Design, development and testing of shape shifting wing model

NINIAN, Dean and DAKKA, Sam (2017). Design, development and testing of shape shifting wing model. Aeropsace, 4 (4), p. 52.

Preview

PDF morphing.pdf - Published Version Creative Commons Attribution. Download (9MB) | Preview

Abstract

The design and development of morphing (shape shifting) aircraft wings—an innovative technology that has the potential to increase the aerodynamic efficiency and reduce noise signatures of aircrafts—was carried out. This research was focused on reducing lift-induced drag at the flaps of the aerofoil and to improve the design to achieve the optimum aerodynamic efficiency. Simulation revealed a 10.8% coefficient of lift increase for the initial morphing wing and 15.4% for the optimized morphing wing as compared to conventional wing design. At angles of attack of 0, 5, 10 and 15 degrees, the optimized wing has an increase in lift-to-drag ratio of 18.3%, 10.5%, 10.6% and 4% respectively when compared with the conventional wing. Simulations also showed that there is a significant improvement on pressure distribution over the lower surface of the morphing wing aerofoil. The increase in flow smoothness and reduction in vortex size reduced pressure drag along the trailing edge of the wing as a result an increase in pressure on the lower surface was experienced. A morphing wing reduced the size of the vortices and therefore the noise levels measured were reduced by up to 50%.

Item Type:	Article
Departments - Does NOT include content added after October 2018:	Faculty of Science, Technology and Arts > Department of Engineering and Mathematics
Identification Number:	https://doi.org/10.3390/aerospace4040052
Page Range:	p. 52
Depositing User:	Sam Dakka
Date Deposited:	02 Jan 2018 14:43
Last Modified:	18 Mar 2021 01:06
URI:	https://shura.shu.ac.uk/id/eprint/17808

Actions (login required)

View Item

Downloads

Publication Metrics