OKOYEIGBO, O., IBHAZE, A.E., OLAJUBE, A., SHOBAYO, Olamilekan, SOMEFUN, T. and STEVE-ESSI, O. (2021). Design and analysis of a broadband microwave amplifier. Indonesian Journal of Electrical Engineering and Informatics, 9 (1), 210-219.
|
PDF
2708-6225-1-PB.pdf - Published Version Creative Commons Attribution. Download (550kB) | Preview |
Abstract
This paper presents the procedures involved in the design and analysis of a microstrip broadband microwave amplifier. For system design, simulation, optimization and analysis, a Computer Aided Design (CAD) tool known as Agilent Advanced Design System (ADS) was employed. The amplifier device-FLC317MG-4 FET, was tested for stability, and was observed to be unconditionally stable between 2 to 6 GHz frequency band. Two possible ideal matching circuits were investigated to identify the best matching circuit with the maximum transducer power gain. It was observed that the quarter-wave transformer with parallel open circuit stub, gave a high gain at a wider range of frequency (larger bandwidth/ broadband), than the other matching circuit. Hence, it was employed for the broadband amplifier design using microstrips, and achieved a maximum flat gain of about 9.8 dB to 10.118 dB, at a bandwidth of 3.5 to 4.5 GHz.
Item Type: | Article |
---|---|
Additional Information: | The published online date was taken from the page source. |
Identification Number: | https://doi.org/10.11591/ijeei.v9i1.2708 |
Page Range: | 210-219 |
SWORD Depositor: | Symplectic Elements |
Depositing User: | Symplectic Elements |
Date Deposited: | 24 Feb 2022 16:13 |
Last Modified: | 24 Feb 2022 16:13 |
URI: | https://shura.shu.ac.uk/id/eprint/29792 |
Actions (login required)
View Item |
Downloads
Downloads per month over past year