Items where Author is "Purandare, Yashodhan"

BILYA, Musa, NABOK, Aleksey, PURANDARE, Yashodhan, ALAM, Ashfaque E. and DHARMADASA, I (2024). Growth and Characterization of p-Type and n-Type Sb2Se3 for Use in Thin-Film Photovoltaic Solar Cell Devices. Energies, 17 (2): 406. [Article]

CHOUHAN, Jitendra, PURANDARE, Yashodhan, JANA, Buddhadev, DEY, A., HOVSEPIAN, Papken, JENKINS, D. and JONES, L. (2023). Investigation of aqueous slurry erosion-corrosion behaviour of Tantalum in different pH solutions. International Journal of Refractory Metals and Hard Materials, 117: 106427. [Article]

HOVSEPIAN, P., SHUKLA, K., SUGUMARAN, A., PURANDARE, Yashodhan, KHAN, I. and EHIASARIAN, A. (2022). A novel plasma nitriding process utilising HIPIMS discharge for enhanced tribological and barrier properties of medical grade alloy surfaces. Materials Letters, 313. [Article]

SHUKLA, Krishnanand, PURANDARE, Yashodhan, SUGUMARAN, Arunprabhu, LOCH, Daniel, EHIASARIAN, Arutiun, KHAN, Imran and HOVSEPIAN, Papken (2021). A new approach towards performing plasma nitriding of CrCoMo medical grade alloys using HIPIMS discharge. 64th Annual Technical Conference Proceedings. [Article]

ARUNACHALAM SUGUMARAN, Arunprabhu, PURANDARE, Yashodhan, SHUKLA, Krishnanand, KHAN, Imran, EHIASARIAN, Arutiun and HOVSEPIAN, Papken (2021). TiN/NbN nanoscale multilayer coatings deposited by High Power Impulse Magnetron Sputtering to protect medical grade CoCrMo alloys. Coatings, 11 (7). [Article]

SHUKLA, Krishnanand, PURANDARE, Yashodhan, SUGUMARAN, Arunprabhu, EHIASARIAN, Arutiun, KHAN, Imran and HOVSEPIAN, Papken (2021). Correlation between the microstructure and corrosion performance of the HIPIMS nitrided bio-grade CoCrMo alloy. Journal of Alloys and Compounds, 879, p. 160429. [Article]

EHIASARIAN, Arutiun, PURANDARE, Yashodhan, SUGUMARAN, Arunprabhu, HOVSEPIAN, Papken, HATTO, Peter and DEBACKER, Jeroen (2021). Improving the Quality of Friction Stir Welds in Aluminium Alloys. Coatings, 11 (5). [Article]

SHUKLA, Krishnanand, PURANDARE, Yashodhan, LOCH, Daniel, SUGUMARAN, Arrunprabhu, KAHN, Imran, EHIASARIAN, Arutiun and HOVSEPIAN, Papken (2020). Low-Pressure Plasma Nitriding Of Medical Grade Alloy Using HIPIMS Discharge. In: I2RI Winter Poster Session, Virtual, 09 December 2020. (Unpublished) [Conference or Workshop Item]

SHUKLA, Krishnanand, PURANDARE, Yashodhan, KHAN, Imran, EHIASARIAN, Arutiun and HOVSEPIAN, Papken (2020). Effect of Nitriding Voltage on the Impact Load Fatigue and Fracture Toughness Behaviour of CoCrMo Alloy Nitrided Utilising a HIPIMS Discharge. Surface and Coatings Technology, 400, p. 126227. [Article]

PURANDARE, Yashodhan, ROBINSON, G.L., EHIASARIAN, A.P. and HOVSEPIAN, P. Eh (2020). Investigation of High Power Impulse Magnetron Sputtering deposited nanoscale CrN/NbN multilayer coating for tribocorrosion resistance. Wear, p. 203312. [Article]

MA, Dina, HARVEY, Terry, WELLMAN, Richard, EHIASARIAN, Arutiun, HOVSEPIAN, Papken, ARUNPRABHU, Sugumaran, PURANDARE, Yashodhan and WOOD, Robert (2019). Cavitation erosion performance of CrAlYN/CrN nanoscale multilayer coatings deposited on Ti6Al4V by HIPIMS. Journal of Alloys and Compounds, 788, 719-728. [Article]

BISWAS, Barnali, PURANDARE, Yashodhan, KHAN, Imran and HOVSEPIAN, Papken (2018). Effect of substrate bias voltage on defect generation and their influence on corrosion and tribological properties of HIPIMS deposited CrN/NbN coatings. Surface and Coatings Technology, 344, 383-393. [Article]

HOVSEPIAN, Papken, EHIASARIAN, Arutiun, PURANDARE, Yashodhan, MAYR, Peter, ABSTOSS, Kevin, MOSQUERAFEIJOO, Maria, SCHULZ, Wencke, KRANZMANN, Axel, LASANTA, Maria and TRUJILLO, Javier (2018). Novel HIPIMS deposited nanostructured CrN/NbN coatings for environmental protection of steam turbine components. Journal of Alloys and Compounds, 746, 583-593. [Article]

AGUERO, A, LORENZA, M.Juez, HOVSEPIAN, Papken, EHIASARIAN, Arutiun, PURANDARE, Yashodhan and MUELAS, R (2018). Long-term behaviour of Nb and Cr nitrides nanostructured coatings under steam at 650°C. Mechanistic considerations. Journal of Alloys and Compounds, 739, 549-558. [Article]

BISWAS, Barnali, PURANDARE, Yashodhan, ARUNACHALAMSUGUMARAN, Arunprabhu, KHAN, Imran and HOVSEPIAN, Papken (2018). Effect of chamber pressure on defect generation and their influence on corrosion and tribological properties of HIPIMS deposited CrN/NbN Coatings. Surface and Coatings Technology, 336, 84-91. [Article]

BISWAS, Barnali, PURANDARE, Yashodhan, ARUNACHALAMSUGUMARAN, Arunprabhu, LOCH, Daniel, CREASY, Stuart, KHAN, Imran, EHIASARIAN, Arutiun and HOVSEPIAN, Papken (2017). Defect growth in multilayer chromium nitride/niobium nitride coatings produced by combined high power impulse magnetron sputtering and unbalance magnetron sputtering technique. Thin Solid Films, 636, 558-566. [Article]

ARUNACHALAMSUGUMARAN, Arunprabhu, PURANDARE, Yashodhan, EHIASARIAN, Arutiun and HOVSEPIAN, Papken (2017). Corrosion behaviour of post-deposition polished droplets-embedded arc evaporated and droplets-free HIPIMS/DCMS coatings. Corrosion, 73, 685-693. [Article]

ILLANA, Andrea, MATO, Sonia, EHIASARIAN, Arutiun, PURANDARE, Yashodhan, LASANTA, Maria, MIGUEL, Maria, HOVSEPIAN, Papken and TRUJILLO, Francisco (2017). Substrate finishing and niobium content effects on the high temperature corrosion resistance in steam atmosphere of CrN/NbN superlattice coatings deposited by PVD-HIPIMS. Oxidation of Metals, 87 (3-4), 455-467. [Article]

EHIASARIAN HOVSEPIAN, Papken, PAPKEN EHIASARIAN, Arutiun, PURANDARE, Yashodhan, ARUNACHALAM SUGUMARAN, Arunprabhu, MARRIOTT, Tim and KHAN, Imran (2016). Development of superlattice CrNNbN coatings for joint replacements deposited by High Power Impulse Magnetron Sputtering. Journal of Materials Science: Materials in Medicine, 27 (9). [Article]

HOVSEPIAN, Papken, EHIASARIAN, Arutiun, PURANDARE, Yashodhan, BISWAS, Barnali, PEREZ, Francisco, LASANTA, M, MIGUEL, M, ILLANA, Andria, LORENZO, Maria, MUELAS, R and AGUERO, Alina (2016). Performance of HIPIMS deposited CrN/NbN nanostructured coatings exposed to 650°C in pure steam environment. Materials chemistry and physics, 179, 110-119. [Article]

PURANDARE, Yashodhan, EHIASARIAN, Arutiun and HOVSEPIAN, Papken (2016). Target poisoning during CrN deposition by mixed high power impulse magnetron sputtering and unbalanced magnetron sputtering technique. Journal of Vacuum Science & Technology A, 34 (4), 041502-1. [Article]

HOVSEPIAN, Papken, ARUNACHALAMSUGUMARAN, Arunprabhu, PURANDARE, Yashodhan, LOCH, Daniel and EHIASARIAN, Arutiun (2014). Effect of the degree of high power impulse magnetron sputtering utilisation on the structure and properties of TiN films. Thin Solid Films, 562, 132-139. [Article]

PURANDARE, Yashodhan, EHIASARIAN, Arutiun, SANTANA, Antonio and HOVSEPIAN, Papken (2014). ZrN coatings deposited by high power impulse magnetron sputtering and cathodic arc techniques. Journal of Vacuum Science & Technology A, 32 (3). [Article]

FAUZI, F., DISO, D G, ECHENDU, O K, PATEL, V, PURANDARE, Yashodhan, BURTON, R and DHARMADASA, I (2013). Development of ZnTe layers using an electrochemical technique for applications in thin-film solar cells. Semiconductor Science and Technology, 28 (4), 045005. [Article]

SUGUMARAN, A.A., PURANDARE, Yashodhan, MANDAL, P., EHIASARIAN, A.P. and HOVSEPIAN, Papken (2013). Effect of the degree of high power impulse magnetron sputtering (HIPIMS) utilisation on the corrosion properties of TiN films. In: Society of Vacuum Coaters 505/856-7188. 56th Annual Technical Conference Proceedings,. Society of Vacuum Coaters. [Book Section]

PURANDARE, Yashodhan, EHIASARIAN, Arutiun and HOVSEPIAN, Papken (2011). Structure and properties of ZrN coatings deposited by high power impulse magnetron sputtering technology. Journal of Vacuum Science and Technology A: Vacuum, Surfaces, and Films, 29 (1), 011004. [Article]

KAMATH, G, EHIASARIAN, Arutiun, PURANDARE, Yashodhan and HOVSEPIAN, Papken (2010). Microstructural and Oxidative Mechanical Wear Study on TiAlCN/VCN. In: 53rd Annual Technical Conference, 17 Apr 2010 - 22 Apr 2010. Society of Vacuum Coaters. [Conference or Workshop Item]

PURANDARE, Yashodhan, EHIASARIAN, Arutiun, STACK, M.M. and HOVSEPIAN, Papken (2010). CrN/NbN coatings deposited by HIPIMS: A preliminary study of erosion–corrosion performance. Surface and Coatings Technology, 204 (8), 1158-1162. [Article]