Segregation of Mn, Si, Al, and oxygen during the friction stir welding of DH36 steel

ALMOUSSAWI, M., SMITH, Alan, FARAJI, M. and CATER, S. (2017). Segregation of Mn, Si, Al, and oxygen during the friction stir welding of DH36 steel. Metallography, Microstructure, and Analysis. (In Press)

[img]
Preview
PDF
Smith-SegregationofMnSiAlandOxygen(VoR).pdf - Published Version
Available under License Creative Commons Attribution.

Download (2MB) | Preview
Official URL: https://link.springer.com/article/10.1007%2Fs13632...
Link to published version:: 10.1007/s13632-017-0401-6

Abstract

This work investigates the role of welding speed in elemental segregation of Mn, Si, Al, and oxygen during friction stir welding (FSW) in DH36 steel. The experimental work undertaken showed that when the speed of the FSW process exceeds 500 RPM with a traverse speed of 400 mm/min, then elemental segregation of Mn, Si, Al, and O occurred. The mechanism of this segregation is not fully understood; additionally, the presence of oxygen within these segregated elements needs investigation. This work examines the elemental segregation within DH36 steel by conducting heat treatment experiments on unwelded samples incrementally in the range of 1200–1500 °C and at cooling rates similar to that in FSW process. The results of heat treatments were compared with samples welded under two extremes of weld tool speeds, namely W1 low tool speeds (200 RPM with traverse speed of 100 mm/min) and W2 high tool speeds (550 RPM with traverse speed of 400 mm/min). The results from the heat treatment trials showed that segregation commences when the temperature exceeds 1400 °C and Mn, Si, Al, and oxygen segregation progress occurs at 1450 °C and at a cooling rate associated with acicular ferrite formation. It was also found that high rotational speeds exceeding 500 RPM caused localized melting at the advancing-trailing side of the friction stir-welded samples. The study aims to estimate peak temperature limits at which elemental segregation does not occur and hence prevent their occurrence in practice by applying the findings to the tool’s rotational and traverse speed that correspond to the defined temperature.

Item Type: Article
Uncontrolled Keywords: Friction stir welding, DH36 steel, Elemental segregation
Identification Number: 10.1007/s13632-017-0401-6
Depositing User: Jill Hazard
Date Deposited: 17 Nov 2017 12:46
Last Modified: 17 Nov 2017 15:16
URI: http://shura.shu.ac.uk/id/eprint/17354

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics