POTTS, Jonathan R. and MASTERS, Dominic (2015). Validation of the aerodynamic loading on basic flying disc geometries derived from CFD simulations. Procedia Engineering, 112, 400-405.
PDF
1-s2.0-S1877705815014642-main.pdf__tid=16e22910-904c-11e5-a037-00000aacb35e&acdnat=1448109398_cf352ad24b14d11ba779661e7b2fe4b7 - Published Version Creative Commons Attribution Non-commercial No Derivatives. Download (1MB) |
|
PDF (Acceptance e-mail)
Potts - 11092.pdf Restricted to Repository staff only Download (107kB) |
Abstract
The present study in spin stabilised disc aerodynamics builds on previous experimental wind tunnel work to broaden the knowledge base through CFD simulation without the necessity for high facility or time cost. The current experimental database from previous studies is extensive enough for sufficient validation to be conducted on known geometries. From there, the limitations of CFD studies for this application on such complex highly separated bluff body flows can be understood. All of the results are for non-spinning discs to reduce computational time, this step is justifiable as the spinning case has previously been shown to have minimal effect on the aerodynamic loads at typical throw release spin rates. The work builds CFD simulation cases carefully and systematically starting with cylindrical discs with thickness to chord (diameter) ratio of 0.01 and 0.1, then to introduce a cavity to one flat side analogous to the Frisbee disc, before moving to look at a generic discus geometry from field athletics. The aerodynamic loading results compare very well to experimental data for the low angle of attack range, however, at higher angles of attack the CFD curves are divergent. It is possible that the generated mesh, for each geometry, does not capture the wake with enough resolution at high angles of attack, note that for sports disc applications the high angle of attack range is very important towards the end of the flight from a human throw. Therefore, further investigations are required to extend this initial study to a modified meshing regime with further refinement, prior to moving forward with any parametric design studies. Keyword - Spin-stabilised; sports disc; discwing; gyroscopic; aerodynamics; cfd
Item Type: | Article |
---|---|
Additional Information: | Published in special issue : 'The Impact of Technology on Sport VI' 7th Asia-Pacific Congress on Sports Technology, APCST2015 |
Research Institute, Centre or Group - Does NOT include content added after October 2018: | Centre for Sports Engineering Research |
Identification Number: | https://doi.org/10.1016/j.proeng.2015.07.215 |
Page Range: | 400-405 |
Depositing User: | Jonathan Potts |
Date Deposited: | 22 Dec 2015 12:04 |
Last Modified: | 18 Mar 2021 05:01 |
URI: | https://shura.shu.ac.uk/id/eprint/11092 |
Actions (login required)
View Item |
Downloads
Downloads per month over past year