Items where Author is "Kyaw, Si"
Number of items: 12.
ROUSE, J.P, ZACHARZEWSKI, P, HYDE, C.J, JEFFERSON-LOVEDAY, R, MORRIS, A and KYAW, Si
(2018).
A case study investigation into the effects of spatially dependent convection coefficients on the fatigue response of a power plant header component.
International Journal of Fatigue, 113, 137-148.
HASHIM, Atheer, KYAW, Si and SUN, Wei
(2017).
Modelling fracture of aged graphite bricks under radiation and temperature.
Nuclear Materials and Energy, 11, 3-11.
KYAW, Si, JONES, Arthur, JEPSON, Mark A.E., HYDE, Tom and THOMSON, Rachel C.
(2017).
Effects of three-dimensional coating interfaces on thermo-mechanical stresses within plasma spray thermal barrier coatings.
Materials & Design, 125 (5), 189-204.
KYAW, Si, ROUSE, James P, LU, Jiawa and SUN, Wei
(2016).
Determination of material parameters for a unified viscoplasticity-damage model for a P91 power plant steel.
International Journal of Mechanical Sciences, 115-6, 168-179.
KYAW, Si, ROUSE, J P, LU, J and SUN, W
(2016).
Effects of surface roughness on thermo-mechanical fatigue life of a P91 power plant steel.
Procedia Structural Integrity, 2, 664-672.
KARUNARATNE, M. S. A., KYAW, Si, JONES, A., MORRELL, R. and THOMSON, R. C.
(2016).
Modelling the coefficient of thermal expansion in Ni-based superalloys and bond coatings.
Journal of Materials Science, 51 (9), 4213-4226.
KYAW, Si, JONES, I A and HYDE, T H
(2016).
Simulation of failure of air plasma sprayed thermal barrier coating due to interfacial and bulk cracks using surface-based cohesive interaction and extended finite element method.
Journal of Strain Analysis for Engineering Design, 51 (2), 132-143.
KYAW, Si, SUN, W and BECKER, A.A
(2015).
Effects of compositions of filler, binder and porosity on elastic and fracture properties of nuclear graphite.
Journal of Nuclear Materials, 457, 42-47.
WADSWORTH, M., KYAW, Si and SUN, W.
(2014).
Finite element modelling of the effect of temperature and neutron dose on the fracture behaviour of nuclear reactor graphite bricks.
Nuclear Engineering and Design, 280, 1-7.
LIU, D., KYAW, Si, FLEWITT, P.E.J., SERAFFON, M., SIMMS, N.J., PAVIER, M. and JONES, I.A.
(2014).
Residual stresses in environmental and thermal barrier coatings on curved superalloy substrates: Experimental measurements and modelling.
Materials Science and Engineering: A, 606, 117-126.
LI, S, KYAW, Si and JONES, A
(2014).
Boundary conditions resulting from cylindrical and longitudinal periodicities.
Computers & Structures, 133, 122-130.
KYAW, Si, JONES, Arthur and HYDE, Tom
(2013).
Predicting failure within TBC system: Finite element simulation of stress within TBC system as affected by sintering of APS TBC, geometry of substrate and creep of TGO.
Engineering Failure Analysis, 27, 150-164.