Items where SHU Author is "Wang, Heming"
|Up a level|
Number of items: 23.
MAY, M, WANG, Heming and AKID, Robert (2016). Influence of adding multiwalled carbon nanotubes on the adhesive strength of composite epoxy/sol–gel materials. Journal of Coatings Technology and Research, 13 (2), 325-332.
WANG, Heming, RAHAQ, Yaqub and KUMAR, Vikas (2016). A composite light-harvesting layer from photoactive polymer and halide perovskite for planar heterojunction solar cells. Scientific Reports, 6 (29567), 1-9.
WANG, Heming and KUMAR, Vikas (2015). Transparent and conductive polysiloxanes/ PEDOT:PSS nanocomposite thin films with a “water-impermeable” property to significantly enhance stability of organic–inorganic hybrid solar cells. RSC Advances, 5 (13), 9650-9657.
SULEIMAN, R, KHALED, M, WANG, H., SMITH, T. J., GITTENS, J, AKID, R., MOHAMED EL ALI, B and KHALIL, A (2014). Comparison of selected inhibitor doped sol–gel coating systems for protection of mild steel. Corrosion engineering science and technology, 49 (3), 189-196.
RAHAQ, Y, WANG, Heming and KUMAR, V (2014). Fabricating the solution-processable inverted photovoltaic devices by the dip-coating method. Organic Electronics, 15 (5), 984-990.
KUMAR, Vikas, WANG, Heming and RODENBURG, Cornelia (2014). High-efficiency inverted polymer solar cells via dual effects of introducing the high boiling point solvent and the high conductive PEDOT:PSS layer. Organic Electronics, 15 (9), 2059-2067.
VIKAS, Kumar and WANG, Heming (2013). Selection of metal substrates for completely solution-processed inverted organic photovoltaic devices. Solar Energy Materials and Solar Cells, 113, 179-185.
MAY, Mousa, WANG, Heming and AKID, Robert (2013). Bond strength of hybrid sol–gel coatings with different additives. Journal of Coatings Technology and Research, 10 (3), 407-413.
KUMAR, Vikas and WANG, Heming (2013). Plasmonic Au nanoparticles for enhanced broadband light absorption in inverted organic photovoltaic devices by plasma assisted physical vapour deposition. Organic Electronics, 14 (2), 560-568.
AKID, R., GOBARA, M. and WANG, H. (2011). Corrosion protection performance of novel hybrid polyaniline/sol–gel coatings on an aluminium 2024 alloy in neutral, alkaline and acidic solutions. Electrochimica Acta, 56 (5), 2483-2492.
MAY, M., WANG, Heming and AKID, Robert (2010). Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol–gel epoxy system. International Journal of Adhesion and Adhesives, 30 (6), p. 505.
WANG, H., AKID, R. and GOBARA, M. (2010). Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route. Corrosion Science, 52 (8), 2565-2570.
GITTENS, J. E., WANG, H., SMITH, T. J., AKID, R. and GREENFIELD, D. (2009). Biotic sol-gel coating for the inhibition of corrosion in seawater. ECS transactions, 24 (1), 211-229.
AKID, R., WANG, H., SMITH, T. J., GREENFIELD, D. and EARTHMAN, J. C. (2008). Biological functionalization of a sol-gel coating for the mitigation of microbial-induced corrosion. Advanced functional materials, 18 (2), 203-211.
WANG, H. and AKID, R. (2008). Encapsulated cerium nitrate inhibitors to provide high-performance anti-corrosion sol-gel coatings on mild steel. Corrosion Science, 50 (4), 1142-1148.
AKID, R. and WANG, H. (2008). Protective developments - Sol-gel systems show promise in antifouling and anticorrosive systems. European Coatings Journal, 5, 24-28.
WANG, H. and AKID, R. (2007). A room temperature cured sol-gel anticorrosion pre-treatment for Al 2024-T3 alloys. Corrosion science, 49 (12), 4491-4503.
AKID, R. and WANG, H. (2006). Application of sol-gel technology for anticorrosion coatings and surface pretreatments. Galvanotechnik, 97 (9), 2098-2109.
AKID, R. and WANG, H. (2006). Sol-gel coatings: an alternative corrosion protection system. Corrosion Management (May/Ju), 9-12.
XU, H., AKID, R., BRUMPTON, G., WANG, H. and RODENBURG, J. M. (2004). Electrochemical and AFM/SEM studies of Ni-Cr electroplated and sol-gel coated samples. In: MCVITIE, S. and MCCOMB, D., (eds.) Electron Microscopy and Analysis 2003. Institute of Physics Conference Series (179). CRC Press, 417-420.
WANG, H., HUANG, Y. Z., RODENBURG, J. M. and SIMMONDS, M. C. (2003). Synthesis of nanosize powders and thin films of Yb-doped YAG by sol-gel methods. Chemistry of materials, 15 (18), 3474-3480.
WANG, H., SIMMONDS, M. C. and RODENBURG, J. M. (2002). Manufacturing of YbAG coatings and crystallisation of the pure and Li2O doped Yb2O3-Al2O3 system by a modified sol-gel method. Materials chemistry and physics, 77 (3), 802-807.
FANG, Zhenyi, CHAI, Yichao, HAO, Yongliang, YANG, Yaoyuan, DONG, Yanping, YAN, Zewu, TIAN, Hongchang, XIAO, Hongtao and WANG, Heming (2002). CVD growth of bulk polycrystalline ZnS and its optical properties. Journal of Crystal Growth, 237-9, 1707-1710.