Items where Author is "Akid, R."
Jump to: Article | Book Section
Number of items: 32.
Article
PAKIET, M., KOWALCZYK, I., LEIVA GARCIA, R., MOORCROFT, R., NICHOL, Tim, SMITH, Thomas, AKID, R. and BRYCKI, B.
(2019).
Gemini surfactant as multifunctional corrosion and biocorrosion inhibitors for mild steel.
Bioelectrochemistry, 128, 252-262.
FATOBA, O.O., LEIVA-GARCIA, R., LISHCHUK, Sergey, LARROSA, N.O. and AKID, R.
(2018).
Simulation of stress-assisted localised corrosion using a Cellular Automaton Finite Element approach.
Corrosion Science, 137, 83-97.
SULEIMAN, R, KHALED, M, WANG, H., SMITH, T. J., GITTENS, J, AKID, R., MOHAMED EL ALI, B and KHALIL, A
(2014).
Comparison of selected inhibitor doped sol–gel coating systems for protection of mild steel.
Corrosion engineering science and technology, 49 (3), 189-196.
AKID, R., GOBARA, M. and WANG, H.
(2011).
Corrosion protection performance of novel hybrid polyaniline/sol–gel coatings on an aluminium 2024 alloy in neutral, alkaline and acidic solutions.
Electrochimica Acta, 56 (5), 2483-2492.
LISHCHUK, Sergey, AKID, R., WORDEN, K. and MICHALSKI, J.
(2011).
A cellular automaton model for predicting intergranular corrosion.
Corrosion Science, 53 (8), 2518-2526.
LEWIS, O. D., GREENFIELD, D., AKID, R., DAHM, R. H. and WILCOX, G. D.
(2010).
Conversion coatings for zinc electrodeposits from modified molybdate solutions.
Transactions of the Institute of Metal Finishing, 88 (2), 107-116.
WANG, H., AKID, R. and GOBARA, M.
(2010).
Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route.
Corrosion Science, 52 (8), 2565-2570.
GITTENS, J. E., WANG, H., SMITH, T. J., AKID, R. and GREENFIELD, D.
(2009).
Biotic sol-gel coating for the inhibition of corrosion in seawater.
ECS transactions, 24 (1), 211-229.
AKID, R., WANG, H., SMITH, T. J., GREENFIELD, D. and EARTHMAN, J. C.
(2008).
Biological functionalization of a sol-gel coating for the mitigation of microbial-induced corrosion.
Advanced functional materials, 18 (2), 203-211.
WANG, H. and AKID, R.
(2008).
Encapsulated cerium nitrate inhibitors to provide high-performance anti-corrosion sol-gel coatings on mild steel.
Corrosion Science, 50 (4), 1142-1148.
LISHCHUK, S. V., AKID, R. and WORDEN, K.
(2008).
Model-based prognosis for intergranular corrosion.
Proc. 4th European Workshop on Structural Health Monitoring, Krakow, Poland, 340-348.
KRAWIEC, H., VIGNAL, V. and AKID, R.
(2008).
Numerical modelling of the electrochemical behaviour of 316 stainless steel based upon static and dynamic experimental microcapillary-based techniques: effect of electrolyte flow and capillary size.
Surface and Interface Analysis, 40 (3-4), 315-319.
KRAWIEC, H., VIGNAL, V. and AKID, R.
(2008).
Numerical modelling of the electrochemical behaviour of 316L stainless steel based upon static and dynamic experimental microcapillary-based techniques.
Electrochimica Acta, 53 (16), 5252-5259.
AKID, R. and WANG, H.
(2008).
Protective developments - Sol-gel systems show promise in antifouling and anticorrosive systems.
European Coatings Journal, 5, 24-28.
LARROUMET, D., GREENFIELD, D., AKID, R. and YARWOOD, J.
(2008).
Spectroscopic studies of the corrosion of model iron electrodes in carbonate and phosphate buffer solutions.
Journal of Raman Spectroscopy, 39 (12), 1740-1748.
LISHCHUK, S. V., AKID, R. and WORDEN, K.
(2008).
A cellular automaton based model for predicting intergranular corrosion in aerospace alloys.
Proc. EUROCORR–2008, Edinburgh, UK.
WANG, H. and AKID, R.
(2007).
A room temperature cured sol-gel anticorrosion pre-treatment for Al 2024-T3 alloys.
Corrosion science, 49 (12), 4491-4503.
AKID, R.
(2007).
Hybrid sol gel coatings are customized to fight corrosion.
Materials performance, 46 (11), 14-15.
LARROUMET, D., GREENFIELD, D., AKID, R. and YARWOOD, J.
(2007).
Raman spectroscopic studies of the corrosion of model iron electrodes in sodium chloride solution.
Journal of Raman Spectroscopy, 38 (12), 1577-1585.
AKID, R. and WANG, H.
(2006).
Application of sol-gel technology for anticorrosion coatings and surface pretreatments.
Galvanotechnik, 97 (9), 2098-2109.
LEWIS, O. D., GREENFIELD, D., AKID, R., DAHM, R. H. and WILCOX, G. W.
(2006).
SVET investigation into use of simple molybdate passivation treatments on electrodeposited zinc coatings.
Transactions of the Institute of Metal Finishing, 84 (4), 188-195.
AKID, R. and WANG, H.
(2006).
Sol-gel coatings: an alternative corrosion protection system.
Corrosion Management (May/Ju), 9-12.
SCHMITT, C., PLUVINAGE, G., HADJ-TAIEB, E. and AKID, R.
(2006).
Water pipeline failure due to water hammer effects.
Fatigue and fracture of engineering materials and structures, 29 (12), 1075-1082.
PETROYIANNIS, P. V., KERMANIDIS, A. T., AKID, R., RODOPOULOS, C. A. and PANTELAKIS, S. G.
(2005).
Analysis of the effects of exfoliation corrosion on the fatigue behaviour of the 2024-T351 aluminium alloy using the fatigue damage map.
International Journal of Fatigue, 27 (7), 817-827.
XU, H., AKID, R. and BRUMPTON, G.
(2004).
Surface characterisation studies of CrVI and CrIII electroplated carbon steel samples.
Transactions of the Institute of Metal Finishing, 82, 18-23.
HU, H. and AKID, R.
(2001).
Cathodic-polarization effects on the long/short corrosion-fatigue crack growth rate of an offshore steel.
Materials science, 37 (6), 902-909.
MURTAZA, G. and AKID, R.
(2000).
Empirical corrosion fatigue life prediction models of a high strength steel.
Engineering Fracture Mechanics, 67 (5), 461-474.
BREEN, C., AKID, R., HABESCH, S. and SAMMON, C.
(2000).
How clean is clean?
Materials World, 8 (4), 15-17.
WANG, Y. Z., ATKINSON, J., AKID, R. and PARKINS, R. N.
(1996).
Crack interaction, coalescence and mixed mode fracture mechanics.
Fatigue & Fracture Of Engineering Materials And Structures, 19 (1), 51-63.
WANG, Y. Z., AKID, R., CLARKE, A. and ATKINSON, J. D.
(1996).
Further observations of early fatigue crack development.
Fatigue and fracture of engineering materials and structures, 19 (5), 623-627.
Book Section
AKID, R., LISHCHUK, Sergey, WORDEN, K., BALKOWIEC, A., MICHALSKI, J. and KURZYDLOWSKI, K. J.
(2012).
Modelling of the aluminium alloy Al 2024 from the microscale to the macroscale: intergranular corrosion.
In: DEROSE, J. A., SUTER, T., HACK, T. and ADEY, R., (eds.)
Aluminium Alloy Corrosion of Aircraft Structures : Modelling and Simulation.
WIT Transactions on State-of-the-art in Science and Engineering
(61).
WIT press, 59-76.
XU, H., AKID, R., BRUMPTON, G., WANG, H. and RODENBURG, J. M.
(2004).
Electrochemical and AFM/SEM studies of Ni-Cr electroplated and sol-gel coated samples.
In: MCVITIE, S. and MCCOMB, D., (eds.)
Electron Microscopy and Analysis 2003.
Institute of Physics Conference Series
(179).
CRC Press, 417-420.