve kick in football. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sports engineering assocation, 183-192. [Book Section]

ATKINSON, Paul (2004). Post-industrial manufacturing systems : the impact of emerging technologies on design, craft and engineering processes. In: BURNETT, Gordon, (ed.) Challenging craft : International Conference 8-10 Sept. 2004. Aberdeen, Scotland, Gray's School of Art, Robert Gordon University. [Book Section]

ATKINSON, Paul and HALES, Derek (2004). Chance would be a fine thing : digitally driven practice-based research at Huddersfield. In: HARRIS, Jane and PRESS, Mike, (eds.) Proceedings of Pixelraiders2 Conference. Sheffield, Sheffield Hallam University. [Book Section]

ATKINSON, Paul, UNVER, Ertu and DEAN, Lionel, T. (2004). ‘Future Factories’: supportive technologies as creative processes. In: MARJANOVIC,, D, (ed.) Proceedings of the Design 2004 8th International Design Conference. Dubrovnik, Croatia, The Design Society, 99-104. [Book Section]

BRAMWELL, B. (2004). Intervention and policy instruments for sustainable tourism. In: THEOBALD, W. F., (ed.) Global tourism. London, Butterworth-Heinemann, 406-425. [Book Section]

BRAMWELL, B. (2004). Mass tourism, diversification and sustainability in southern Europe's coastal regions. In: BRAMWELL, B., (ed.) Coastal mass tourism. Diversification and sustainable development in southern Europe. Aspects of tourism . Clevedon, Channel View, 1-31. [Book Section]

BRAMWELL, B. (2004). Partnerships, participation, and social science research in tourism planning. In: LEW, A. A., HALL, C. M. and WILLIAMS, A. M., (eds.) A companion to tourism. Oxford, Blackwell, 541-554. [Book Section]

BRAMWELL, B. (2004). The policy context for tourism and sustainability in southern Europe’s coastal regions. In: BRAMWELL, B., (ed.) Coastal mass tourism. Diversification and sustainable development in southern Europe. Aspects of tourism . Clevedon, Channel View, 32-47. [Book Section]

BUFTON, S. (2004). Social class. In: TAYLOR, G. and SPENCER, S., (eds.) Social identities: multidisciplinary approaches. London, Routledge, 14-34. [Book Section]

BUTTON, C and DAVIDS, K (2004). Acoustic information for timing. In: HECHT, H and SAVELSBERGH, G J P, (eds.) Time-to-Contact. Advances in psychology (135). Elsevier, 355-369. [Book Section]

CARRE, M. J., DODD, D., SENIOR, T. and HAAKE, S. J. (2004). A system for predicting the impact between a ball and a sports surface. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sport engineering association, 45-51. [Book Section]

CARRE, M. J., GOODWILL, S. R. and HAAKE, Steve (2004). Understanding the aerodynamics of a spinning soccer ball. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sports engineering assocation, 70-76. [Book Section]

CLARK, Tony, EVANS, Andy, SAMMUT, Paul and WILLANS, James (2004). An eXecutable metamodelling facility for domain specific language design. In: TOLVANEN, J. -P., SPRINKLE, J. and ROSSI, M., (eds.) Proceedings of the 4th OOPSLA Workshop on DomainSpecific Modeling, (DSM’04). Computer Science and Information System Reports, Technical Reports (TR-33). Finland, DSM Forum / University of Jyväskylä. [Book Section]

COCKERHAM, Graham (2004). A methodology for project-based learning with ETO product development. In: SAAD, Sameh Monier I. and PERERA, T., (eds.) Advances in manufacturing technology : proceedings of the Second International Conference on Manufacturing Research, ICMR2004, incorporating the Twentieth National Conference on Manufacturing Research. Sheffield, Sheffield Hallam University, 465-470. [Book Section]

COTTON, T. and HARDY, T. (2004). Problematising culture and discourse for mathematics education research: defining the issues; tools for research. In: ZEVENBERGEN, R. and VALERO, P., (eds.) Researching the socio-political dimensions of mathematics education. Issues of power in theory and methodology. Netherlands, Kluwer, 85-103. [Book Section]

DIGNALL, R. J., GOODWILL, S. R. and HAAKE, Steve (2004). Tennis GUT – modelling the game. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sports engineering assocation, 382-388. [Book Section]

DOMDOUZIS, Konstantinos, ANUMBA, C.J. and THORPE, A. (2004). Wireless Sensor Networking in the Construction Industry - Prospects and Problems. In: KHOSROWSHAHI, F., (ed.) Proceedings 20th Annual ARCOM Conference. ARCOM, 1107-1120. [Book Section]

FERRIS, Kieran, BANNON, Liam, CIOLFI, Luigina, GALLAGHER, Paul, HALL, Tony and LENNON, Marilyn (2004). Shaping experiences in the Hunt Museum: a design case study. In: DIS '04 Proceedings of the 5th conference on Designing interactive systems: processes, practices, methods, and techniques. ACM, 205-214. [Book Section]

FLYNN, M., GRANT, G. and RAMCHARAN, P. (2004). Emancipatory and participatory research: how far have we come? In: EMERSON, E., (ed.) The international handbook of applied research in intellectual disabilities. London, Wiley, 83-111. [Book Section]

GEORGALAS, Nektarios, AZMOODEH, Manooch, CLARK, Tony, EVANS, Andy, SAMMUT, Paul and WILLANS, James (2004). MDA-driven development of standard-compliant OSS components: the OSS/J inventory case-study. In: AKEHURST, D.H., (ed.) Second European Workshop on Model Driven Architecture (MDA) with an emphasis on methodologies and transformations, September 7th-8th 2004, Canterbury, UK, Proceedings. Technical report (17-04). Kent, Computing Laboratory, University of Kent, 44-60. [Book Section]

GOODWILL, S. R. and HAAKE, Steve (2004). Aerodynamics of tennis balls - effect of wear. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sports engineering assocation, 35-41. [Book Section]

GOODWILL, S. R. and HAAKE, Steve (2004). Effect of string tension on the impact between a tennis ball and racket. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sports engineering assocation, 3-9. [Book Section]

HAAKE, Steve, CARRE, M. J., KIRK, R. F. and SENIOR, T. (2004). Traction of studded boots on turf. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sport engineering association, 544-551. [Book Section]

HAMILTON, N. D. R., SENIOR, T. and HAAKE, Steve (2004). The rolling resistance of wheelchairs. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sport engineering association, 117-122. [Book Section]

HARDY, T. (2004). "There's no hiding place": using Foucault's notion of normalisation at work in a mathematics lesson. In: WALSHAW, M., (ed.) Mathematics Education within the Postmodern. Greenwich, Information Age Publishing, 103-119. [Book Section]

HART, J., CURTIS, D., HAMILTON, N. D. R. and HAAKE, Steve (2004). Scanning large geometries for use in computational fluid dynamic analysis. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sport engineering association, 601-607. [Book Section]

HASHIM, A. A., RAY, A. K., BARRATT, D. S. and HASSAN, A. K. (2004). The effect of the high and low activation temperature on the conduction of thermionic oxide cathodes for CRT applications. In: International Vacuum Microelectronics Conference. Technical Digest of the 17th International Vacuum Nanoelectronics Conference . Piscataway, N.J., IEEE, 46-47. [Book Section]

HELLER, B., HAAKE, Steve and KIRTLEY, C. (2004). An instrumented insole for measurement of foot motion. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sport engineering association, 201-206. [Book Section]

HOY, R., VAN ESSEN, P., KAMMINGA, J. D., JANSSEN, G. C. A. M. and EHIASARIAN, Arutiun (2004). Scratch test measurements on CrNx coatings. In: COCORAN, Sean G., JOO, Y.-C., MOODY, N.R. and SUO, Z., (eds.) Thin Films: Stresses and Mechanical Properties X ; proceedings. Materials Research Society symposium proceedings (795). Materials Research Society, 491-496. [Book Section]

HUTTON, Jenny and WALLACE, Jayne (2004). Making Sense : Using an experimental tool to explore the communication of jewellery published in Design and Emotion the Experience of Everyday Things. Edited by Deana Mc Donagh, Paul hekkert, Jeroen Van Erp, Diane Gyi. In: MCDONAGH, Deana, HEKKERT, Paul, VAN ERP, Jeroen and GYI, Diane, (eds.) Design and Emotion : the experience of everyday things. London and New York, Taylor and Francis, 144-149. [Book Section]

JAMES, D., CARRE, M. J. and HAAKE, Steve (2004). The normal impact of a cricket ball on a cricket pitch. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sport engineering association, 66-72. [Book Section]

LUKES, R. A., CHIN, S. B., HART, J. H. and HAAKE, Steve (2004). The aerodynamics of mountain bicycles: the role of computational fluid dynamics. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sport engineering association, 104-110. [Book Section]

MACDONALD, R. (2004). Researching the student experience to bring about improvements in problem-based learning. In: BADEN-SAVEN, M. and WILKIE, K., (eds.) Challenging research in problem-based learning. Maidenhead, Open University Press, 37-49. [Book Section]

MCHUTCHON, M. A., CURTIS, D. and CARRE, M. J. (2004). Parametric design of field hockey sticks. In: HUBBARD, M., MEHTA, R. D. and PALLIS, J. M., (eds.) The engineering of sport 5. International sport engineering association, 284-290. [Book Section]

MERCHANT, Guy (2004). Barbie meets Bob the Builder at the Workstation: young children and digital writing. In: MARSH, Jackie, (ed.) Popular culture, new media and digital literacy in early childhood. Abingdon, RoutledgeFalmer, 183-200. [Book Section]

MERCHANT, Guy (2004). What's your a/s/l? Electronic communication and synchronous chat. In: MONTEITH, Moira, (ed.) Teaching secondary school literacies with ICT. Buckingham, Open University, 133-149. [Book Section]

PEREIRA, Mauro, HEALY, S.B. and O'REILLY, E.P. (2004). Microscopic theory for interband and intersubband optical responses of quantum well laser media. In: Proceedings of the 4th International Conference on Numerical Simulation of Optoelectronic Devices, 2004. NUSOD '04. IEEE, 5-6. [Book Section]

PEREIRA, Mauro, HEALY, S.B. and O'REILLY, E.P. (2004). Microscopic theory for interband and intersubband optical responses of quantum well laser media. In: Numerical Simulation of Optoelectronic Devices, 2004. NUSOD '04. Proceedings of the 4th International Conference on. IEEE, 5-6. [Book Section]

PEREIRA, Mauro, LEE, S.-C. and WACKER, A. (2004). Nonequilibrium and many body effects in the realistic simulation of intersubband emitters. In: Proceedings of the 4th International Conference on Numerical Simulation of Optoelectronic Devices, 2004. NUSOD '04. IEEE, 94-96. [Book Section]

PEREIRA, Mauro, LEE, S.C. and WACKER, A. (2004). Green's functions theory for quantum cascade lasers. In: 12th International Symposium nanostructures: physics and technology. St. Petersburg, Ioffe Physico-Technical Institute, 83-84. [Book Section]

POLLARD, Nicholas (2004). Notes towards an approach for the therapeutic use of creative writing in occupational therapy. In: SAMPSON, Fiona, (ed.) Creative writing in health and social care. London, Jessica Kingsley, 189-206. [Book Section]

REDMAN, Judy (2004). Historical analysis. In: BASSETT, Christopher, (ed.) Qualitative research in health care. London, Whurr, 178-196. [Book Section]

SIMON, Matthew (2004). Decision-making in product life cycle information networks. In: SAAD, Sameh and PERERA, Terrence, (eds.) Advances in manufacturing technology. Sheffield, Sheffield Hallam University. [Book Section]

SIMON, Matthew (2004). Product life cycle modelling. In: SAAD, Sameh and PERERA, Terrence, (eds.) Advances in manufacturing technology. Sheffield, Sheffield Hallam University. [Book Section]

TEKINER, F., GHASSEMLOOY, Z., AL-KHAYATT, S. and THOMPSON, M. (2004). Implementation and evaluation of Shufflenet, Gemnet and De Bruijn graph logical network topologies. In: HAMZA, M. H., (ed.) Proceedings of the IASTED International Conference Parallel and Distributed Computing and Networks. Acta Press. [Book Section]

TITTAGALA, Sunil (2004). Teaching Manufacturing Technology Effectively in a Diversifying Mechanical Engineering Curriculum. In: Transactions of the Institution of Engineers. Institution of Engineers Sri Lanka, 389-397. [Book Section]

XU, H., AKID, R., BRUMPTON, G., WANG, H. and RODENBURG, J. M. (2004). Electrochemical and AFM/SEM studies of Ni-Cr electroplated and sol-gel coated samples. In: MCVITIE, S. and MCCOMB, D., (eds.) Electron Microscopy and Analysis 2003. Institute of Physics Conference Series (179). CRC Press, 417-420. [Book Section]

ZHOU, Z., RAINFORTH, W. M., HOVSEPIAN, P. E. and MUNZ, W. D. (2004). Oxidation of nanoscale TiAIN/VN multilayer coatings. In: MCVITIE, S. and MCCOMB, D., (eds.) Electron Microscopy and Analysis 2003. Institute of Physics Conference Series (179). Institute of Physics, 413-416. [Book Section]