2D and 3D separation of stresses using automated photoelasticity

HAAKE, Steve, PATTERSON, E. A. and WANG, Z. F. (1996). 2D and 3D separation of stresses using automated photoelasticity. Experimental mechanics, 36 (3), 269-276.

Full text not available from this repository.

Abstract

A procedure for the separation of full-field photoelastic images for use with an automated polariscope is described. Regions of background in the image are identified thus producing the boundary of the model. The shear difference method is used to calculate the components of stress along all raster lines in the image using photoelastic parameters at the boundary points to calculate the initial values of stress. Algorithms were also used to evaluate the stress components along raster lines which did not contain boundary points. A plastic template was used to evaluate the efficiency of the boundary routine. It was found that it was able to identify edges to within approximately one pixel on screen. The complete procedure for stress separation was evaluated using a stress frozen disc in compression and a turbine slot. The values of stress found using the automated polariscope with the stress-separation procedure were found to agree well with theory and with results determined using the method of Tardy compensation and manual analysis. The automated polariscope was also used to analyze three-dimensional stress components along arbitrary lines of a 3D model. A two-model slicing regime was used to analyze a strut subjected to a vertical load. This work was compared to results obtained by Frocht and Guernsey on an identical model machined from Fosterite and subjected to a higher load. Good agreement was found between the results for points away from the region of loading. Significant differences were found near to the load point, however. A finite element analysis of the same problem suggested that this was due to the effects of plasticity.

Item Type:	Article
Research Institute, Centre or Group - Does NOT include content added after October 2018:	Centre for Sports Engineering Research
Identification Number:	https://doi.org/10.1007/BF02318018
Page Range:	269-276
Depositing User:	Carole Harris
Date Deposited:	25 Jun 2010 13:20
Last Modified:	18 Mar 2021 11:00
URI:	https://shura.shu.ac.uk/id/eprint/2183

Actions (login required)

View Item

Downloads

Publication Metrics