Items where SHU Author is "Akid, Robert"

Up a level
Export as [feed] RSS
Group by: Item Type | Full Text | No Grouping
Jump to: None | Public
Number of items: 36.

None

MAY, Mousa , WANG, Heming and AKID, Robert (2013). Bond strength of hybrid sol–gel coatings with different additives. Journal of Coatings Technology and Research, 10 (3), 407-413.

HERRERO-HERNANDEZ, E, SMITH, Thomas and AKID, Robert (2013). Electricity generation from wastewaters with starch as carbon source using a mediatorless microbial fuel cell. Biosensors and Bioelectronics, 39 (1), 194-198.

LEIVA-GARCÍA, R., AKID, Robert, GREENFIELD, David, GITTENS, Jeanette, MUÑOZ-PORTERO, M.J. and GARCÍA-ANTÓN, J. (2012). Study of the sensitisation of a highly alloyed austenitic stainless steel, Alloy 926 (UNS N08926), by means of scanning electrochemical microscopy. Electrochimica Acta, 70, 105-111.

DODDS, Stephen, SMITH, Thomas Smith, AKID, Robert, STEPHENSON, J, NICHOL, Tim, BANERJEE, RD, STOCKLEY, I and TOWNSEND, R (2011). Contrasting effects of physical wear on elution of two antibiotics from orthopaedic cement. Antimicrobial Agents and Chemotherapy, 56 (3), 1471-1475.

AKID, R., GOBARA, M. and WANG, H. (2011). Corrosion protection performance of novel hybrid polyaniline/sol–gel coatings on an aluminium 2024 alloy in neutral, alkaline and acidic solutions. Electrochimica Acta, 56 (5), 2483-2492.

LEWIS, O. D., GREENFIELD, D., AKID, R., DAHM, R. H. and WILCOX, G. D. (2010). Conversion coatings for zinc electrodeposits from modified molybdate solutions. Transactions of the Institute of Metal Finishing, 88 (2), 107-116.

MAY, M., WANG, Heming and AKID, Robert (2010). Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol–gel epoxy system. International Journal of Adhesion and Adhesives, 30 (6), p. 505.

LI, Shu-Xin, LI, Lei, YU, Shu-Rong, AKID, Robert and XIA, Hong-Bo (2010). Investigation of intergranular corrosion of 316L stainless steel diffusion bonded joint by electrochemical potentiokinetic reactivation. Corrosion Science.

WANG, H., AKID, R. and GOBARA, M. (2010). Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route. Corrosion Science, 52 (8), 2565-2570.

GITTENS, J. E., WANG, H., SMITH, T. J., AKID, R. and GREENFIELD, D. (2009). Biotic sol-gel coating for the inhibition of corrosion in seawater. ECS transactions, 24 (1), 211-229.

AKID, R., WANG, H., SMITH, T. J., GREENFIELD, D. and EARTHMAN, J. C. (2008). Biological functionalization of a sol-gel coating for the mitigation of microbial-induced corrosion. Advanced functional materials, 18 (2), 203-211.

WANG, H. and AKID, R. (2008). Encapsulated cerium nitrate inhibitors to provide high-performance anti-corrosion sol-gel coatings on mild steel. Corrosion Science, 50 (4), 1142-1148.

KRAWIEC, H., VIGNAL, V. and AKID, R. (2008). Numerical modelling of the electrochemical behaviour of 316 stainless steel based upon static and dynamic experimental microcapillary-based techniques: effect of electrolyte flow and capillary size. Surface and Interface Analysis, 40 (3-4), 315-319.

KRAWIEC, H., VIGNAL, V. and AKID, R. (2008). Numerical modelling of the electrochemical behaviour of 316L stainless steel based upon static and dynamic experimental microcapillary-based techniques. Electrochimica Acta, 53 (16), 5252-5259.

AKID, R. and WANG, H. (2008). Protective developments - Sol-gel systems show promise in antifouling and anticorrosive systems. European Coatings Journal, 5, 24-28.

LARROUMET, D., GREENFIELD, D., AKID, R. and YARWOOD, J. (2008). Spectroscopic studies of the corrosion of model iron electrodes in carbonate and phosphate buffer solutions. Journal of Raman Spectroscopy, 39 (12), 1740-1748.

AKID, R. (2007). Hybrid sol gel coatings are customized to fight corrosion. Materials performance, 46 (11), 14-15.

LARROUMET, D., GREENFIELD, D., AKID, R. and YARWOOD, J. (2007). Raman spectroscopic studies of the corrosion of model iron electrodes in sodium chloride solution. Journal of Raman Spectroscopy, 38 (12), 1577-1585.

AKID, Robert, DMYTRAKH, I. M. and GONZALEZ-SANCHEZ, J. (2006). Fatigue damage accumulation: the role of corrosion on the early stages of crack development. Corrosion engineering science and technology, 41 (4), 328-335.

AKID, R. and WANG, H. (2006). Application of sol-gel technology for anticorrosion coatings and surface pretreatments. Galvanotechnik, 97 (9), 2098-2109.

LEWIS, O. D., GREENFIELD, D., AKID, R., DAHM, R. H. and WILCOX, G. W. (2006). SVET investigation into use of simple molybdate passivation treatments on electrodeposited zinc coatings. Transactions of the Institute of Metal Finishing, 84 (4), 188-195.

AKID, R. and WANG, H. (2006). Sol-gel coatings: an alternative corrosion protection system. Corrosion Management (May/June), 9-12.

SCHMITT, C., PLUVINAGE, G., HADJ-TAIEB, E. and AKID, R. (2006). Water pipeline failure due to water hammer effects. Fatigue and fracture of engineering materials and structures, 29 (12), 1075-1082.

AKID, Robert, HOVSEPIAN, Papken and KOK, Y. N. (2005). Tribocorrosion testing of stainless steel (SS) and PVD coated SS using a modified scanning reference electrode technique. Wear, 259 (7-12), 1472-1481.

PETROYIANNIS, P. V., KERMANIDIS, A. T., AKID, R., RODOPOULOS, C. A. and PANTELAKIS, S. G. (2005). Analysis of the effects of exfoliation corrosion on the fatigue behaviour of the 2024-T351 aluminium alloy using the fatigue damage map. International Journal of Fatigue, 27 (7), 817-827.

AKID, Robert and GARMA, M. (2004). Scanning vibrating reference electrode technique: a calibration study to evaluate the optimum operating parameters for maximum signal detection of point source activity. Electrochimica acta, 49 (17-18), 2871-2879.

XU, H., AKID, R., BRUMPTON, G., WANG, H. and RODENBURG, J. M. (2004). Electrochemical and AFM/SEM studies of Ni-Cr electroplated and sol-gel coated samples. In: MCVITIE, S. and MCCOMB, D., (eds.) Electron Microscopy and Analysis 2003. Institute of Physics Conference Series (179). CRC Press, 417-420.

XU, H., AKID, R. and BRUMPTON, G. (2004). Surface characterisation studies of CrVI and CrIII electroplated carbon steel samples. Transactions of the Institute of Metal Finishing, 82, 18-23.

AKID, Robert and MILLS, D. J. (2001). A comparison between conventional macroscopic and novel microscopic scanning electrochemical methods to evaluate galvanic corrosion. Corrosion science, 43 (7), 1203-1216.

HU, H. and AKID, R. (2001). Cathodic-polarization effects on the long/short corrosion-fatigue crack growth rate of an offshore steel. Materials science, 37 (6), 902-909.

MURTAZA, G. and AKID, R. (2000). Empirical corrosion fatigue life prediction models of a high strength steel. Engineering Fracture Mechanics, 67 (5), 461-474.

BREEN, C., AKID, R., HABESCH, S. and SAMMON, C. (2000). How clean is clean? Materials World, 8 (4), 15-17.

WANG, Y. Z., ATKINSON, J., AKID, R. and PARKINS, R. N. (1996). Crack interaction, coalescence and mixed mode fracture mechanics. Fatigue & Fracture Of Engineering Materials And Structures, 19 (1), 51-63.

WANG, Y. Z., AKID, R., CLARKE, A. and ATKINSON, J. D. (1996). Further observations of early fatigue crack development. Fatigue and fracture of engineering materials and structures, 19 (5), 623-627.

Public

file
LISHCHUK, S. V., AKID, R. and WORDEN, K. (2008). Model-based prognosis for intergranular corrosion. Proc. 4th European Workshop on Structural Health Monitoring, Krakow, Poland, 340-348.

file
LISHCHUK, S. V., AKID, R. and WORDEN, K. (2008). A cellular automaton based model for predicting intergranular corrosion in aerospace alloys. Proc. EUROCORR–2008, Edinburgh, UK.

This list was generated on Thu Sep 3 00:36:38 2015 UTC.