Prediction of cutting forces in orthogonal machining.

LAHRECHE, Tahar. (1987). Prediction of cutting forces in orthogonal machining. Masters, Sheffield Hallam University (United Kingdom)..

[img]
Preview
PDF (Version of Record)
10697242.pdf - Accepted Version
All rights reserved.

Download (8MB) | Preview

Abstract

In this investigation two methods of machining analysis have been used to make predictions of cutting forces from a knowledge of the workpiece material flowstress and the cutting conditions. The first method of the analysis is used withthree different materials namely EN8, Aluminium and 70-30 Brass. In thisanalysis the work material flow stress is obtained from a simple quasi-static compression test where the effects of temperature and strain rate are considered to be negligible. Predicted results for the cutting forces obtained from the first method of analysis were compared with experimental results. The comparisonof predicted results with experimental results shows only limited agreement.In order to improve the agreement between experimental and predicted results the machining model was improved by the inclusion of flow stress properties obtained from high speed compression tests. In addition the effect oftemperature on the flow stress was allowed for by the use of the velocity modified temperature concept. An excellent agreement is shown between predicted cutting forces obtained from the improved model of machining, with the cutting forces obtained by experiment.Conclusions are drawn and suggestions for further work are made.

Item Type: Thesis (Masters)
Additional Information: Thesis (M.Phil.)--Sheffield Hallam University (United Kingdom), 1987.
Research Institute, Centre or Group - Does NOT include content added after October 2018: Sheffield Hallam Doctoral Theses
Depositing User: EPrints Services
Date Deposited: 10 Apr 2018 17:20
Last Modified: 26 Apr 2021 12:00
URI: https://shura.shu.ac.uk/id/eprint/19936

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics