Items where Author is "Allen, Tom"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Item Type | Full Text | No Grouping
Number of items: 45.

Article

file
HAID, Daniel, FOSTER, Leon, HART, John, GREENWALD, Richard, ALLEN, Tom, SAREH, Pooya and DUNCAN, Olly (2023). Mechanical metamaterials for sports helmets: structural mechanics, design optimisation, and performance. Smart Materials and Structures, 32 (11): 113001.

file
GATT, Ian T, ALLEN, Tom and WHEAT, Jonathan (2023). Effects of using rigid tape with bandaging techniques on wrist joint motion during boxing shots in elite male athletes. Physical Therapy in Sport, 61, 82-90.

file
LESLIE, Gemma E, WINWOOD, Keith, WANG, Weizhuo, HAMILTON, Nick and ALLEN, Tom (2023). Effect of limb surrogate surface compliance on the impact response of wrist protectors. JSAMS Plus, 2: 100023.

file
ADAMS, Caroline, ALLEN, Tom, SENIOR, Terry, JAMES, David and HAMILTON, Nick (2021). Impact testing of snowboarding wrist protectors. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology.

file
TARABORRELLI, Luca, CHOPPIN, Simon, HAAKE, Steve, MOHR, Stefan and ALLEN, Tom (2021). Effect of materials and design on the bending stiffness of tennis rackets. European Journal of Physics, 42 (6), 065005.

file
NOVAK, Nejc, DUNCAN, Olly, ALLEN, Tom, ALDERSON, Andrew, VESENJAK, Matej and REN, Zoran (2021). Shear modulus of conventional and auxetic open-cell foam. Mechanics of Materials, 157, p. 103818.

filefile
DUNCAN, Olly, BAILLY, Nicolas, ALLEN, Tom, PETIT, Yvan, WAGNAC, Eric and ALDERSON, Andrew (2021). Effect of compressive strain rate on auxetic foam. Applied Sciences, 11 (3), e1207.

file
DUNCAN, Olly, ALDERSON, Andrew and ALLEN, Tom (2021). Fabrication, characterisation and analytical modelling of gradient auxetic closed cell foams. Smart Materials and Structures.

file
DUNCAN, Oliver, ALLEN, Tom, BIRCH, Alana, FOSTER, Leon, HART, John and ALDERSON, Andrew (2020). Effect of steam conversion on the cellular structure, Young's modulus and negative Poisson's ratio of closed-cell foam. Smart Materials and Structures, 30 (1), 015031.

file
LESLIE, Gemma, WANG, Weizhuo, WINWOOD, Keith, LIAUW, Chris, HAMILTON, Nick and ALLEN, Tom (2020). Effect of Surrogate Surface Compliance on the Measured Stiffness of Snowboarding Wrist Protectors. Proceedings, 49 (1), e84.

file
DUNCAN, Olly, NAYLOR, George, M, Joel Godfrey, ALLEN, Tom, FOSTER, Leon, HART, John and ALDERSON, Andrew (2020). Plantar Pressure Distribution under Uniform and Gradient Foam during Running and Jumping. Proceedings, 49 (1), e116.

file
TARABORRELLI, Luca, GRANT, Robyn, SULLIVAN, Matthew, CHOPPIN, Simon, SPURR, James, HAAKE, Steve and ALLEN, Tom (2019). Materials Have Driven the Historical Development of the Tennis Racket. Applied Sciences, 9 (20), e4352.

file
TARABORRELLI, Luca, GRANT, Robyn, SULLIVAN, Matthew, CHOPPIN, Simon, SPURR, James, HAAKE, Steve and ALLEN, Tom (2019). Recommendations for estimating the moments of inertia of a tennis racket. Sports Engineering, 22 (11).

file
DUNCAN, Oliver, CLEGG, Francis, ESSA, Abdusalam, BELL, Anthony, FOSTER, Leon, ALLEN, Tom and ALDERSON, Andrew (2019). Effects of heat exposure and volumetric compression on Poisson's ratios, Young's moduli and polymeric composition during thermo-mechanical conversion of auxetic open cell polyurethane foam. physica status solidi (b), 256 (1).

file
ADAMS, Caroline, JAMES, David, SENIOR, Terry, ALLEN, Tom and HAMILTON, Nick (2018). Effect of surrogate design on the measured stiffness of snowboarding wrist protectors. Sports Engineering, 15, p. 42.

file
DUNCAN, Oliver, SHEPHERD, Todd, MORONEY, Charlotte, FOSTER, Leon, VENKATRAMAM, Praburaj, WINWOOD, Keith, ALLEN, Tom and ALDERSON, Andrew (2018). Review of auxetic materials for sports applications: expanding options in comfort and protection. Applied Sciences, 8 (6), p. 941.

file
ELLIOTT, Nathan, CHOPPIN, Simon, GOODWILL, Simon, SENIOR, Terry, HART, John and ALLEN, Tom (2018). Single view silhouette fitting techniques for estimating tennis racket position. Sports Engineering, 21 (2), 137-147.

file
NEWTON-MANN, Chloe, WINWOOD, Keith, DRISCOLL, Heather, HAMILTON, Nick and ALLEN, Tom (2018). Finite element model of an impact on a palmar pad from a snowboard wrist protector. Proceedings, 2 (6), p. 314.

file
DUNCAN, Oliver, ALLEN, Tom, FOSTER, Leon, GATT, Ruben, GRIMA, Joseph N. and ALDERSON, Andrew (2018). Controlling density and modulus in auxetic foam fabrications—-implications for impact and indentation testing. Proceedings, 2 (6), p. 250.

file
ALLEN, Tom, GRANT, Robyn, SULLIVAN, Matthew, TARABORRELLI, Luca, CHOPPIN, Simon, SPURR, James and HAAKE, Steve (2018). Recommendations for measuring tennis racket parameters. Proceedings, 2 (6), p. 263.

file
ALLEN, Tom, HEWAGE, Trishan, NEWTON-MANN, Chloe, WANG, Weizhuo, DUNCAN, Oliver and ALDERSON, Andrew (2017). Fabrication of auxetic foam sheets for sports applications. physica status solidi (b), 254 (12), p. 1700596.

filefilefilefilefilefilefilefilefilefilefile
DUNCAN, Oliver, ALLEN, Tom, FOSTER, Leon, SENIOR, Terry and ALDERSON, Andrew (2017). Fabrication, characterisation and modelling of uniform and gradient auxetic foam sheets. Acta Materialia, 126, 426-437.

filefile
ADAMS, Caroline, JAMES, David, SENIOR, Terry, ALLEN, Tom and HAMILTON, Nick (2016). Development of a method for measuring quasi-static stiffness of snowboard wrist protectors. Procedia Engineering, 147, 378-383.

filefile
DRISCOLL, Heather, HART, John and ALLEN, Tom (2016). Use of image based sports case studies for teaching mechanics. Procedia engineering, 147, 884-889.

filefile
DUNCAN, Oliver, FOSTER, Leon, SENIOR, Terry, ALLEN, Tom and ALDERSON, Andrew (2016). A comparison of novel and conventional fabrication methods for auxetic foams for sports safety applications. Procedia Engineering, 147, 384-389.

filefile
DUNCAN, Olly, FOSTER, Leon, SENIOR, Terry, ALDERSON, Andrew and ALLEN, Tom (2016). Quasi-static characterisation and impact testing of auxetic foam for sports safety applications. Smart Materials and Structures, 25 (5).

file
ALLEN, Tom, MARTINELLO, Nicolo, ZAMPIERI, Davide, HEWAGE, Trishan, SENIOR, Terry, FOSTER, Leon and ALDERSON, Andrew (2015). Auxetic Foams for Sport Safety Applications. Procedia Engineering, 112, 104-109.

file
ALLEN, Tom, SHEPHERD, Jonathon, HEWAGE, Trishan M, SENIOR, Terry, FOSTER, Leon and ALDERSON, Andrew (2015). Low-kinetic energy impact response of auxetic and conventional open-cell polyurethane foams. physica status solidi b, 252 (7), 1631-1639.

file
ALLEN, Tom, CHOPPIN, Simon and KNUDSON, Diane (2015). A review of tennis racket performance parameters. Sports Engineering, 19 (1), 1-11.

file
ALLEN, Tom, FAUTEUX-BRAULT, Olivier, JAMES, David and CURTIS, David (2014). Finite element model of a cricket ball impacting a bat. Procedia Engineering, 72, 521-526.

file
ELLIOTT, Nathan, CHOPPIN, Simon, GOODWILL, Simon and ALLEN, Tom (2014). Markerless tracking of tennis racket motion using a camera. Procedia Engineering, 72, 344-349.

file
WASHIDA, Yudai, ELLIOTT, Nathan and ALLEN, Tom (2014). Measurement of main strings movement and its effect on tennis ball spin. Procedia Engineering, 72, 557-562.

file
ALLEN, Tom, GOUGH, Jim, KONCAN, David, JAMES, David, MORALES, Eric and WOOD, Paul (2014). Modelling the acoustics of a golf ball impacting a titanium plate. Procedia Engineering, 72, 587-592.

NICOLAIDES, Alexander, ELLIOTT, Nathan, KELLEY, John, PINAFFO, Mauro and ALLEN, Tom (2013). Effect of string bed pattern on ball spin generation from a tennis racket. Sports Engineering, 16 (3), 181-188.

ALLEN, Tom, BOWLEY, Adam, WOOD, Paul, HENRIKSON, Erik, MORALES, Eric and JAMES, David (2012). Effect of temperature on golf ball dynamics. Procedia engineering, 34, 634-639.

JAMES, David, CURTIS, David, ALLEN, Tom and RIPPIN, Tom (2012). The validity of a rigid body model of a cricket ball-bat impact. Procedia engineering, 34, 682-687.

ALLEN, Tom, FOSTER, Leon, CARRÉ, Matt and CHOPPIN, Simon (2012). Characterising the impact performance of field hockey sticks. Sports Engineering, 15 (4), 221-226.

CHOPPIN, Simon and ALLEN, Tom (2012). Editorial: Special issue on predictive modelling in sport. Journal of Sports Engineering and Technology, 226 (2), 75-76.

HAAKE, Steve, ALLEN, Tom, JONES, Alex, SPURR, James and GOODWILL, Simon (2012). Effect of inter-string friction on tennis ball rebound. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 226 (7), 626-635.

WIART, N., KELLEY, John, JAMES, David and ALLEN, Tom (2011). Effect of temperature on the dynamic properties of soccer balls. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 225 (4), 189-198.

WIART, N., KELLEY, John, JAMES, David and ALLEN, Tom (2011). Effect of temperature on the dynamic properties of soccer balls. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 225 (4), 189-198.

ALLEN, Tom, IBBITSON, James and HAAKE, Steve (2011). Spin generation during an oblique impact of a compliant ball on a non-compliant surface. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 226 (2), 86-95.

Book Section

filefile
ALLEN, Tom, DUNCAN, Olly, FOSTER, Leon, SENIOR, Terry, ZAMPIERI, Davide, EDEH, Victor and ALDERSON, Andrew (2017). Auxetic foam for snowsport safety devices. In: Snow sports trauma and safety: proceedings of the International Society of Skiing Safety. Advances in Experimental Medicine and Biology, 21 . International Society for Skiing Safety.

Conference or Workshop Item

file
DUNN, Marcus and ALLEN, Tom (2021). Validation of a method to assess offside technologies in dynamic movement. In: 2021 FIFA Research Synergy Workshop, 11 Oct 2021. Federation Internationale de Football Association. (Unpublished)

file
DUNN, Marcus and ALLEN, Tom (2020). Development of dynamic test methods to evaluate offside technology accuracy​. In: 2020 FIFA Research Symposium, 22 Oct 2021. Federation Internationale de Football Association (FIFA). (Unpublished)

This list was generated on Thu Mar 28 09:26:16 2024 UTC.