Items where Research Institute, Centre or Group is "Materials and Engineering Research Institute > Structural Materials and Integrity Research Centre > Centre for Corrosion Technology"

Up a level
Export as [feed] RSS
Group by: Creators | Year | Item Type | Full Text | No Grouping
Number of items at this level: 212.

AFELUMO, Adebola and HASAN, Syed (2011). Corrosion behaviour of closed cell metal foams in 3.5wt% NaCl at room temperature. In: National Student Conference in Metallic Materials 2011, Halifax Hall, The Endcliffe Village, Sheffield, 20 June 2011. (Unpublished)

AKID, R. (2007). Hybrid sol gel coatings are customized to fight corrosion. Materials performance, 46 (11), 14-15.

AKID, R. and WANG, H. (2006). Application of sol-gel technology for anticorrosion coatings and surface pretreatments. Galvanotechnik, 97 (9), 2098-2109.

AKID, R. and WANG, H. (2008). Protective developments - Sol-gel systems show promise in antifouling and anticorrosive systems. European Coatings Journal, 5, 24-28.

AKID, R. and WANG, H. (2006). Sol-gel coatings: an alternative corrosion protection system. Corrosion Management (May/June), 9-12.

AKID, R., WANG, H., SMITH, T. J., GREENFIELD, D. and EARTHMAN, J. C. (2008). Biological functionalization of a sol-gel coating for the mitigation of microbial-induced corrosion. Advanced functional materials, 18 (2), 203-211.

AKID, Robert, DMYTRAKH, I. M. and GONZALEZ-SANCHEZ, J. (2006). Fatigue damage accumulation: the role of corrosion on the early stages of crack development. Corrosion engineering science and technology, 41 (4), 328-335.

AKID, Robert and GARMA, M. (2004). Scanning vibrating reference electrode technique: a calibration study to evaluate the optimum operating parameters for maximum signal detection of point source activity. Electrochimica acta, 49 (17-18), 2871-2879.

AKID, Robert, HOVSEPIAN, Papken and KOK, Y. N. (2005). Tribocorrosion testing of stainless steel (SS) and PVD coated SS using a modified scanning reference electrode technique. Wear, 259 (7-12), 1472-1481.

AKID, Robert and MILLS, D. J. (2001). A comparison between conventional macroscopic and novel microscopic scanning electrochemical methods to evaluate galvanic corrosion. Corrosion science, 43 (7), 1203-1216.

AKID, R., GOBARA, M. and WANG, H. (2011). Corrosion protection performance of novel hybrid polyaniline/sol–gel coatings on an aluminium 2024 alloy in neutral, alkaline and acidic solutions. Electrochimica Acta, 56 (5), 2483-2492.

ALI, M.A., HASAN, Syed and MYRIOUNIS, Dimitrios (2012). A method of analysis to estimate thermal down-shock stress profiles in hollow cylinders when subjected to transient heat/cooling cycle. In: YIGIT, Faruk and HASHMI , Mohammed S.J., (eds.) Materials and Manufacturing Technologies. Advanced Materials Research , XIV (445). Switzerland, Trans Tech Publications Ltd., 893-898.

ATKINSON, J. D., CORRIGAN, M. R., HIGGINS, A. D. and ZHAO, Z. J. (2007). Interaction of EAC and DSA in C-Mn piping steels. In: 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, Whistler, Canada, 19-23 August 2007. (Unpublished)

ATKINSON, J. D. and SAITHALA, J. R. (2007). Stress corrosion behaviour of super duplex stainless steel in dilute chloride solutions at 130C. In: Duplex 2007 International Conference and Expo, Grado, Italy, 18-20 June, 2007. (Unpublished)

ATKINSON, J. D. and SAITHALA, J. R. (2007). The effect of temperature and choride concentration on the pitting behaviour of Zeron100, 2205 and Ferralium Alloy255 duplex stainless steels. In: Duplex 2007 International Conference and Expo, Grado, Italy, 18-20 June, 2007. (Unpublished)

BERNARDO, E and BINGHAM, Paul (2011). Sintered silicophosphate glass ceramics from MBM ash and recycled soda-lime-silica glass. Advances in Applied Ceramics, 110 (1), 41-48.

BINGHAM, Paul (2003). Container glass formulation : a fresh look at an old problem. Glass, 80, p. 336.

BINGHAM, Paul (2009). Design of new energy-friendly compositions. In: WALLENBERGER, Frederick T. and BINGHAM, Paul, (eds.) Fiberglass and glass technology : energy-friendly compositions and application. Springer, 267-354.

BINGHAM, Paul (2004). The effects of 1 wt % P2O5 addition on the properties of container glass. Glass technology, 45 (6), 255-258.

BINGHAM, Paul and BARNEY, E R (2012). Structure of iron phosphate glasses modified by alkali and alkaline earth additions: neutron and x-ray diffraction studies. Journal of Physics: Condensed Matter, 24 (17), p. 175403.

BINGHAM, Paul, CONNELLY, A J, HYATT, N C and HAND, R J (2011). Corrosion of glass contact refractories for the vitrification of radioactive wastes: a review. International Materials Reviews, 56 (4), 226-242.

BINGHAM, Paul, CONNELLY, A., HAND, R. and HYATT, N. (2010). Vitrification of legacy and intermediate level radioactive wastes : opportunities and challenges. Nuclear Future, 6 (6), 250-254.

BINGHAM, Paul, CONNELLY, A.J., CASSINGHAM, N.J. and HYATT, N.C. (2011). Oxidation state and local environment of selenium in alkali borosilicate glasses for radioactive waste immobilisation. Journal of Non-Crystalline Solids, 357 (14), 2726-2734.

BINGHAM, Paul, CONNELLY, A.J., HAND, R.J., HYATT, N.C. and NORTHRUP, P.A. (2007). Solubility and speciation of sulphur in glasses for waste immobilization. In: Proceedings of the XXI International Congress on Glass: Strasbourg, France, 1 - 7 July 2007. Society of Glass Technology.

BINGHAM, Paul, CONNELLY, A.J., HAND, R.J., HYATT, N.C., NORTHRUP, P.A., ALONSO MORI, R., GLATZEL, P., KAVCIC, M., ZITNIK, M., BUCAR, K. and EDGE, R. (2010). A multi-spectroscopic investigation of sulphur speciation in silicate glasses and slags. Glass technology, 51 (2), 63-80.

BINGHAM, Paul, CONNELLY, A.J., HAND, R.J., HYATT, N.C. and NORTHUP, P.A. (2009). Incorporation and speciation of sulphur in glasses for waste immobilisation. Glass technology, 50 (3), 135-138.

BINGHAM, Paul, FORDER, S. D., HAND, R. J. and LAVAYSIERRE, A. (2005). Mössbauer studies of phosphate glasses for the immobilisation of toxic and nuclear wastes. Hyperfine Interactions, 165 (1-4), 135-140.

BINGHAM, Paul and HAND, R (2005). Vitrified metal finishing wastes I. Composition, density and chemical durability. Journal of Hazardous Materials, 119 (1-3), 125-133.

BINGHAM, Paul and HAND, R.J. (2007). Addition of P2O5 to SiO2-Al2O3-B2O3-MgO-CaO-Na2O glass : a study of its effects on glass properties, structure and melting behaviour. Glass technology, 48 (2), 78-88.

BINGHAM, Paul and HAND, R.J. (2007). Recycling of incinerator ashes : potential energy-saving raw materials for the manufactureof glasses and ceramics or simply low-grade aggregate materials? In: FREIMAN, S., (ed.) Proceedings of the 1st International Congress on Ceramics: A Global Roadmap. Wiley.

BINGHAM, Paul and HAND, R.J. (2008). Sulphate incorporation and glass formation in phosphate systems for nuclear and toxic waste immobilization. Materials Research Bulletin, 43 (7), 1679-1693.

BINGHAM, Paul and HAND, R.J. (2006). Vitrification of toxic wastes : a brief review. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 105 (1), 21-31.

BINGHAM, Paul, HAND, R.J. and FORDER, S.D. (2006). Doping of iron phosphate glasses with Al2O3, SiO2 or B2O3 for improved thermal stability. Materials Research Bulletin, 41 (9), 1622-1630.

BINGHAM, Paul, HAND, R.J., FORDER, S.D., LAVAYSIERRE, A, DELOFFRE, F, KILCOYNE, S.H. and YASIN, I. (2006). Structure and properties of iron borophosphate glasses. Physics and Chemistry of Glasses, 47 (4), 313-317.

BINGHAM, Paul, HAND, R.J., FORDER, S.D. and LAVAYSIERRE, A. (2005). Vitrified metal finishing wastes II. Thermal and structural characterisation. Journal of Hazardous Materials, 122 (1-2), 129-138.

BINGHAM, Paul, HAND, R.J., FORDER, S.D., LAVAYSIERRE, A., KILCOYNE, S.H. and YASIN, I. (2006). Preliminary studies of sulphate solubility and redox in 60P2O5–40Fe2O3 glasses. Materials Letters, 60 (6), 844-847.

BINGHAM, Paul, HAND, R.J., HANNANT, O.M., FORDER, Sue and KILCOYNE, S.H. (2009). Effects of modifier additions on the thermal properties, chemical durability, oxidation state and structure of iron phosphate glasses. Journal of Non-Crystalline Solids, 355 (28-30), 1526-1538.

BINGHAM, Paul, HAND, Russell J. and SCALES, Charlie R. (2006). Immobilisation of simulated plutonium-contaminated material in phosphate glass : an initial scoping study. MRS Proceedings, 932.

BINGHAM, Paul, HAND, Russell J., STENNETT, Martin C., HYATT, Neil C. and HARRISON, Mike T. (2008). The use of surrogates in waste immobilization studies : a case study of plutonium. MRS Proceedings, 1107, 421-428.

BINGHAM, Paul, HYATT, N. C. and HAND, R. J. (2012). Vitrification of UK intermediate level radioactive wastes arising from site decommissioning : property modelling and selection of candidate host glass compositions. Glass technology, 53 (3), 83-100.

BINGHAM, Paul, HYATT, Neil C, HAND, Russell J and WILDING, Christopher R (2008). Glass development for vitrification of Wet Intermediate Level Waste (WILW) from decommissionning of the Hinkley Point ‘A’ Site. MRS Proceedings, 1124.

BINGHAM, Paul and JACKSON, C.M. (2008). Roman blue-green bottle glass: chemical–optical analysis and high temperature viscosity modelling. Journal of Archaeological Science, 35 (2), 302-309.

BINGHAM, Paul and MARSHALL, M. (2005). Reformulation of container glasses for environmental benefit through lower melting temperatures. Glass technology, 46 (1), 11-19.

BINGHAM, Paul, PARKER, J.M., SEARLE, T., WILLIAMS, J.M. and FYLES, K. (1999). Redox and clustering of iron in silicate glasses. Journal of Non-Crystalline Solids, 253 (1-3), 203-209.

BINGHAM, Paul, PARKER, J.M., SEARLE, T., WILLIAMS, J.M. and FYLES, K. (1998). Redox and clustering of iron in silicate glasses. In: Proceedings of the XVIII International Congress on Glass, San Francisco, July 1998. Society of Glass Technology.

BINGHAM, Paul, PARKER, J.M., SEARLE, T., WILLIAMS, J.M. and SMITH, I. (2001). Novel structural behaviour of iron in alkali-alkaline earth-silica glasses. In: Proceedings of the XIX International Congress on Glass, Edinburgh, July 2001. Society of Glass Technology.

BINGHAM, Paul, PARKER, J.M., SEARLE, T.M. and SMITH, I. (2007). Local structure and medium range ordering of tetrahedrally coordinated Fe3+ ions in alkali–alkaline earth–silica glasses. Journal of Non-Crystalline Solids, 353 (24-25), 2479-2494.

BINGHAM, Paul, PARKER, John M, SEARLE, Tim, WILLIAMS, John M and SMITH, Ian (2002). Novel structural behaviour of iron in alkali–alkaline-earth–silica glasses. Comptes Rendus Chimie, 5 (11), 787-796.

BINGHAM, Paul, YANG, G., HAND, R.J. and MÖBUS, G. (2008). Boron environments and irradiation stability of iron borophosphate glasses analysed by EELS. Solid State Sciences, 10 (9), 1194-1199.

BLAZHNOV, I. V., MALOMUZH, N. P. and LISHCHUK, S. V. (2005). Dielectric permittivity of glycerol in the high viscosity region. Chemical Physics Letters, 418 (206), 230-234.

BLAZHNOV, I. V., MALOMUZH, N. P. and LISHCHUK, S. V. (2004). Temperature dependence of density, thermal expansion coefficient and shear viscosity of supercooled glycerol as a reflection of its structure. The Journal of Chemical Physics, 121 (13), 6435-6441.

BREEN, C., AKID, R., HABESCH, S. and SAMMON, C. (2000). How clean is clean? Materials World, 8 (4), 15-17.

BRYANT, D. and GREENFIELD, D. (2006). The use of fluorescent probes for the detection of under-film corrosion. Progress in organic coatings. B, 57 (4), 416-420.

BRYANT, D. E. and GREENFIELD, D. (2006). The use of fluorescent probes for the detection of under-film corrosion. Progress in Organic Coatings, 57 (4), 416-420.

BRYANT, D. E., GREENFIELD, D., WALSHAW, R. D., EVANS, S. M., NIMMO, A. E., SMITH, C. L., WANG, L. M., PASEK, M. A. and KEE, T. P. (2009). Electrochemical studies of iron meteorites: phosphorus redox chemistry on the early Earth. International Journal of Astrobiology, 8 (1), 27-36.

BRYANT, D. E., MARRIOTT, K. E. R., GREENFIELD, David, MACGREGOR, S. A., SMITH, C., PASEK, M. A. and KEE, T. (2010). The rise of chemical complexity from meteorite sources: Implications for origin-of-life studies. Origins of Life and Evolution of Biospheres, 40, p. 513.

BRYANT, D. E., MARRIOTT, K. E. R., GREENFIELD, David, MACGREGOR, S.A., SMITH, C., PASEK, M.A. and KEE, T. P. (2010). Special Issue: Abstracts from the 9th European Workshop on Astrobiology, Brussels, October 12–14, 2009. Origins of Life and Evolution of Biospheres, 40 (6), 499-607.

BRYANT, David E., GREENFIELD, David, WALSHAW, Richard D., JOHNSON, Benjamin R.G., HERSCHY, Barry, SMITH, Caroline, PASEK, Matthew A., TELFORD, Richard, SCOWEN, Ian, MUNSHI, Tasnim, EDWARDS, Howell G.M., COUSINS, Claire R., CRAWFORD, Ian A. and KEE, Terence P. (2013). Hydrothermal modification of the Sikhote-Alin iron meteorite under low pH geothermal environments. A plausibly prebiotic route to activated phosphorus on the early Earth. Geochimica et Cosmochimica Acta, 109, 90-112.

CASSINGHAM, N.J., STENNETT, M.C., BINGHAM, Paul, AQUILANTI, G. and HYATT, N.C. (2010). The role of Zn in model nuclear waste glasses studied by XAS. In: Diamond '10 Conference - Decommissioning, Immobilisation and Management of, Manchester, UK, 15-16 December 2010.

CASSINGHAM, Nathan J., STENNETT, Martin C., BINGHAM, Paul, HYATT, Neil C. and AQUILANTI, Giuliana (2011). The structural role of Zn in nuclear waste glasses. International Journal of Applied Glass Science, 2 (4), 343-353.

CHEN, Yao-Chang, REEVES-MCLAREN, Nik, BINGHAM, Paul, FORDER, Sue and WEST, Anthony R. (2012). Synthesis and characterization of Li11Nd18Fe4O39−δ. Inorganic Chemistry, 51 (15), 8073-8082.

CICEK, B., ESPOSITO, L., TUCCI, A., BERNARDO, E., BOCCACCINI, A.R. and BINGHAM, Paul (2012). Microporous glass ceramics from combination of silicate, borate and phosphate wastes. Advances in Applied Ceramics, 111 (7), 415-421.

CONNELLY, A.J., HAND, R.J., BINGHAM, Paul and HYATT, N.C. (2011). Mechanical properties of nuclear waste glasses. Journal of Nuclear Materials, 408 (2), 188-193.

DELUCA, Marco, SCHUETZ, Denis, AKSEL, Elena, PICHT, G, FORONDA, H, FETEIRA, Antonio, REICHMANN, Klaus, WEBBER, K and JONES, Jacob (2013). Raman spectroscopy of Sodium Bismuth Titanate ceramics. In: International Ultrasonics Symposium International Symposium on the Applications of Ferroelectrics Joint International Frequency Control Symposium European Frequency and Time Forum, Prague, Czech Republic, 21-25th July 2013. (Unpublished)

FATOBA, Olusegun, AKID, R, MYRIOUNIS, Dimitrios and CURIEL-SOSA, Jose Luis (2012). Lifetime modelling for corrosion fatigue. In: National Student Conference in Metallic Materials 2012, Manchester Conference Centre and Hotel, Manchester, 25-26 June 2012. (Unpublished)

FERRARELLI, Matthew C., ADAMS, Timothy B., FETEIRA, Antonio, SINCLAIR, Derek C. and WEST, Anthony R. (2006). High intrinsic permittivity in Na[sub 1∕2] Bi[sub 1∕2] Cu[sub 3] Ti[sub 4] O[sub 12]. Applied Physics Letters, 89 (21), p. 212904.

FETEIRA, Antonio (2009). Negative Temperature Coefficient Resistance (NTCR) Ceramic Thermistors : an industrial perspective. Journal of the American Ceramic Society, 92 (5), 967-983.

FETEIRA, Antonio, ELSEBROCK, R., DIAS, A., MOREIRA, R.L., LANAGAN, M.T. and SINCLAIR, D.C. (2006). Synthesis and characterisation of La0.4Ba0.6Ti0.6RE0.4O3 (where RE=Y, Yb) ceramics. Journal of the European Ceramic Society, 26 (10-11), 1947-1951.

FETEIRA, Antonio, GILLIE, Lisa J., ELSEBROCK, Ralf and SINCLAIR, Derek C. (2007). Crystal structure and dielectric properties of LaYbO3. Journal of the American Ceramic Society, 90 (5), 1475-1482.

FETEIRA, Antonio, IDDLES, David, PRICE, Tim, MUIR, Duncan and REANEY, Ian M. (2010). High-permittivity and low-loss microwave dielectric ceramics based on (x)RE(Zn1/2Ti1/2)O3-(1−x)CaTiO3 (RE=La and Nd). Journal of the American Ceramics Society, 94 (3), 817-821.

FETEIRA, Antonio, KEITH, G.M., RAMPLING, M.J., KIRK, C.A., REANEY, I.M., SARMA, K., MC. ALFORD, N. and SINCLAIR, D.C. (2002). Synthesis and characterisation of Ga-doped hexagonal BaTiO3. Crystal Engineering, 5 (3-4), 439-448.

FETEIRA, Antonio and REICHMANN, Klaus (2010). NTC Ceramics: Past, Present and Future. Advances in Science and Technology, 67, 124-133.

FETEIRA, Antonio, SARMA, Kumaravinothan, ALFORD, Neil McN., REANEY, Ian M. and SINCLAIR, Derek C. (2003). Microwave dielectric properties of Gallium-Doped Hexagonal Barium Titanate ceramics. Journal of the American Ceramic Society, 86 (3), 511-513.

FETEIRA, Antonio, SINCLAIR, D. C. and LANAGAN, M. T. (2010). Effects of average and local structure on the dielectric behavior of (1−x)BaTiO[sub 3]–xLaYO[sub 3] (0≤x≤0.40) ceramics. Journal of Applied Physics, 108 (1), 014112.

FETEIRA, Antonio, SINCLAIR, D. C. and LANAGAN, M. T. (2006). Microstructural and electrical characterisation of LaxBa1-xTi1-xYxO3 (0 <= x <= 0.50) ceramics. In: OHJI, T., SEKINO, T. and NIIHARA, K, (eds.) Science of Engineering Ceramics III : proceedings of the 3rd International Symposium. Key engineering materials (317-8). Trans Tech Pubn, 873-876.

FETEIRA, Antonio and SINCLAIR, Derek C. (2008). Microwave dielectric properties of low firing temperature Bi2W2O9 ceramics. Journal of the American Ceramic Society, 91 (4), 1338-1341.

FETEIRA, Antonio and SINCLAIR, Derek C. (2009). The influence of nanometric phase separation on the dielectric and magnetic properties of (1 − x)BaTiO3–xLaYbO3 (0 ≤ x ≤ 0.60) ceramics. Journal of Materials Chemistry, 19 (3), 356-359.

FETEIRA, Antonio, SINCLAIR, Derek C. and KREISEL, Jens (2010). Average and Local Structure of (1−x)BaTiO3−xLaYO3 (0≤x≤0.50) Ceramics. Journal of the American Ceramic Society, 93 (12), 4174-4181.

FETEIRA, Antonio, SINCLAIR, Derek C. and LANAGAN, Michael T. (2007). Structural and electrical characterization of CeAlO[sub 3] ceramics. Journal of Applied Physics, 101 (6), 064110.

FETEIRA, Antonio, SINCLAIR, Derek C. and LANAGAN, Michael T. (2006). Structure and microwave dielectric properties of Ca1?xYxTi1?xAlxO3 (CYTA) ceramics? [J. Mater. Res. 20, 2391 (2005)]. Journal of Materials Research, 21 (9), p. 2429.

FETEIRA, Antonio, SINCLAIR, Derek C. and LANAGAN, Michael T. (2005). Structure and microwave dielectric properties of Ca1− xY xTi1− xAl xO3 (CYTA) ceramics. Journal of Materials Research, 20 (09), 2391-2399.

FETEIRA, Antonio, SINCLAIR, Derek C., RAJAB, Khalid Z. and LANAGAN, Michael T. (2008). Crystal structure and microwave dielectric properties of Alkaline-Earth Hafnates, AHfO3(A=Ba, Sr, Ca). Journal of the American Ceramic Society, 91 (3), 893-901.

FETEIRA, Antonio, SINCLAIR, Derek C. and REANEY, Ian M. (2006). Synthesis and characterization of BaTi1-xGaxO3-delta (0x0.15) ceramics. Journal of the American Ceramic Society, 89 (7), 2105-2113.

FETEIRA, Antonio, SINCLAIR, Derek C., REANEY, Ian M. and LANAGAN, Michael T. (2005). Structure-property relationships of BaTi1-2yGayNbyO3 (0<=y<=0.35) ceramics. Journal of the American Ceramic Society, 88 (11), 3055-3062.

FETEIRA, Antonio, SINCLAIR, Derek C., REANEY, Ian M., SOMIYA, Yoshitaka and LANAGAN, Michael T. (2004). BaTiO3-Based ceramics for tunable microwave applications. Journal of the American Ceramic Society, 87 (6), 1082-1087.

FETEIRA, Antonio, LUISMAN, Luke, SCHILEO, Giorgio, DELUCA, Marco and REICHMANN, Kaus (2013). Structure-property relationships in BaTiO3-BiFeO3-BiYbO3 Ceramics. In: Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2013)., Orlando, USA, 23-26th April 2013. (Unpublished)

FORDER, S D, HANNANT, O M, BINGHAM, Paul and HAND, R J (2010). Concerning the use of standards for identifying coordination environments in glasses. Journal of Physics: Conference Series, 217, 012072.

FORDER, S D, HANNANT, O M, BINGHAM, Paul and HAND, R J (2010). Concerning the use of standards for identifying coordination environments in glasses. Journal of Physics : Conference Series, 217, 012072.

GITTENS, J. E., WANG, H., SMITH, T. J., AKID, R. and GREENFIELD, D. (2009). Biotic sol-gel coating for the inhibition of corrosion in seawater. ECS transactions, 24 (1), 211-229.

HANNANT, O. M., FORDER, Sue, BINGHAM, Paul and HAND, R. J. (2009). Structural studies of iron in vitrified toxic wastes. Hyperfine Interactions, 192 (1-3), 37-42.

HANNANT, Oliver M., BINGHAM, Paul, HAND, Russell J. and FORDER, Sue D. (2008). A Mössbauer study of iron in vitrified wastes. MRS Proceedings, 1107, 215-222.

HARRISON, Mike, SCALES, Charlie R., BINGHAM, Paul and HAND, Russell J. (2006). Survey of potential glass compositions for the immobilisation of the UK's separated plutonium stocks. MRS Proceedings, 985.

HASAN, S. T., BEYNON, J. H. and FAULKNER, R. G. (2004). Role of segregation and precipitates on interfacial strengthening mechanisms in SiC reinforced aluminium alloy when subjected to thermomechanical processing. Journal of Materials Processing Technology, 153, 758-764.

HASAN, Syed (2012). Biaxial themal down shock analysis of a thin 316 stainless steel plate. In: NuMat 2012 : the Nuclear Materials Conference, Osaka, Japan, 22-25 October 2012. (Submitted)

HASAN, Syed (2012). Fatigue behaviour of robbed steel structures. In: 15th International Conference on Advances in Materials and Processing Technologies (AMPT 2012), Wollongong, Australia, 23-26 September 2012. (Unpublished)

HASAN, Syed and EASTERBRROK, L.E. (2009). Elastic-plastic thermal shock analysis : modelling of biaxial crack growth rates in thin 316 stainless steel plate. In: AMPT 2009 : Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia, 26-29 October 2009. (Unpublished)

HASAN, Syed and NASSER, M.A. (2012). Elastic-Plastic thermal shock analysis. In: NuMat 2012 : the Nuclear Materials Conference, Osaka, Japan, 22-25 October 2012. (Submitted)

HASAN, Syed and SHAW, C.A. (2010). A method of analysis to predict fatigue life estimation of aluminium honeycomb/metallic foam core sandwich panels. In: AMPT 2010 : Advances in Materials and Processing Technologies, Paris, 24-27 October 2010. (Unpublished)

HU, H. and AKID, R. (2001). Cathodic-polarization effects on the long/short corrosion-fatigue crack growth rate of an offshore steel. Materials science, 37 (6), 902-909.

JABBAL, M., LIDDLE, S., POTTS, Jonathan and CROWTHER, W. (2013). Development of design methodology for a synthetic jet actuator array for flow separation control applications. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 227 (1), 110-124.

KALANTARI, Kambiz, STERIANOU, Iasmi, SINCLAIR, Derek C., BINGHAM, Paul, POKORNÝ, Jan and REANEY, Ian M. (2012). Structural phase transitions in Ti-doped Bi1-xNdxFeO3 ceramics. Journal of Applied Physics, 111 (6), 064107.

KARAGIANNI, E.T., MYRIOUNIS, Dimitrios, HASAN, Syed and MATIKAS, T.E. (2010). The thermomechanical processing effects of Al/SiCp composites under static loading testing. In: 1st Greek and Greek-Ukrainian Conference on Fracture Mechanics of Materials and Structures, Xanthi, Greece, 20-24 October 2010. (Unpublished)

KORDATOS, E. Z., MYRIOUNIS, Dimitrios, HASAN, Syed and MATIKAS, T. E. (2009). Monitoring the fracture behavior of SiCp/Al alloy composites using infrared lock-in thermography. In: WU, H. Felix, DIAZ, Aaron A., SHULL, Peter J. and VOGEL, Dietmar, (eds.) Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2009. Proceeding of SPIE (7294). SPIE.

KRAWIEC, H., VIGNAL, V. and AKID, R. (2008). Numerical modelling of the electrochemical behaviour of 316 stainless steel based upon static and dynamic experimental microcapillary-based techniques: effect of electrolyte flow and capillary size. Surface and Interface Analysis, 40 (3-4), 315-319.

KUMAR, Vikas and WANG, Heming (2013). Plasmonic Au nanoparticles for enhanced broadband light absorption in inverted organic photovoltaic devices by plasma assisted physical vapour deposition. Organic Electronics, 14 (2), 560-568.

KUMAR, Vikas, WANG, Heming and RODENBURG, Cornelia (2014). High-efficiency inverted polymer solar cells via dual effects of introducing the high boiling point solvent and the high conductive PEDOT:PSS layer. Organic Electronics, 15 (9), 2059-2067.

LARROUMET, D., GREENFIELD, D., AKID, R. and YARWOOD, J. (2007). Raman spectroscopic studies of the corrosion of model iron electrodes in sodium chloride solution. Journal of Raman Spectroscopy, 38 (12), 1577-1585.

LARROUMET, D., GREENFIELD, D., AKID, R. and YARWOOD, J. (2008). Spectroscopic studies of the corrosion of model iron electrodes in carbonate and phosphate buffer solutions. Journal of Raman Spectroscopy, 39 (12), 1740-1748.

LEWIS, O. D., CRITCHLOW, G. W. and WILCOX, G. D. (2009). The role of surface cleaning as a preliminary to satisfactory coating application. Corrosion management (89), 11-16.

LEWIS, O. D., GREENFIELD, D., AKID, R., DAHM, R. H. and WILCOX, G. D. (2010). Conversion coatings for zinc electrodeposits from modified molybdate solutions. Transactions of the Institute of Metal Finishing, 88 (2), 107-116.

LEWIS, O. D., GREENFIELD, D., AKID, R., DAHM, R. H. and WILCOX, G. W. (2006). SVET investigation into use of simple molybdate passivation treatments on electrodeposited zinc coatings. Transactions of the Institute of Metal Finishing, 84 (4), 188-195.

LEWIS, Oliver, CRITCHLOW, Gary, WILCOX, Geoffrey, DEZEEUW, Ard and SANDER, Joerg (2012). A study of the corrosion resistance of a waterborne acrylic coating modified with nano-sized Titanium Dioxide. Progress in Organic Coatings, 73 (1), 88-94.

file
LEWIS, Oliver, O'FLAHERTY, Fin, LAMBERT, Paul, STEPHENSON, Dan, BODEN, M and THISTLETHWAITE, S (2011). A Study of Aluminium Zinc Indium Thermal Spray Coatings for the Protection of Steel Rebars in Reinforced Concrete. In: 5th RIPT (Les Recontres Internationales sur la Projection Themique), Limoges, France, 7-9 December 2011.

LEWIS, Oliver, SETH, Sampan, JONES, Alan Hywel, FARMILO, Nick, STEPHENSON, Daniel, BODEN, Marcela and THISTLETHWAITE, Stuart (2011). The development and optimization of aluminium alloys for thermal spray coating application to steel substrates. In: 5th RIPT (Les Recontres Internationales sur la Projection Themique), Limoges, France, 7-9 December 2011. (Unpublished)

LI, Shu-Xin, LI, Lei, YU, Shu-Rong, AKID, Robert and XIA, Hong-Bo (2010). Investigation of intergranular corrosion of 316L stainless steel diffusion bonded joint by electrochemical potentiokinetic reactivation. Corrosion Science.

LI, Ming, FETEIRA, Antonio, MIRSANEH, Mehdi, LANAGAN, Michael T. and SINCLAIR, Derek C. (2010). A link between p-type electrical conduction and microwave dielectric loss in highly ordered Ba(Co1/3Nb2/3)O3 ceramics. Journal of Materials Research, 25 (06), 1011-1014.

LI, Ming, FETEIRA, Antonio, MIRSANEH, Mehdi, LEE, Soonil, LANAGAN, Michael T., RANDALL, Clive A. and SINCLAIR, Derek C. (2010). Influence of nonstoichiometry on extrinsic electrical conduction and microwave dielectric loss of BaCo1/3Nb2/3O3 ceramics. Journal of the American Ceramic Society, 93 (12), 4087-4095.

LI, Ming, FETEIRA, Antonio and SINCLAIR, Derek C. (2005). Origin of the high permittivity in (La0.4Ba0.4Ca0.2)(Mn0.4Ti0.6)O-3 ceramics. Journal of Applied Physics, 98 (8), 084101-084101-6.

LI, Ming, FETEIRA, Antonio and SINCLAIR, Derek C. (2009). Relaxor ferroelectric-like high effective permittivity in leaky dielectrics/oxide semiconductors induced by electrode effects: A case study of CuO ceramics. Journal of Applied Physics, 105 (11), p. 114109.

LI, Ming, FETEIRA, Antonio, SINCLAIR, Derek C. and WEST, Anthony R. (2007). Incipient ferroelectricity and microwave dielectric resonance properties of CaCu[sub 2.85]Mn[sub 0.15]Ti[sub 4]O[sub 12] ceramics. Applied Physics Letters, 91 (13), p. 132911.

LI, Ming, FETEIRA, Antonio, SINCLAIR, Derek C. and WEST, Anthony R. (2006). Influence of Mn doping on the semiconducting properties of CaCu3Ti4O12 ceramics. Applied Physics Letters, 88 (23), p. 232903.

LI, Ming, SHEN, Zhijian, NYGREN, Mats, FETEIRA, Antonio, SINCLAIR, Derek C. and WEST, Anthony R. (2009). Origin(s) of the apparent high permittivity in CaCu[sub 3]Ti[sub 4]O[sub 12] ceramics: clarification on the contributions from internal barrier layer capacitor and sample-electrode contact effects. Journal of Applied Physics, 106 (10), p. 104106.

LISHCHUK, S. V. (2005). Equation of state of the hard-disk fluid on a sphere from Percus–Yevick equation. Physica A Statistical Mechanics and its Applications, 369 (2), 266-274.

LISHCHUK, S. V. (2002). Lekner summation of dipolar interaction in quasi-two-dimensional simulations. Molecular Physics, 100 (24), 3789-3793.

LISHCHUK, S. V. (2008). Saddle-splay modulus of a particle-laden fluid interface for hard disks. Europhysics Letters, 85 (5), p. 56001.

LISHCHUK, S. V. (2009). Scattering of light on surfactant-laden liquid-liquid crystal interface. Chemical Engineering Communications, 196 (7), 854-871.

LISHCHUK, S. V. (2009). Self-consistent field theory simulation of block copolymer films adsorbed on surfaces of azimuthally symmetric particles. Journal of Physics A: Mathematical and General, 42 (46), p. 465401.

LISHCHUK, S. V. (2007). Waves at surfactant-laden liquid-liquid crystal interface. Physical Review E (PRE), 76 (1), 011711.

LISHCHUK, S. V. and CARE, C. M. (2006). A deformable elastic membrane embedded in a lattice Boltzmann fluid. arXiv:cond-mat/0607382v1. (Unpublished)

LISHCHUK, S. V. and HALLIDAY, I. (2009). Effective surface viscosities of a particle-laden fluid interface. Physical review E. Statistical, nonlinear and soft matter physics, 80 (1), 016306.

LISHCHUK, S. V., LOKOTOSH, T. V., MAGAZU', S., MALOMUZH, N. P. and MIGLIARDO, F. (2007). Role of orientation disorder in the formation of fragility of glassy water and glycerol-like liquids. Physical Review E (PRE), 76 (6), 061504.

LISHCHUK, S. V., LOKOTOSH, T. V. and MALOMUZH, N. P. (2004). Properties of the H-bond network for two-dimensional lattice water model. Journal of Chemical Physics, 122 (24), p. 244504.

LISHCHUK, S. V., MALOMUZH, N. P. and MAKHLAICHUK, P. V. (2010). Why thermodynamic properties of normal and heavy water are similar to those of argon-like liquids? Physics letters A, 374 (19-20), 2084-2088.

file
LISHCHUK, S. V., AKID, R. and WORDEN, K. (2008). Model-based prognosis for intergranular corrosion. Proc. 4th European Workshop on Structural Health Monitoring, Krakow, Poland, 340-348.

file
LISHCHUK, S. V., AKID, R. and WORDEN, K. (2008). A cellular automaton based model for predicting intergranular corrosion in aerospace alloys. Proc. EUROCORR–2008, Edinburgh, UK.

LUISMAN, Luke, FETEIRA, Antonio and REICHMANN, Klaus (2011). Weak-relaxor behaviour in Bi/Yb-doped KNbO3 ceramics. Applied Physics Letters, 99 (19), p. 192901.

MATIKAS, T.E. and HASAN, Syed (2011). Deformation characteristics of aluminium composites for structural applications. In: AHMAD, Zaki, (ed.) Recent trends in processing and degradation of aluminium alloys. InTech, 347-370.

MAY, M., WANG, Heming and AKID, Robert (2010). Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol–gel epoxy system. International Journal of Adhesion and Adhesives, 30 (6), p. 505.

MAY, Mousa, WANG, Heming and AKID, Robert (2012). Bond strength of hybrid sol–gel coatings with different additives. Journal of Coatings Technology and Research. (In Press)

MCGANN, O.J., BINGHAM, Paul, HAND, R.J., GANDY, A.S., KAVČIČ, M., ŽITNIK, M., BUČAR, K., EDGE, R. and HYATT, N.C. (2012). The effects of γ-radiation on model vitreous wasteforms intended for the disposal of intermediate and high level radioactive wastes in the United Kingdom. Journal of Nuclear Materials, 429 (1-3), 353-367.

MIRANDA, Laura, BOULAHYA, Khalid, VARELA, Aurea, GONZÁLEZ-CALBET, José M., PARRAS, Marina, HERNANDO, María, FERNÁNDEZ-DÍAZ, M. Teresa, FETEIRA, Antonio and SINCLAIR, Derek C. (2007). Structure−property relationships of the 10H Hexagonal-Type Perovskite BaMn0.4Fe0.6O2.73. Chemistry of Materials, 19 (14), 3425-3432.

MIRANDA, Laura, FETEIRA, Antonio, SINCLAIR, Derek C, BOULAHYA, Khalid, HERNANDO, Maria, RAMÍREZ, Julio, VARELA, Aurea, GONZÁLEZ-CALBET, Jose M. and PARRAS, Marina (2009). Composition−structure−property relationships of 6H- and 12R-Type Hexagonal Ba(Mn,Ti)O3−δPerovskites. Chemistry of Materials, 21 (8), 1731-1742.

MIRANDA, Laura, FETEIRA, Antonio, SINCLAIR, Derek C., HERNÁNDEZ, Mar García, BOULAHYA, Khalid, HERNANDO, María, VARELA, Aurea, GONZÁLEZ-CALBET, Jose M. and PARRAS, Marina (2008). Study of the structural, magnetic, and electrical properties of the 5H Hexagonal-Type Perovskite BaMn0.2Co0.8O2.80. Chemistry of Materials, 20 (8), 2818-2828.

MOREIRA, R L, FETEIRA, Antonio and DIAS, A (2005). Raman and infrared spectroscopic investigations on the crystal structure and phonon modes of LaYbO3 ceramics. Journal of Physics - Condensed Matter, 17 (17), 2775-2781.

MURTAZA, G. and AKID, R. (2000). Empirical corrosion fatigue life prediction models of a high strength steel. Engineering Fracture Mechanics, 67 (5), 461-474.

MYRIOUNIS, Dimitrios (2011). Fracture toughness of MMCs subjected to heat treatment - NDE. In: Second Greek=Ukranian Conference on Fracture Mechanics of Materials and Structures, Lviv, Ukraine, 3-7 October 2011. (Unpublished)

MYRIOUNIS, Dimitrios (2013). Microdeformation Behaviour of Al/SiCp Composites. LAP LAMBERT Academic Publishing.

MYRIOUNIS, Dimitrios (2007). Microdeformation behaviour of Al-SiC metal matrix composites. In: 9th International Conference on Deformation & Fracture of Composites (DFC9), University of Sheffield, UK, 11-13 April 2007. (Unpublished)

MYRIOUNIS, Dimitrios (2007). Role of interfacial properties on the mechanical behaviour of Al-Sic metal-matrix composites. In: ICSAM 2007 - International Conference on Structural Analysis of Advanced Materials, Pathras, greece, 2-6 September 2007. (Unpublished)

MYRIOUNIS, Dimitrios (2010). Role of interfacial properties on the mechanical behaviour of Al/SiCp composites. In: IIMM 2010 : International Conference on Interfaces and Interphases in Multicomponent Materials, University of Sheffield, Sheffield, 1-3 September 2010. (Unpublished)

MYRIOUNIS, Dimitrios (2006). Role of segregation and precipitates of interfacial strengthening mechanism in Al-Sic MMC. In: Multiphase Materials, Knowledge Based Materials : Marie Cure Summer School, Sweden, 14-23 August 2006. (Unpublished)

MYRIOUNIS, Dimitrios, HASAN, S. T. and MATIKAS, T. E. (2008). Influence of processing conditions on the micro-mechanical properties of particulate-reinforced aluminium matrix composites. Advanced composites letters, 17 (3), 75-85.

MYRIOUNIS, Dimitrios, HASAN, S. T. and MATIKAS, T. E. (2008). Microdeformationn behaviour of Al-SiC metal matrix composites. Composite Interfaces, 15 (5), 495-514.

MYRIOUNIS, Dimitrios and HASAN, Syed (2011). Fatigue and fracture behaviour of Al-SiCp MMC NDE by IR detection. In: ICCM 18. the International Conference on Composite Materials, Jeju Island, Korea, 21-26 August 2011. (Unpublished)

MYRIOUNIS, Dimitrios and HASAN, Syed (2012). Fatigue behaviour of Al/Al203 metal matrix composites. In: ECF19 - 19th European Conference on Fracture, Kazan Scientific Centre of the Russian Academy of Sciences, Kazan, Russia, 26-31 August 2012. (Unpublished)

MYRIOUNIS, Dimitrios and HASAN, Syed (2011). Fatigue crack growth behaviour of Al/SiC metal matrix composite. In: Deformation and Fracture of Composites (DFC-11) & Structural Integrity and Multi-scale Modelling (SI-5) : Celebrating 20 Years of DFC, A Joint Sheffield-Cambridge Conference, Queens' College Cambridge, 12-15 April 2011. (Unpublished)

MYRIOUNIS, Dimitrios and HASAN, Syed (2011). Fatigue life estimation of aluminium alloy reinforced with SiC particulates in annealed conditions. In: ICCM 18. the International Conference on Composite Materials, Jeju Island, Korea, 21-26 August 2011. (Unpublished)

MYRIOUNIS, Dimitrios, HASAN, Syed and BARE, T (2011). Fracture toughness behaviour of Aluminium 5xxx alloys - NDE by heatwave detection. In: 14th International Conference on Advances in Materials and Processing Technologies (AMPT 2011), Istanbul, Turkey, 13-16th July 2011. (Unpublished)

MYRIOUNIS, Dimitrios, HASAN, Syed, BARKOULA, N.M., PAIPETIS, A. and MATIKAS, T.E. (2009). Effects of heat treatment on microstructure and the fracture toughness of SiCp/Al alloy metal matrix composites. Journal of advanced materials, 4 (3), 18-27.

MYRIOUNIS, Dimitrios, HASAN, Syed and MATIKAS, T. E. (2008). Heat treatment and interface effects on the mechanical behavior of SiC-particle reinforced aluminium matrix composites. Journal of ASTM International, 5 (7).

MYRIOUNIS, Dimitrios, HASAN, Syed and MATIKAS, T. E. (2010). Predicting interfacial strengthening behaviour of particulate-reinforced MMC : a micro-mechanistic approach. Composite Interfaces, 17 (4), 347-355.

MYRIOUNIS, Dimitrios, HASAN, Syed and MATIKAS, T.E. (2008). Interfacial tailoring for the improvement of fatigue properties in SiC particulate reinforced aluminium matrix composites-NDE by heat wave detection. In: ECCM13 : 13th European Conference on Composite Materials, Royal Institute of Technology (KTH), Stockholm, Sweden, 2 - 5 June 2008. (Unpublished)

MYRIOUNIS, Dimitrios, KORDATOS, E. Z., HASAN, Syed and MATIKAS, T. E. (2010). Crack-tip stress field and fatigue crack growth monitoring using infrared lock-in thermography in A359/SiCp composites. Strain, 47 (Supp 1), e619-e627.

MYRIOUNIS, Dimitrios, MATIKAS, T. E. and HASAN, Syed (2012). Fatigue behaviour of SiC particulate-reinforced A359 aluminium matrix composites. Strain, 48 (4), 333-341.

MYRIOUNIS, Dimitrios, MATIKAS, T.E. and HASAN, Syed (2007). Microdeformation behaviour of Al-SiC metal matrix composite. In: COMP07 : omposites and applications for the new millennium : 6th International Symposium on Advanced Composites, Corfu Imperial Hotel, 16-18 May 2007. (Unpublished)

MÖBUS, G, TSAI, J, XU, XJ, BINGHAM, Paul and YANG, G (2008). Nanobead formation and nanopatterning in glasses. Microscopy and Microanalysis, 14 (S2), 434-435.

NASSER, M.A., HASAN, Syed and MYRIOUNIS, Dimitrios (2011). Numerical modelling analysis of isothermal fatigue. In: National Student Conference in Metallic Materials 2011, Halifax Hall, The Endcliffe Village, Sheffield, 20 June 2011. (Unpublished)

PASHA, U. M., ZHENG, H., THAKUR, O. P., FETEIRA, Antonio, WHITTLE, K. R., SINCLAIR, D. C. and REANEY, I. M. (2007). In situ Raman spectroscopy of A-site doped barium titanate. Applied Physics Letters, 91 (6), 062908.

PETROYIANNIS, P. V., KERMANIDIS, A. T., AKID, R., RODOPOULOS, C. A. and PANTELAKIS, S. G. (2005). Analysis of the effects of exfoliation corrosion on the fatigue behaviour of the 2024-T351 aluminium alloy using the fatigue damage map. International Journal of Fatigue, 27 (7), 817-827.

PUNN, Rita, FETEIRA, Antonio, SINCLAIR, Derek C. and GREAVES, Colin (2006). Enhanced oxide ion conductivity in stabilized δ-Bi2O3. Journal of the American Chemical Society, 128 (48), 15386-15387.

RAWAL, Ritesh, FETEIRA, Antonio, FLORES, Alberto Arenas, HYATT, Neil C., WEST, Anthony R., SINCLAIR, Derek C., SARMA, Kumaravinothan and ALFORD, Neil McN. (2006). Dielectric properties of the "Twinned" 8H-Hexagonal Perovskite Ba8Nb4Ti3O24. Journal of the American Ceramic Society, 89 (1), 336-339.

RAWAL, Ritesh, FETEIRA, Antonio, HYATT, Neil C., SINCLAIR, Derek C., SARMA, Kumaravinothan and ALFORD, Neil McN. (2006). Microwave dielectric properties of hexagonal 12R-Ba3LaNb3O12 ceramics. Journal of the American Ceramic Society, 89 (1), 332-335.

RAWAL, Ritesh, MCQUEEN, Andrew J., GILLIE, Lisa J., HYATT, Neil C., MCCABE, Emma E, SAMARA, Kumaravinothan, ALFORD, Neil McN., FETEIRA, Antonio, REANEY, Ian M. and SINCLAIR, Derek C. (2009). Influence of octahedral tilting on the microwave dielectric properties of A[sub 3]LaNb[sub 3]O[sub 12] hexagonal perovskites (A=Ba, Sr). Applied Physics Letters, 94 (19), p. 192904.

RAY, B. C., HASAN, S. T. and CLEGG, D. W. (2003). Effect of thermal shock on modulus of thermally and cryogenically conditioned Kevlar/polyester composites. Journal of materials science letters, 22 (3), 203-204.

RAY, B. C., HASAN, S. T. and CLEGG, D. W. (2007). Evaluation of defects in FRP composites by NDT techniques. Journal of Reinforced Plastics and Composites, 26 (12), 1187-1192.

REANEY, I M, IQBAL, Y, ZHENG, H, FETEIRA, Antonio, HUGHES, H, IDDLES, D, MUIR, D and PRICE, T (2005). Order-disorder behaviour in 0.9Ba([Zn0.60Co0.40](1/3)Nb-2/3)O-3-0.1Ba(Ga0.5Ta0.5)O-3 microwave dielectric resonators. Journal of the European Ceramic Society, 25 (7), 1183-1189.

REICHMANN, Klaus, KRAUSS, Werner, SCHUETZ, Denis, NADERER, Michael, DELUCA, Marco, SUPANCIC, P, FETEIRA, Antonio and KAINZ, Theresa (2013). Bismuth-Alkali-Titanate based ceramics for piezoelectric actuator applications. In: Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2013, Orlando, USA, 23-26th April 2013. (Unpublished)

REICHMANN, Klaus, SCHUTZ, Denis, DELUCA, Marco and FETEIRA, Antonio (2012). Lone-pair effect in Bismuth Sodium Titanate based ceramics investigated by temperature dependent Raman spectrometry. In: International Workshop on Relaxor Ferroelectrics, Schloss Edesheim, Germany, 7-11th October 2012. (Unpublished)

SCHILEO, G, DIAS, A, MOREIRA, RL, JACKSON, TJ, SMITH, PA, CHUNG, KTS and FETEIRA, Antonio (2012). Structure and microwave dielectric properties of low firing Bi2Te2W3O16 ceramics. Journal of the American Ceramic Society. (Submitted)

SCHILEO, Giorgio, FETEIRA, Antonio, POSTOLACHE, Petronel, LILIANA, Mitoseriu and REICHMANN, Klaus (2013). Synthesis and characterization of novel multiferroic composites based on Y3Fe5O12@BaTiO3 and Y3Fe5O12@Pb(Zr,Ti)O3. In: Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2013), Orlando, USA, 23-26th April 2013. (Unpublished)

SCHILEO, Giorgio, FETEIRA, Antonio and REICHMANN, Klaus (2013). Synthesis and Characterization of Core-Shell Multiferroic Nanocomposites Based on Y3Fe5O12 and BaTiO3/Pb(Zr,Ti)O3. In: Ferroelectrics UK 2013, Sheffield, 17-18th January 2013. (Unpublished)

SCHILEO, Giorgio, FETEIRA, Antonio, SHIMIZU, T and REICHMANN, Klaus (2013). Synthesis and characterization of multiferroic ceramic composites based on Y3Fe5O12/BaTiO3 and Y3Fe5O12/Pb(Zr,Ti)O3. In: Materials Science and Technology 2013, Montreal, Canada, 27-31 October 2013. (Unpublished)

SCHILEO, Giorgio, LUISMAN, Luke, FETEIRA, Antonio, DELUCA, Marco and REICHMANN, Klaus (2013). Structure-property relationships in BaTiO3-BiFeO3-BiYbO3 ceramics. Journal of the European Ceramic Society, 33 (8), 1457-1468.

SCHMITT, C., PLUVINAGE, G., HADJ-TAIEB, E. and AKID, R. (2006). Water pipeline failure due to water hammer effects. Fatigue and fracture of engineering materials and structures, 29 (12), 1075-1082.

SCHOFIELD, J.M., BINGHAM, Paul and HAND., R.J. (2009). The immobilisation of a chloride containing actinide waste surrogate in calcium aluminosilicate glasses. In: COZZI, Alex and OHJI, Tatsuki, (eds.) Environmental Issues and Waste Management Technologies in the Materials and Nuclear Industries XII. Ceramic Transactions (207). Wiley, 69-80.

SCHOFIELD, James M., BINGHAM, Paul and HAND, Russell J. (2008). Waste loading of actinide chloride surrogates in an iron phosphate glass. MRS Proceedings, 1107, 253-260.

SCHUTZ, Denis, DELUCA, Marco, KRAUSS, Werner, FETEIRA, Antonio and REICHMANN, Klaus (2012). Lone pair-induced covalency as the cause of temperature and field induced instabilities in Bismuth sodium titanate. In: Nature materials conference: Frontiers in Electronic materials: correlation effects and memristive phenomena, Aachen, 17-20 June 2012. (Unpublished)

SETH, Sampan, JONES, Hywel and LEWIS, Oliver (2013). Wear resistance performance of thermally sprayed Al-Ti alloy measured by three body micro-scale abrasive wear test. Wear, 302 (1-2), 972-980.

SETH, Sampan, LEWIS, Oliver, JONES, Alan Hywel, STEPHENSON, Daniel, BODEN, Marcela and THISTLETHWAITE, Stuart (2012). A study of corrosion and wear resistance performance of thermally sprayed Al-Zn-In and Al-Ti alloy coatings. In: 53rd Corrosion Science Symposium, National Physical Laboratory, Teddington, UK, 6-7 September 2012. (Unpublished)

STRATHDEE, Tamsin, LUISMAN, Luke, FETEIRA, Antonio and REICHMANN, Klaus (2011). Ferroelectric-to-relaxor Crossover in (1-x) BaTiO3-xBiYbO3 (0≤ x≤ 0.08) ceramics. Journal of the American Ceramic Society, 94 (8), 2292-2295.

SULEIMAN, R, KHALED, M, WANG, Heming, SMITH, T J, GITTENS, J, AKID, R, MOHAMED EL ALI, B and KHALIL, A (2014). Comparison of selected inhibitor doped sol–gel coating systems for protection of mild steel. Corrosion engineering science and technology, 49 (3), 189-196.

TAN, Chaou, FETEIRA, Antonio and SINCLAIR, Derek (2012). Ba2Bi1.4Nb0.6O6: a nonferroelectric, high permittivity oxide. Chemistry of Materials, 24 (12), 2247-2249.

THAKUR, O.P., FETEIRA, Antonio, KUNDYS, B. and SINCLAIR, D.C. (2007). Influence of attrition milling on the electrical properties of undoped-BaTiO3. Journal of the European Ceramic Society, 27 (7), 2577-2589.

VARGHESE, Jobin, JOSEPH, Tony, SEBASTIAN, Mailadil Thomas, REEVES-MCLAREN, Nik and FETEIRA, Antonio (2010). Crystal structure and microwave dielectric properties of LaLuO3 ceramics. Journal of the American Ceramic Society, 93 (10), 2960-2963.

VERMA, B. B., ATKINSON, J. D. and KUMAR, M. (2001). Study of fatigue behaviour of 7475 aluminium alloy. Bulletin of Materials Science, 24 (2), p. 231.

VIKAS, Kumar and WANG, Heming (2013). Selection of metal substrates for completely solution-processed inverted organic photovoltaic devices. Solar Energy Materials and Solar Cells, 113, 179-185.

VOLOTINEN, T.T., PARKER, J.M. and BINGHAM, Paul (2008). Concentrations and site partitioning of Fe2+ and Fe3+ ions in a soda-lime-silica glass obtained by optical absorbance spectroscopy. Physics and Chemistry of Glasses, 49 (5), 258-270.

WALLENBERGER, Frederick T. and BINGHAM, Paul (2009). Fiberglass and glass technology : energy-friendly compositions and applications. Springer.

WANG, H. and AKID, R. (2008). Encapsulated cerium nitrate inhibitors to provide high-performance anti-corrosion sol-gel coatings on mild steel. Corrosion Science, 50 (4), 1142-1148.

WANG, H. and AKID, R. (2007). A room temperature cured sol-gel anticorrosion pre-treatment for Al 2024-T3 alloys. Corrosion science, 49 (12), 4491-4503.

WANG, H., AKID, R. and GOBARA, M. (2010). Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route. Corrosion Science, 52 (8), 2565-2570.

WANG, H., HUANG, Y. Z., RODENBURG, J. M. and SIMMONDS, M. C. (2003). Synthesis of nanosize powders and thin films of Yb-doped YAG by sol-gel methods. Chemistry of materials, 15 (18), 3474-3480.

WANG, H., SIMMONDS, M. C. and RODENBURG, J. M. (2002). Manufacturing of YbAG coatings and crystallisation of the pure and Li2O doped Yb2O3-Al2O3 system by a modified sol-gel method. Materials chemistry and physics, 77 (3), 802-807.

WANG, Y. Z., AKID, R., CLARKE, A. and ATKINSON, J. D. (1996). Further observations of early fatigue crack development. Fatigue and fracture of engineering materials and structures, 19 (5), 623-627.

WANG, Y. Z., ATKINSON, J., AKID, R. and PARKINS, R. N. (1996). Crack interaction, coalescence and mixed mode fracture mechanics. Fatigue & Fracture Of Engineering Materials And Structures, 19 (1), 51-63.

WRIGHT, AdrianC., SINCLAIR, Roger N., SHAW, Joanna L., HAWORTH, Richard, MARASINGHE, G.Kanishka, DAY, Delbert E., BINGHAM, Paul, FORDER, Susan D., CUELLO, Gabriel J. and FISCHER, Henry J. (2012). The atomic and magnetic structure and dynamics of iron phosphate glasses. Physics and Chemistry of Glasses, 53 (6), 227-244.

XU, H., AKID, R. and BRUMPTON, G. (2004). Surface characterisation studies of CrVI and CrIII electroplated carbon steel samples. Transactions of the Institute of Metal Finishing, 82, 18-23.

XU, H., AKID, R., BRUMPTON, G., WANG, H. and RODENBURG, J. M. (2004). Electrochemical and AFM/SEM studies of Ni-Cr electroplated and sol-gel coated samples. In: MCVITIE, S. and MCCOMB, D., (eds.) Electron Microscopy and Analysis 2003. Institute of Physics Conference Series (179). CRC Press, 417-420.

YANG, G., MOBUS, G., BINGHAM, Paul and HAND, R.J. (2009). Electron beam induced structure changes in borosilicate and borophosphate glasses: a comparison by energy loss spectroscopy. Physics and Chemistry of Glasses, 50 (6), 378-383.

ZHANG, Lei, THAKUR, Om Prakash, FETEIRA, Antonio, KEITH, Gillian M., MOULD, Andrew G., SINCLAIR, Derek C. and WEST, Anthony R. (2007). Comment on the use of calcium as a dopant in X8R BaTiO[sub 3]-based ceramics. Applied Physics Letters, 90 (14), p. 142914.

ZHANG, Lwi, BEN, Liubin, THAKUR, Om Prakash, FETEIRA, Antonio, MOULD, Andrew G., SINCLAIR, Derek C. and WEST, Anthony R. (2008). Ferroelectric aging and recoverable electrostrain in BaTi0.98Ca0.02O2.98 ceramics. Journal of the American Ceramic Society, 91 (9), 3101-3104.

ZHOU, Changrong, FETEIRA, Antonio, SHAN, Xu, YANG , Huabin, ZHOU, Qin, CHENG, Jun, LI, Weizhou and WANG, Hua (2012). Remarkably high-temperature stable piezoelectric properties of Bi(Mg0.5Ti0.5)O3 modified BiFeO3-BaTiO3 ceramics. Applied Physics Letters, 101 (3), 032901.

This list was generated on Tue Sep 16 14:28:17 2014 IST.