Items where SHU Author is "Akid, Robert"

Up a level
Export as [feed] RSS
Group by: Item Type | Full Text | No Grouping
Number of items: 36.

HERRERO-HERNANDEZ, E, SMITH, Thomas and AKID, Robert (2013). Electricity generation from wastewaters with starch as carbon source using a mediatorless microbial fuel cell. Biosensors and Bioelectronics, 39 (1), 194-198.

MAY, Mousa, WANG, Heming and AKID, Robert (2012). Bond strength of hybrid sol–gel coatings with different additives. Journal of Coatings Technology and Research. (In Press)

LEIVA-GARCÍA, R., AKID, Robert, GREENFIELD, David, GITTENS, Jeanette, MUÑOZ-PORTERO, M.J. and GARCÍA-ANTÓN, J. (2012). Study of the sensitisation of a highly alloyed austenitic stainless steel, Alloy 926 (UNS N08926), by means of scanning electrochemical microscopy. Electrochimica Acta, 70, 105-111.

DODDS, Stephen, SMITH, Thomas Smith, AKID, Robert, STEPHENSON, J, NICHOL, Tim, BANERJEE, RD, STOCKLEY, I and TOWNSEND, R (2011). Contrasting effects of physical wear on elution of two antibiotics from orthopaedic cement. Antimicrobial Agents and Chemotherapy, 56 (3), 1471-1475.

AKID, R., GOBARA, M. and WANG, H. (2011). Corrosion protection performance of novel hybrid polyaniline/sol–gel coatings on an aluminium 2024 alloy in neutral, alkaline and acidic solutions. Electrochimica Acta, 56 (5), 2483-2492.

LEWIS, O. D., GREENFIELD, D., AKID, R., DAHM, R. H. and WILCOX, G. D. (2010). Conversion coatings for zinc electrodeposits from modified molybdate solutions. Transactions of the Institute of Metal Finishing, 88 (2), 107-116.

MAY, M., WANG, Heming and AKID, Robert (2010). Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol–gel epoxy system. International Journal of Adhesion and Adhesives, 30 (6), p. 505.

LI, Shu-Xin, LI, Lei, YU, Shu-Rong, AKID, Robert and XIA, Hong-Bo (2010). Investigation of intergranular corrosion of 316L stainless steel diffusion bonded joint by electrochemical potentiokinetic reactivation. Corrosion Science.

WANG, H., AKID, R. and GOBARA, M. (2010). Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route. Corrosion Science, 52 (8), 2565-2570.

GITTENS, J. E., WANG, H., SMITH, T. J., AKID, R. and GREENFIELD, D. (2009). Biotic sol-gel coating for the inhibition of corrosion in seawater. ECS transactions, 24 (1), 211-229.

AKID, R., WANG, H., SMITH, T. J., GREENFIELD, D. and EARTHMAN, J. C. (2008). Biological functionalization of a sol-gel coating for the mitigation of microbial-induced corrosion. Advanced functional materials, 18 (2), 203-211.

WANG, H. and AKID, R. (2008). Encapsulated cerium nitrate inhibitors to provide high-performance anti-corrosion sol-gel coatings on mild steel. Corrosion Science, 50 (4), 1142-1148.

file
LISHCHUK, S. V., AKID, R. and WORDEN, K. (2008). Model-based prognosis for intergranular corrosion. Proc. 4th European Workshop on Structural Health Monitoring, Krakow, Poland, 340-348.

KRAWIEC, H., VIGNAL, V. and AKID, R. (2008). Numerical modelling of the electrochemical behaviour of 316 stainless steel based upon static and dynamic experimental microcapillary-based techniques: effect of electrolyte flow and capillary size. Surface and Interface Analysis, 40 (3-4), 315-319.

KRAWIEC, H., VIGNAL, V. and AKID, R. (2008). Numerical modelling of the electrochemical behaviour of 316L stainless steel based upon static and dynamic experimental microcapillary-based techniques. Electrochimica Acta, 53 (16), 5252-5259.

AKID, R. and WANG, H. (2008). Protective developments - Sol-gel systems show promise in antifouling and anticorrosive systems. European Coatings Journal, 5, 24-28.

LARROUMET, D., GREENFIELD, D., AKID, R. and YARWOOD, J. (2008). Spectroscopic studies of the corrosion of model iron electrodes in carbonate and phosphate buffer solutions. Journal of Raman Spectroscopy, 39 (12), 1740-1748.

file
LISHCHUK, S. V., AKID, R. and WORDEN, K. (2008). A cellular automaton based model for predicting intergranular corrosion in aerospace alloys. Proc. EUROCORR–2008, Edinburgh, UK.

AKID, R. (2007). Hybrid sol gel coatings are customized to fight corrosion. Materials performance, 46 (11), 14-15.

LARROUMET, D., GREENFIELD, D., AKID, R. and YARWOOD, J. (2007). Raman spectroscopic studies of the corrosion of model iron electrodes in sodium chloride solution. Journal of Raman Spectroscopy, 38 (12), 1577-1585.

AKID, Robert, DMYTRAKH, I. M. and GONZALEZ-SANCHEZ, J. (2006). Fatigue damage accumulation: the role of corrosion on the early stages of crack development. Corrosion engineering science and technology, 41 (4), 328-335.

AKID, R. and WANG, H. (2006). Application of sol-gel technology for anticorrosion coatings and surface pretreatments. Galvanotechnik, 97 (9), 2098-2109.

LEWIS, O. D., GREENFIELD, D., AKID, R., DAHM, R. H. and WILCOX, G. W. (2006). SVET investigation into use of simple molybdate passivation treatments on electrodeposited zinc coatings. Transactions of the Institute of Metal Finishing, 84 (4), 188-195.

AKID, R. and WANG, H. (2006). Sol-gel coatings: an alternative corrosion protection system. Corrosion Management (May/June), 9-12.

SCHMITT, C., PLUVINAGE, G., HADJ-TAIEB, E. and AKID, R. (2006). Water pipeline failure due to water hammer effects. Fatigue and fracture of engineering materials and structures, 29 (12), 1075-1082.

AKID, Robert, HOVSEPIAN, Papken and KOK, Y. N. (2005). Tribocorrosion testing of stainless steel (SS) and PVD coated SS using a modified scanning reference electrode technique. Wear, 259 (7-12), 1472-1481.

PETROYIANNIS, P. V., KERMANIDIS, A. T., AKID, R., RODOPOULOS, C. A. and PANTELAKIS, S. G. (2005). Analysis of the effects of exfoliation corrosion on the fatigue behaviour of the 2024-T351 aluminium alloy using the fatigue damage map. International Journal of Fatigue, 27 (7), 817-827.

AKID, Robert and GARMA, M. (2004). Scanning vibrating reference electrode technique: a calibration study to evaluate the optimum operating parameters for maximum signal detection of point source activity. Electrochimica acta, 49 (17-18), 2871-2879.

XU, H., AKID, R., BRUMPTON, G., WANG, H. and RODENBURG, J. M. (2004). Electrochemical and AFM/SEM studies of Ni-Cr electroplated and sol-gel coated samples. In: MCVITIE, S. and MCCOMB, D., (eds.) Electron Microscopy and Analysis 2003. Institute of Physics Conference Series (179). CRC Press, 417-420.

XU, H., AKID, R. and BRUMPTON, G. (2004). Surface characterisation studies of CrVI and CrIII electroplated carbon steel samples. Transactions of the Institute of Metal Finishing, 82, 18-23.

AKID, Robert and MILLS, D. J. (2001). A comparison between conventional macroscopic and novel microscopic scanning electrochemical methods to evaluate galvanic corrosion. Corrosion science, 43 (7), 1203-1216.

HU, H. and AKID, R. (2001). Cathodic-polarization effects on the long/short corrosion-fatigue crack growth rate of an offshore steel. Materials science, 37 (6), 902-909.

MURTAZA, G. and AKID, R. (2000). Empirical corrosion fatigue life prediction models of a high strength steel. Engineering Fracture Mechanics, 67 (5), 461-474.

BREEN, C., AKID, R., HABESCH, S. and SAMMON, C. (2000). How clean is clean? Materials World, 8 (4), 15-17.

WANG, Y. Z., ATKINSON, J., AKID, R. and PARKINS, R. N. (1996). Crack interaction, coalescence and mixed mode fracture mechanics. Fatigue & Fracture Of Engineering Materials And Structures, 19 (1), 51-63.

WANG, Y. Z., AKID, R., CLARKE, A. and ATKINSON, J. D. (1996). Further observations of early fatigue crack development. Fatigue and fracture of engineering materials and structures, 19 (5), 623-627.

This list was generated on Sun Dec 21 03:10:22 2014 GMT.